Re: [Veritas-bu] Change barcode for a volume do not work !
On Mon, Sep 01, 2008 at 02:38:07PM +0200, Didier BRUN wrote: > Hello, > > The command /usr/openv/volmgr/bin/vmchange -h < EMM server > > -barcode -m do not work ! > I use Netbackup 6.0 MP6. Don't know what to say. Works fine for me on 6.0 MP5 (linux) # vmquery -m V5 | egrep 'ID|barcode' media ID: V5 barcode: V5 # vmchange -barcode XX -m V5 # vmquery -m V5 | egrep 'ID|barcode' media ID: V5 barcode: XX Any messages or warnings generated when you run the command? -- Darren ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Netbackup 6.5.2.a on Windows media servers
Installpath\bin\bpdown -v Installpath\bin\bpps Check to make sure there are no hanging processes Installpath\bin\bpup -v Doug Preston -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Deiter, Scott Sent: Tuesday, September 02, 2008 12:18 PM To: VERITAS-BU@mailman.eng.auburn.edu Subject: [Veritas-bu] Netbackup 6.5.2.a on Windows media servers Now that we completed the upgrade bouncing the services involves selecting some of 13 different entries in the services gui. What is the recommended way to restart the netbackup services on a windows media server? Scott Deiter System Administrator Hanover Direct, Inc. Hanover, PA Voice: 717-633-3298 ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] verify catalog backup
netbackup\bin\bpdown -f -v netbackup\bin\bpps (to make sure everything is actually down) netbackup\bin\bpup -f -v +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Netbackup 6.5.2.a on Windows media servers
On Tue, Sep 2, 2008 at 2:18 PM, Deiter, Scott <[EMAIL PROTECTED]>wrote: > What is the recommended way to restart the netbackup services on a > windows media server? I typically use the bpdown and bpup scripts. They work fine for me. If that's all the server is used for, shutdown -r works fine too. It's Windows after all :-) .../Ed Ed Wilts, RHCE, BCFP, BCSD, SCSP, SCSE [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Gary J Schings/GIS/CSC is on vacation
I will be out of the office starting 09/02/2008 and will not return until 09/03/2008. If you need immediate assistance, please contact Brad Johnson 847-341-0386 or Cheryl Barker 203.228.2852 ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Media server move, now getting 219 errors
I ended up building and running a new policy and it ran fine. I compared the new policy to the one that was there and found the problem was that the schedules still had the old storage unit in it. We wrote a script using bpplschedrep to correct it. Everything is good now, thanks for all the help... Wayne BeDour Unix System Administrator PH: 313-593-9876 Internet: [EMAIL PROTECTED] From: Needham, Timothy [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 02, 2008 2:08 PM To: BeDour, Wayne; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] Media server move, now getting 219 errors Rebuilding the SU works a great deal of the time. Tim Needham IT/Manager * Data Storage and Protection Team Office (480) * 753 * 2525 Mobile (714) * 519 * 1055 Fax (626) * 432 * 9154 [EMAIL PROTECTED] From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of BeDour, Wayne Sent: Tuesday, September 02, 2008 9:59 AM To: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Media server move, now getting 219 errors Well the move finally completed. I was able to run an inventory and now it shows all my media pointing to the correct server. The correct devices and robot are all showing up in the "Devices" window under the correct server. I ran robtest and it found the robot and all drives with the correct addresses. I've pointed my policies to the correct server. I'm still getting the 219 errors when I try to run a backup. I've looked over my changes and can't find anything that looks wrong. I've got to have missed something but can't find it. Anyone have any suggestions? Thanks Wayne BeDour Unix System Administrator PH: 313-593-9876 Internet: [EMAIL PROTECTED] Yea, I caught that also and made the change for the policy I was testing, sorry for not passing that along. I think I may be getting antsy and like you said the move is taking forever. Does the move have to happen on all the tapes in the library before I'll be able to run an inventory? Thanks Wayne BeDour Unix System Administrator PH: 313-593-9876 Internet: [EMAIL PROTECTED] From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 02, 2008 11:11 AM To: BeDour, Wayne Subject: Re: [Veritas-bu] Media server move, now getting 219 errors In my experience, the move could take a looong time. However, one thing that I don't see you have done is to specify the new media server in your backup policies. If they're still pointing at the old one, they will generate 219's. Ken Zufall Technical Analyst D660C The Goodyear Tire & Rubber Company GTN 446.0592 or 330.796.0592 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of BeDour, Wayne Sent: Tuesday, September 02, 2008 10:55 AM To: Ed Wilts Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Media server move, now getting 219 errors Yes to both. Wayne BeDour Unix System Administrator PH: 313-593-9876 Internet: [EMAIL PROTECTED] From: Ed Wilts [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 02, 2008 10:51 AM To: BeDour, Wayne Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Media server move, now getting 219 errors On Tue, Sep 2, 2008 at 9:35 AM, BeDour, Wayne <[EMAIL PROTECTED]> wrote: Our environment is Netbackup 5.1 MP3 HP-UX 11.31 (11i v3). I just removed our media server and am using the master as the media server. I ran a script that did bpmedialist and bpmedia -movedb commands to move my media from the media server to the master server. I have changed my bp.conf and vm.conf files so they no longer have anything from the old media server. I used tpconfig to remove the robot and drives from the old media server. Connected the drives to the master server and can see them via an ioscan. I used the NBU gui to add the robot and drives to the master server. I can see everything on the master server but when I kick off a job I'm getting "EXIT STATUS: 219 - the required storage unit is unavailable" . I tried to run an inventory and am getting "robot number and robot host mismatch". I found a document that says to select all the tapes in the library, click on Actions -> Move and uncheck the Volume is in a robotic library box and click OK. There are about 300 tapes in the library, I did this and it's been sitting there for quite a while. 1. Did you delete the old storage unit? 2. Did you restart NetBackup after removing the storage unit? .../Ed Ed Wilts, RHCE, BCFP, BCSD, SCSP, SCSE [EMAIL PROTECTED] ** ** LEGAL DISCLAIMER ** ** This E-mail message and any attachments may contain legally privileged, confidential or proprietary information. If you are
[Veritas-bu] Netbackup 6.5.2.a on Windows media servers
Now that we completed the upgrade bouncing the services involves selecting some of 13 different entries in the services gui. What is the recommended way to restart the netbackup services on a windows media server? Scott Deiter System Administrator Hanover Direct, Inc. Hanover, PA Voice: 717-633-3298 ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Media server move, now getting 219 errors
If the new storageunit does not have the same name as the old, you may need to change the storageunit in the policy. +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Media server move, now getting 219 errors
Did you try recreating the storage unit using the new configuration of the robot on the master/media server? +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Netbackup 6.5 Client is not validated
This is usually caused by a request to restore files to a client other than the one that made the request and the request did not come from the root user (on UNIX) or the administrator (on Windows) on a NetBackup server. +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Netbackup 6.5 Updating the tapes
Does the robot itself show the barcodes on the media? You can use volmgr\bin\robtest to check, s s to show slots. If the barcodes are not showing up netbackup will not know this is different media from what you removed. Did you use netbackup to eject the media from the robot? +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Hyper-V
I tested backing up Virtual Machines via client installed on the VM when Hyper-V was in beta. There was no advanced "snapshot" type technology supported by anyone that I could find at the time. Long story short, Hyper-V is just about the poorest VM Technology on the market and you'd be better off with just about anything else. Testing stopped there. We are running several copies of VMWare Server (Their "Free" Product) on Windows and backing those guests up via agents without issue. -Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WALLEBROEK Bart Sent: Tuesday, September 02, 2008 12:27 PM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Hyper-V Has anyone of you have experience with Microsoft's Hyper-V and NetBackup? On the support site of Veritas I can not find anything about this new virtualization of Microsoft if it is supported or not. Best Regards, Bart WALLEBROEK Swift ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Netbackup 6.5 Client is not validated
I've never seen this error either. I would suggest you check what user the client running as, and does that user have sufficient rights on the client. (or is the password expired) Enable the bpcd logging or increase verbosity to see if it gives you a more meaningful message. I can't see any restriction on the master server if you initiated restores from that console, but a global setting at the master server (under Client Attributes) can restrict a restore and a file browse at the client computer. p382 NB 6.5 Admin Guide 1 for Windows. -Jon - Original Message From: "Obenschain, Charles T." <[EMAIL PROTECTED]> To: veritas-bu@mailman.eng.auburn.edu Sent: Tuesday, September 2, 2008 9:55:40 AM Subject: [Veritas-bu] Netbackup 6.5 Client is not validated I am running Netbackup 6.5 on a windows server. I was trying to verify the backups, by trying to restore a file, but I keep getting an error that reads: Error! Client is not validated to perform the requested operation. There is no number associated with this error.___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Hyper-V
On Tue, Sep 2, 2008 at 11:26 AM, WALLEBROEK Bart <[EMAIL PROTECTED]>wrote: > Has anyone of you have experience with Microsoft's Hyper-V and > NetBackup? On the support site of Veritas I can not find anything about > this new virtualization of Microsoft if it is supported or not. I don't have any experience with it but I would expect that a Hyper-V guest running a NetBackup client would work. A disk-only media server might work slowly but a tape media server will likely not even work. A master server that does no tape work might work. I would not expect any server functionality to be supported - neither a media server nor a master server If you can't find it on the published compatibility lists, that means it is not supported. .../Ed Ed Wilts, RHCE, BCFP, BCSD, SCSP, SCSE [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Netbackup 6.5 Updating the tapes
I have a Quantum Value loader that has an 8 tape magazine. I have replaced all 8 tapes with fresh ones. I have tried to update the tapes by right clicking the Media and selecting Inventory Robot and selecting Update Volume Configuration, but it just runs and says that the robot and the tapes are configured correctly. What am I doing wrong? Also, the original tapes did not have barcode labels, but the "new" tapes do have bar code labels on them. So the library should be able to tell them apart. Charley Obenschain Systems Administrator SAIC 410-312-3768 [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Media server move, now getting 219 errors
Well the move finally completed. I was able to run an inventory and now it shows all my media pointing to the correct server. The correct devices and robot are all showing up in the "Devices" window under the correct server. I ran robtest and it found the robot and all drives with the correct addresses. I've pointed my policies to the correct server. I'm still getting the 219 errors when I try to run a backup. I've looked over my changes and can't find anything that looks wrong. I've got to have missed something but can't find it. Anyone have any suggestions? Thanks Wayne BeDour Unix System Administrator PH: 313-593-9876 Internet: [EMAIL PROTECTED] Yea, I caught that also and made the change for the policy I was testing, sorry for not passing that along. I think I may be getting antsy and like you said the move is taking forever. Does the move have to happen on all the tapes in the library before I'll be able to run an inventory? Thanks Wayne BeDour Unix System Administrator PH: 313-593-9876 Internet: [EMAIL PROTECTED] From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 02, 2008 11:11 AM To: BeDour, Wayne Subject: Re: [Veritas-bu] Media server move, now getting 219 errors In my experience, the move could take a looong time. However, one thing that I don't see you have done is to specify the new media server in your backup policies. If they're still pointing at the old one, they will generate 219's. Ken Zufall Technical Analyst D660C The Goodyear Tire & Rubber Company GTN 446.0592 or 330.796.0592 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of BeDour, Wayne Sent: Tuesday, September 02, 2008 10:55 AM To: Ed Wilts Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Media server move, now getting 219 errors Yes to both. Wayne BeDour Unix System Administrator PH: 313-593-9876 Internet: [EMAIL PROTECTED] From: Ed Wilts [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 02, 2008 10:51 AM To: BeDour, Wayne Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Media server move, now getting 219 errors On Tue, Sep 2, 2008 at 9:35 AM, BeDour, Wayne <[EMAIL PROTECTED]> wrote: Our environment is Netbackup 5.1 MP3 HP-UX 11.31 (11i v3). I just removed our media server and am using the master as the media server. I ran a script that did bpmedialist and bpmedia -movedb commands to move my media from the media server to the master server. I have changed my bp.conf and vm.conf files so they no longer have anything from the old media server. I used tpconfig to remove the robot and drives from the old media server. Connected the drives to the master server and can see them via an ioscan. I used the NBU gui to add the robot and drives to the master server. I can see everything on the master server but when I kick off a job I'm getting "EXIT STATUS: 219 - the required storage unit is unavailable" . I tried to run an inventory and am getting "robot number and robot host mismatch". I found a document that says to select all the tapes in the library, click on Actions -> Move and uncheck the Volume is in a robotic library box and click OK. There are about 300 tapes in the library, I did this and it's been sitting there for quite a while. 1. Did you delete the old storage unit? 2. Did you restart NetBackup after removing the storage unit? .../Ed Ed Wilts, RHCE, BCFP, BCSD, SCSP, SCSE [EMAIL PROTECTED] ** ** LEGAL DISCLAIMER ** ** This E-mail message and any attachments may contain legally privileged, confidential or proprietary information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution or copying of this E-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this E-mail message from your computer. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Netbackup 6.5 Client is not validated
I am running Netbackup 6.5 on a windows server. I was trying to verify the backups, by trying to restore a file, but I keep getting an error that reads: Error! Client is not validated to perform the requested operation. There is no number associated with this error. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Hyper-V
Has anyone of you have experience with Microsoft's Hyper-V and NetBackup? On the support site of Veritas I can not find anything about this new virtualization of Microsoft if it is supported or not. Best Regards, Bart WALLEBROEK Swift ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Change barcode for a volume do not work !
Are you getting any error messages when you run the command? +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Media server move, now getting 219 errors
Yes to both. Wayne BeDour Unix System Administrator PH: 313-593-9876 Internet: [EMAIL PROTECTED] From: Ed Wilts [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 02, 2008 10:51 AM To: BeDour, Wayne Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Media server move, now getting 219 errors On Tue, Sep 2, 2008 at 9:35 AM, BeDour, Wayne <[EMAIL PROTECTED]> wrote: Our environment is Netbackup 5.1 MP3 HP-UX 11.31 (11i v3). I just removed our media server and am using the master as the media server. I ran a script that did bpmedialist and bpmedia -movedb commands to move my media from the media server to the master server. I have changed my bp.conf and vm.conf files so they no longer have anything from the old media server. I used tpconfig to remove the robot and drives from the old media server. Connected the drives to the master server and can see them via an ioscan. I used the NBU gui to add the robot and drives to the master server. I can see everything on the master server but when I kick off a job I'm getting "EXIT STATUS: 219 - the required storage unit is unavailable" . I tried to run an inventory and am getting "robot number and robot host mismatch". I found a document that says to select all the tapes in the library, click on Actions -> Move and uncheck the Volume is in a robotic library box and click OK. There are about 300 tapes in the library, I did this and it's been sitting there for quite a while. 1. Did you delete the old storage unit? 2. Did you restart NetBackup after removing the storage unit? .../Ed Ed Wilts, RHCE, BCFP, BCSD, SCSP, SCSE [EMAIL PROTECTED] ** ** LEGAL DISCLAIMER ** ** This E-mail message and any attachments may contain legally privileged, confidential or proprietary information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution or copying of this E-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this E-mail message from your computer.___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Migration Problem / Question Please
On Tue, Sep 2, 2008 at 7:25 AM, WEAVER, Simon (external) < [EMAIL PROTECTED]> wrote: > Ideally it would only be for restores, but it would only be short term. > When upgrading a Media Server, will the 6.5 setup still require a new > license key for EACH media Server, or is it clever enough to know this is > going to be an upgraded box? > Both. You should get new license keys but you don't really need them on media servers. On master servers, you will not get all of the functionality you're entitled to (BMR, client encryption) until you install updated license keys. Play it safe and get all of the new license keys as soon as you can - the longer you wait, the harder it gets (spoken from experience here!) > > -- > *From:* Renee Carlisle [mailto:[EMAIL PROTECTED] > *Sent:* Tuesday, September 02, 2008 12:35 PM > *To:* WEAVER, Simon (external); VERITAS-BU@mailman.eng.auburn.edu > *Subject:* RE: Migration Problem / Question Please > > If it is just for restore purposes, why don't you just force all restores > to go through the master server? While you technically can run a 5.1 media > server in a 6.5 environment, you wouldn't want to for very long. > Personally, in an SSO environment..I wouldn't want to do it at all. If you > did…I think you would need to build your new env as 5.1 including all the > SSO media servers and then upgrade the new environment. > > > > You may want to think about making some/all of the SSO SAN media servers > SAN Clients in the new environment. Good luck > > > > *From:* [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] *On Behalf Of *WEAVER, Simon > (external) > *Sent:* Tuesday, September 02, 2008 4:02 AM > *To:* VERITAS-BU@mailman.eng.auburn.edu > *Subject:* [Veritas-bu] Migration Problem / Question Please > > > > Morning everyone. > I have been unable to find any help on this, and wanted to see if anyone > could advise or shed any light on this. > > Current Environment 5.1 MP5 Master + Many SSO SAN Media Servers > > I am geting a brand new system, all licensed and new hardware / robot for > 6.5. At this stage, due to issues, I am not planning to "upgrade" 5.1 at > this time. > > I want to migrate the clients to the new system, and I have a plan to do > this for the majority of the clients, except the SAN SSO Clients. > > My question is as follows: If I have a SAN SSO Media Client at 5.1 MP5, > could I simply "point" this client to my new 6.5 Master Server? > > I ask this, because during the migration, there may be a need for a > restore. As its current Master is 5.1, it would be good if I could simply > restore back from the 5.1 environment, but backup to the new 6.5 > environment. > > I recall that the command "nbpushdata -modify_5_x_hosts" needs to be run if > you are "not" upgrading a 5.1 Media Server. > > Could anyone advise? > Thank you > > * > * > .../Ed Ed Wilts, RHCE, BCFP, BCSD, SCSP, SCSE [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Media server move, now getting 219 errors
On Tue, Sep 2, 2008 at 9:35 AM, BeDour, Wayne <[EMAIL PROTECTED]> wrote: > Our environment is Netbackup 5.1 MP3 HP-UX 11.31 (11i v3). I just > removed our media server and am using the master as the media server. I ran > a script that did bpmedialist and bpmedia –movedb commands to move my media > from the media server to the master server. I have changed my bp.conf and > vm.conf files so they no longer have anything from the old media server. I > used tpconfig to remove the robot and drives from the old media server. > Connected the drives to the master server and can see them via an ioscan. I > used the NBU gui to add the robot and drives to the master server. I can > see everything on the master server but when I kick off a job I'm getting > "EXIT STATUS: 219 - the required storage unit is unavailable" . I tried to > run an inventory and am getting "robot number and robot host mismatch". I > found a document that says to select all the tapes in the library, click on > Actions -> Move and uncheck the Volume is in a robotic library box and click > OK. There are about 300 tapes in the library, I did this and it's been > sitting there for quite a while. > 1. Did you delete the old storage unit? 2. Did you restart NetBackup after removing the storage unit? .../Ed Ed Wilts, RHCE, BCFP, BCSD, SCSP, SCSE [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Media server move, now getting 219 errors
Our environment is Netbackup 5.1 MP3 HP-UX 11.31 (11i v3). I just removed our media server and am using the master as the media server. I ran a script that did bpmedialist and bpmedia -movedb commands to move my media from the media server to the master server. I have changed my bp.conf and vm.conf files so they no longer have anything from the old media server. I used tpconfig to remove the robot and drives from the old media server. Connected the drives to the master server and can see them via an ioscan. I used the NBU gui to add the robot and drives to the master server. I can see everything on the master server but when I kick off a job I'm getting "EXIT STATUS: 219 - the required storage unit is unavailable" . I tried to run an inventory and am getting "robot number and robot host mismatch". I found a document that says to select all the tapes in the library, click on Actions -> Move and uncheck the Volume is in a robotic library box and click OK. There are about 300 tapes in the library, I did this and it's been sitting there for quite a while. Anyone have any suggestions or know if I've missed something? Anyone know how long this move may take? Thanks in advance... Wayne BeDour Unix System Administrator PH: 313-593-9876 Internet: [EMAIL PROTECTED] ** ** LEGAL DISCLAIMER ** ** This E-mail message and any attachments may contain legally privileged, confidential or proprietary information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution or copying of this E-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this E-mail message from your computer.___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Migration Problem / Question Please
Renee, Not looking at this long term at all. Sooner I can move the SSO SAN boxes over the 6.5, the better. Not possible to made SAN Media Servers as clients at this stage. Ideally it would only be for restores, but it would only be short term. When upgrading a Media Server, will the 6.5 setup still require a new license key for EACH media Server, or is it clever enough to know this is going to be an upgraded box? Simon From: Renee Carlisle [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 02, 2008 12:35 PM To: WEAVER, Simon (external); VERITAS-BU@mailman.eng.auburn.edu Subject: RE: Migration Problem / Question Please If it is just for restore purposes, why don't you just force all restores to go through the master server? While you technically can run a 5.1 media server in a 6.5 environment, you wouldn't want to for very long. Personally, in an SSO environment..I wouldn't want to do it at all. If you did...I think you would need to build your new env as 5.1 including all the SSO media servers and then upgrade the new environment. You may want to think about making some/all of the SSO SAN media servers SAN Clients in the new environment. Good luck From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, Simon (external) Sent: Tuesday, September 02, 2008 4:02 AM To: VERITAS-BU@mailman.eng.auburn.edu Subject: [Veritas-bu] Migration Problem / Question Please Morning everyone. I have been unable to find any help on this, and wanted to see if anyone could advise or shed any light on this. Current Environment 5.1 MP5 Master + Many SSO SAN Media Servers I am geting a brand new system, all licensed and new hardware / robot for 6.5. At this stage, due to issues, I am not planning to "upgrade" 5.1 at this time. I want to migrate the clients to the new system, and I have a plan to do this for the majority of the clients, except the SAN SSO Clients. My question is as follows: If I have a SAN SSO Media Client at 5.1 MP5, could I simply "point" this client to my new 6.5 Master Server? I ask this, because during the migration, there may be a need for a restore. As its current Master is 5.1, it would be good if I could simply restore back from the 5.1 environment, but backup to the new 6.5 environment. I recall that the command "nbpushdata -modify_5_x_hosts" needs to be run if you are "not" upgrading a 5.1 Media Server. Could anyone advise? Thank you Regards Simon This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 REGISTERED OFFICE:- Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 REGISTERED OFFICE:- Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Migration Problem / Question Please
If it is just for restore purposes, why don't you just force all restores to go through the master server? While you technically can run a 5.1 media server in a 6.5 environment, you wouldn't want to for very long. Personally, in an SSO environment..I wouldn't want to do it at all. If you did...I think you would need to build your new env as 5.1 including all the SSO media servers and then upgrade the new environment. You may want to think about making some/all of the SSO SAN media servers SAN Clients in the new environment. Good luck From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, Simon (external) Sent: Tuesday, September 02, 2008 4:02 AM To: VERITAS-BU@mailman.eng.auburn.edu Subject: [Veritas-bu] Migration Problem / Question Please Morning everyone. I have been unable to find any help on this, and wanted to see if anyone could advise or shed any light on this. Current Environment 5.1 MP5 Master + Many SSO SAN Media Servers I am geting a brand new system, all licensed and new hardware / robot for 6.5. At this stage, due to issues, I am not planning to "upgrade" 5.1 at this time. I want to migrate the clients to the new system, and I have a plan to do this for the majority of the clients, except the SAN SSO Clients. My question is as follows: If I have a SAN SSO Media Client at 5.1 MP5, could I simply "point" this client to my new 6.5 Master Server? I ask this, because during the migration, there may be a need for a restore. As its current Master is 5.1, it would be good if I could simply restore back from the 5.1 environment, but backup to the new 6.5 environment. I recall that the command "nbpushdata -modify_5_x_hosts" needs to be run if you are "not" upgrading a 5.1 Media Server. Could anyone advise? Thank you Regards Simon This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 REGISTERED OFFICE:- Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Netbackup security policies
I would like to give certain server admin's permission to only restore their own server(s) Can this be achived with Access Management within Netbackup? (using the Symantec Authorization services etc) The Netbackup Security and Encryption Guide has information about this, but it remains unclear if it's possible to assign certain servers to users. Thanks _ Be the filmmaker you always wanted to be—learn how to burn a DVD with Windows®. http://clk.atdmt.com/MRT/go/108588797/direct/01/___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Migration Problem / Question Please
Morning everyone. I have been unable to find any help on this, and wanted to see if anyone could advise or shed any light on this. Current Environment 5.1 MP5 Master + Many SSO SAN Media Servers I am geting a brand new system, all licensed and new hardware / robot for 6.5. At this stage, due to issues, I am not planning to "upgrade" 5.1 at this time. I want to migrate the clients to the new system, and I have a plan to do this for the majority of the clients, except the SAN SSO Clients. My question is as follows: If I have a SAN SSO Media Client at 5.1 MP5, could I simply "point" this client to my new 6.5 Master Server? I ask this, because during the migration, there may be a need for a restore. As its current Master is 5.1, it would be good if I could simply restore back from the 5.1 environment, but backup to the new 6.5 environment. I recall that the command "nbpushdata -modify_5_x_hosts" needs to be run if you are "not" upgrading a 5.1 Media Server. Could anyone advise? Thank you Regards Simon This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 REGISTERED OFFICE:- Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu