R: firewall question...
Display number equals to: 0: if you want VNCServer to listen to connections on TCP port 5900 1: if you want VNCServer to listen to connections on TCP port 5901 2: if you want VNCServer to listen to connections on TCP port 5902 . . . etc Cheers Livio Curzola Software Engineer Gsm : +39 0481 523874 mail : [EMAIL PROTECTED] tt telematica e trasporti srl visit our web: www.t-t.it Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] ** Questo documento h indirizzato a ,h potr` essere letto dalle persone a cui h indirizzato. Il suo contenuto h confidenziale e se avete ricevuto questo messaggio per errore , vi preghiamo di cancellarlo e d'informare immediatamente [EMAIL PROTECTED]. Ogni forma di riproduzione , distribuzione, copia, diffusione, modifica, a o di pubblicazione di questo messaggio senza il nostro Consenso scritto h strettamente proibito. Qualsiasi punto di vista espresso in questo messaggio h del solo mittente , e non , necessariamente rappresenta la posizione della tt. Di conseguenza tt non autorizza o usa l'e mail qualke corrispondenza contrattuale. Niente ricevuto via mail ha validit` contrattuale. Tt si riserva il diritto doi monitorare tutte le comunicazioni mail circolanti sulla propria rete. Questa nota conferma l'avvenuto controllo del messaggio da virus noti. This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail [EMAIL PROTECTED]. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of tt. Furthermore tt does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. tt reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. ** -Messaggio originale- Da: David Netzer [mailto:[EMAIL PROTECTED] Inviato: lunedl 31 maggio 2004 10.04 A: [EMAIL PROTECTED] Oggetto: firewall question... I red about VNC under Fire wall. that the port 5900+Display number should be added for it to work. What exactly is Display number ? Thank you. David,Oztec comp. ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
Re: VNC Listening mode under Linux / vncconnect
Hello, thank you for your answers. We now made some more trials with VNC on Linux / SuSE 9.1 and we got listening mode and vncconnect working, but there are still some questions. First I explain what we have done and what is working: We startet the vnc viewer on the client with: vncviewer -listen Than we started the vnc server on the server machine with vncserver -query localhost After this we execute the following command on the server machine: vncconnect -display :1 IP of the client This command opens the vnc viewer on the client machine and shows the graphical kdm login. O.K. Fine, but that is not exactly that what we want. We want to share the actual X-Display (view only) with the clients. For example like the vnc server integrated in kde (krfb) shares the actual running X-Display with a client. But unfortunally, it seems krfb don't work together with vncconnect. Is there a way to connect the vnc server to the actual viewed X-Display with the vncserver command? Or ist there at least a way to access the X-Display of the vnc server if the server is started like described above? O.K. I can connect with vncviewer localhost:1. But I see no way how to give the vnc viewer on localhost full access to the locale vnc server and the remote clients view only access. ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
Re: Port Forwarding Issue
Rick: Heya. Just try forwarding TCP 5900 across your router, not a whole range of ports. Get that working and tested with the www.GoToMyVNC.com scan, and you should be ready. More info on VNC and routers here: http://faq.gotomyvnc.com/fom-serve/cache/63.html Hope this helps! -Scott I have been unable to make port forwarding work with my Dell TrueMobile2300 Wireless Router to connect to a VNC server behind the router. I set up custom port forwarding in the router using the following parameters ... Service Name: VNC Incoming ports from 5900 to 5910 Destination IP 192.168.2.2 (the machine running the server) Destination MAC 00 07 E9 4D 25 EE (the above machine's MAC according to the router Destination port from 20 to 6000 Port Type tcp Would appreciate any help on getting this to work. ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
Re: Read FAQ did a lot of testing but still can not connect
Open Mouth insert foot. Ok I got to work Monday and tried to access my home PC I have the correct IP address and I had the wife check it before and after I tried to connect Shes at home, but not that good a computers -- Still can not connect. I have removed the router and I am just connecting straight from the cable modem, I asked Road Runner if they block ports 5900 5800 - No they do not. Again It seems to work internally - Loopback Connection - I tried telnet to port 5900 at home and connect got the RFB 003.003. At work I can not connect. Also tried the WEB Java - At home I can connect - At work I can Not. If my work blocks VNC I should be able to connect via Web ?? - At work they do use VNC also.So I would assume they dont block it. Also would it matter if at work I am behind a firewall and at a workstation on a large NAT internall network ?? I am going to try to have my dad try it at his house to connect to my home PC next but can get him till late tonight. And hes not good with PCs also. Im no expert but not really a total newbieBUT what am I missing. I thought that the router was my problem but as it seems it was not. I have the VNC up and running have the correct IP address, open viewer and type in address what am I doing wrong - is there some setting that I missed at home that is not working ?? what more can you setup at the server. All I saw was the password.thats it ?? What more info can I provided To help anyone help me fix my connection problems. Lost again.. Opie - Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
Re: Read FAQ did a lot of testing but still can not connect
Ok, Dad can connect both ways from his home pc to my pc - Viewer Java web connect So it will work externally At work I can not connect - both ways fail to connect - is there any way to find out what is stopping the connection from my Work Pc - I am behind a large network with a firewall - and the ip address is most likley going to change with each day that I work at a diffrent station so I can't use add client to my home PC ?? Any Ideas on this one ?? Thanks - But still lost.. Opie Brian Patterson Site Admin WebMaster http://www.TackleBoxClub.com - Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
dynamic desktop resizing
Dear VNC list: I am a new user to version 4 and I don't understand how to get the desktop to resize. If I start VNC without any options the desktop is 1024x768. Then I might switch to a bigger monitor and would want a desktop that is 1280x1024, or vice versa. How do I do this? Darren __ Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger. http://messenger.yahoo.com/ ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
dynamic desktop resizing
Dear VNC list: I am a new user to version 4 and I don't understand how to get the desktop to resize. If I start VNC without any options the desktop is 1024x768. Then I might switch to a bigger monitor and would want a desktop that is 1280x1024, or vice versa. How do I do this? Sorry if this is listed somewhere, but I have looked through the mail list and documentation and seem to have missed this. Darren __ Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger. http://messenger.yahoo.com/ ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
Newbie question - windows startup
Hi - I have just installed VNC for a client to allow me to access his PC (Win XP Pro on both client and server). But he does not want VNC to startup automatically - only when / as needed. I am happy to only use this when the client is logged on and at the PC - what do I change in the setup? (And I have searched the archives for details before posting this question). Many thanks in advance. Kath Pelletti Software Design Solutions Pty Ltd. Ph: 9505-6714 Fax: 9505-6430 [EMAIL PROTECTED] ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
