Re: [Fedora-xen] xen 3.4.3 SRPM / console problem
Host lockup OS is: Linux seanl64.xx.com 2.6.32.14-1.2.107.xendom0.fc12.x86_64 #1 SMP Wed Jun 16 19:26:35 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux xen-4.0.1-0.1.rc3.fc12.x86_64 livelock appears to be related to the network driver interrupt (source: from scanning the news groups). The network LED is flashing continuously, but the system is locked up from the console. We cannot SSH into the box anymore. Could this be related to interrupt priorities (don't know the hardware ins and outs of that). We have a serial captcha of the XEN output!! Here is the suspicious piece: (XEN) MCE: MSR 417 is not MCA MSR (XEN) traps.c:2854: GPF (): 82c4801ae806 -> 82c4801f7cb3 (XEN) vlapic.c:702:d13 Local APIC Write to read-only register 0x30 (XEN) vlapic.c:702:d13 Local APIC Write to read-only register 0x20 (XEN) vlapic.c:702:d13 Local APIC Write to read-only register 0x20 (XEN) irq.c:243: Dom13 PCI link 0 changed 5 -> 0 (XEN) irq.c:243: Dom13 PCI link 1 changed 10 -> 0 (XEN) irq.c:243: Dom13 PCI link 2 changed 11 -> 0 (XEN) irq.c:243: Dom13 PCI link 3 changed 5 -> 0 (XEN) rtc.c:296: HVM RTC: dom 2 skipping 1683748570 seconds (XEN) rtc.c:296: HVM RTC: dom 13 skipping 1683749071 seconds (XEN) rtc.c:296: HVM RTC: dom 2 skipping 86402 seconds (XEN) rtc.c:296: HVM RTC: dom 13 skipping 91586 seconds (XEN) rtc.c:296: HVM RTC: dom 2 skipping 86408 seconds (XEN) rtc.c:296: HVM RTC: dom 13 skipping 92211 seconds (XEN) rtc.c:296: HVM RTC: dom 13 skipping 86456 seconds (XEN) rtc.c:296: HVM RTC: dom 2 skipping 94532 seconds (XEN) rtc.c:296: HVM RTC: dom 2 skipping 86402 seconds (XEN) rtc.c:296: HVM RTC: dom 13 skipping 94742 seconds Note the "skipping 1683748570 seconds" which is more than 53 years. But we haven't had the computer switched on for that long :-) Cheers V On Thu, 1 Jul 2010 09:25:48 am Virgil wrote: > Update: > > Completely stable with 7 VMs. Hasn't missed a beat for several days now. > > Will now run the pings again in 2 of 64PV from the virtual consoles (no > graphics - and disconnected) and see if the host clock tick dies again. > > Cheers > V > > On Thu, 24 Jun 2010 03:17:51 pm Virgil wrote: > > Quick update: > > > > Added 3 more VMs. Total of 7 now on this "desktop" computer. > > > > 3x32PCFC6 > > 1x32HVFC12 > > 1x32HVwinXP-pro > > 2x64PVFC12 > > > > Host is maxed out now. > > > > Everything going well when the pings are not running in the 64PVFC12 > > machines. > > > > Will leave it going for another couple of days. > > > > Cheers > > V > > > > p.s. FYI Samba4-Alpha12 Active Directory controller is working well on > > 64PVFC12. > > > > On Wed, 23 Jun 2010 05:18:56 pm Virgil wrote: > > > On Wed, 23 Jun 2010 03:30:52 pm Pasi Kärkkäinen wrote: > > > > On Wed, Jun 23, 2010 at 11:11:58AM +1000, Virgil wrote: > > > > > Hi Pasi, > > > > > > > > > > Had a hiccup overnite: > > > > > > > > > > The host became unresponsive in a weird way. The time stopped > > > > > incrementing. > > > > > > > > > > Turns out the clock stopped ticking (which I put down to the > > > > > interrupts being disconnected). > > > > > > > > > > Anyway I decided I'd reset the time using 'time -s 10:41:30'. > > > > > > > > > > Kaboom, or actually deathly silence. The machine fully stopped dead > > > > > in its tracks. > > > > > > > > > > Just prior to this I connected to the console of one of the 64PV > > > > > machines which was just running a ping from yesterday. Anyway, > > > > > 60,000 or so lines of pings went to the console zipping up the > > > > > screen. Then it was dead. I did a CTRL-C and eventually it > > > > > returned to the prompt. > > > > > > > > > > So I looked at the other 64PV machine, which was also pining, and > > > > > identical situation. > > > > > > > > > > So I reckon, there's some kind of buffer overflow going on when > > > > > you're not "xm console MACHINE" connected. Once you pass 60,000 > > > > > lines of text this buffer overflow causes the RTC to hangup > > > > > somehow. > > > > > > > > Do you have xenconsoled running? > > > > > > > > I've noticed PV guests that print a lot to the console will stall if > > > > xenconsoled is not running.. xenconsoled needs to clear the guest > > > > console buffer.. > > > > > > > > -- Pasi > > > > > > Seems to be now. Pretty sure it was then too. > > > > > > udev-post 0:off 1:on2:on3:on4:on5:on6:off > > > wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off > > > xenconsoled 0:off 1:off 2:off 3:on4:on5:on6:off > > > xend0:off 1:off 2:off 3:on4:on5:on6:off > > > xendomains 0:off 1:off 2:off 3:on4:on5:on6:off > > > xenstored 0:off 1:off 2:off 3:on4:on5:on6:off > > > ypbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off > > > [r...@seanl64 ~]# ps -ef | grep xenconso > > > root 1508 1 0 10:19 ?00:00:00 /usr/sbin/xenconsoled > > > --log=none --log-dir=/var/log/xen/con
Re: [Fedora-xen] xen 3.4.3 SRPM / console problem
Update: Completely stable with 7 VMs. Hasn't missed a beat for several days now. Will now run the pings again in 2 of 64PV from the virtual consoles (no graphics - and disconnected) and see if the host clock tick dies again. Cheers V On Thu, 24 Jun 2010 03:17:51 pm Virgil wrote: > Quick update: > > Added 3 more VMs. Total of 7 now on this "desktop" computer. > > 3x32PCFC6 > 1x32HVFC12 > 1x32HVwinXP-pro > 2x64PVFC12 > > Host is maxed out now. > > Everything going well when the pings are not running in the 64PVFC12 > machines. > > Will leave it going for another couple of days. > > Cheers > V > > p.s. FYI Samba4-Alpha12 Active Directory controller is working well on > 64PVFC12. > > On Wed, 23 Jun 2010 05:18:56 pm Virgil wrote: > > On Wed, 23 Jun 2010 03:30:52 pm Pasi Kärkkäinen wrote: > > > On Wed, Jun 23, 2010 at 11:11:58AM +1000, Virgil wrote: > > > > Hi Pasi, > > > > > > > > Had a hiccup overnite: > > > > > > > > The host became unresponsive in a weird way. The time stopped > > > > incrementing. > > > > > > > > Turns out the clock stopped ticking (which I put down to the > > > > interrupts being disconnected). > > > > > > > > Anyway I decided I'd reset the time using 'time -s 10:41:30'. > > > > > > > > Kaboom, or actually deathly silence. The machine fully stopped dead > > > > in its tracks. > > > > > > > > Just prior to this I connected to the console of one of the 64PV > > > > machines which was just running a ping from yesterday. Anyway, 60,000 > > > > or so lines of pings went to the console zipping up the screen. Then > > > > it was dead. I did a CTRL-C and eventually it returned to the prompt. > > > > > > > > So I looked at the other 64PV machine, which was also pining, and > > > > identical situation. > > > > > > > > So I reckon, there's some kind of buffer overflow going on when > > > > you're not "xm console MACHINE" connected. Once you pass 60,000 > > > > lines of text this buffer overflow causes the RTC to hangup somehow. > > > > > > Do you have xenconsoled running? > > > > > > I've noticed PV guests that print a lot to the console will stall if > > > xenconsoled is not running.. xenconsoled needs to clear the guest > > > console buffer.. > > > > > > -- Pasi > > > > Seems to be now. Pretty sure it was then too. > > > > udev-post 0:off 1:on2:on3:on4:on5:on6:off > > wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off > > xenconsoled 0:off 1:off 2:off 3:on4:on5:on6:off > > xend0:off 1:off 2:off 3:on4:on5:on6:off > > xendomains 0:off 1:off 2:off 3:on4:on5:on6:off > > xenstored 0:off 1:off 2:off 3:on4:on5:on6:off > > ypbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off > > [r...@seanl64 ~]# ps -ef | grep xenconso > > root 1508 1 0 10:19 ?00:00:00 /usr/sbin/xenconsoled > > --log=none --log-dir=/var/log/xen/console root 7815 7732 0 17:07 > > pts/500:00:00 grep xenconso > > > > Cheers > > V > > > > > > I pressed the reset button, but this time the 2 64PV machines are not > > > > logged in. I'll just let it go and see if it keeps going. > > > > > > > > Cheers > > > > V > > > > > > > > On Tue, 22 Jun 2010 04:29:06 pm Pasi Kärkkäinen wrote: > > > > > On Tue, Jun 22, 2010 at 12:03:53PM +1000, Virgil wrote: > > > > > > Hi Pasi, > > > > > > > > > > > > On Mon, 21 Jun 2010 08:57:55 pm Pasi Kärkkäinen wrote: > > > > > > > On Mon, Jun 21, 2010 at 01:56:36PM +0300, Pasi Kärkkäinen wrote: > > > > > > > > On Mon, Jun 21, 2010 at 02:28:15PM +1000, Virgil wrote: > > > > > > > > > Another quick update > > > > > > > > > > > > > > > > > > xen-4.0.1-0.1.rc3.fc13.src.rpm just compiled this under > > > > > > > > > fc12. > > > > > > > > > > > > > > > > > > Identical results with this too (i.e. it's probably in the > > > > > > > > > kernel). > > > > > > > > > > > > > > > > > > I have a (silly) idea for the serial console. The wiki page > > > > > > > > > recommends using a phone camera to capture the screen > > > > > > > > > > > > > > > > > > Well my idea is to add an n-millisecond delay every time > > > > > > > > > the output stream in Xen sees a \n. This would delay the > > > > > > > > > screen updates enough for the camera to see them. The n > > > > > > > > > should be configurable on the kernel boot command line. > > > > > > > > > It's set to 0 right now. > > > > > > > > > > > > > > > > Yeah, we really need to get a log somehow to troubleshoot > > > > > > > > your problem. > > > > > > > > > > > > > > > > Serial console log would be the best: > > > > > > > > http://wiki.xensource.com/xenwiki/XenSerialConsole > > > > > > > > > > > > > > Btw are you running the latest kernel: > > > > > > > http://koji.fedoraproject.org/koji/taskinfo?taskID=2254110 > > > > > > > > > > > > > > Or are you running custom/self compiled kernel? > > > > > > > > > > > > Everything is working with: > > > > > > xen-
Re: [Fedora-xen] xen 3.4.3 SRPM / console problem
Quick update: Added 3 more VMs. Total of 7 now on this "desktop" computer. 3x32PCFC6 1x32HVFC12 1x32HVwinXP-pro 2x64PVFC12 Host is maxed out now. Everything going well when the pings are not running in the 64PVFC12 machines. Will leave it going for another couple of days. Cheers V p.s. FYI Samba4-Alpha12 Active Directory controller is working well on 64PVFC12. On Wed, 23 Jun 2010 05:18:56 pm Virgil wrote: > On Wed, 23 Jun 2010 03:30:52 pm Pasi Kärkkäinen wrote: > > On Wed, Jun 23, 2010 at 11:11:58AM +1000, Virgil wrote: > > > Hi Pasi, > > > > > > Had a hiccup overnite: > > > > > > The host became unresponsive in a weird way. The time stopped > > > incrementing. > > > > > > Turns out the clock stopped ticking (which I put down to the interrupts > > > being disconnected). > > > > > > Anyway I decided I'd reset the time using 'time -s 10:41:30'. > > > > > > Kaboom, or actually deathly silence. The machine fully stopped dead in > > > its tracks. > > > > > > Just prior to this I connected to the console of one of the 64PV > > > machines which was just running a ping from yesterday. Anyway, 60,000 > > > or so lines of pings went to the console zipping up the screen. Then > > > it was dead. I did a CTRL-C and eventually it returned to the prompt. > > > > > > So I looked at the other 64PV machine, which was also pining, and > > > identical situation. > > > > > > So I reckon, there's some kind of buffer overflow going on when you're > > > not "xm console MACHINE" connected. Once you pass 60,000 lines of text > > > this buffer overflow causes the RTC to hangup somehow. > > > > Do you have xenconsoled running? > > > > I've noticed PV guests that print a lot to the console will stall if > > xenconsoled is not running.. xenconsoled needs to clear the guest console > > buffer.. > > > > -- Pasi > > Seems to be now. Pretty sure it was then too. > > udev-post 0:off 1:on2:on3:on4:on5:on6:off > wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off > xenconsoled 0:off 1:off 2:off 3:on4:on5:on6:off > xend0:off 1:off 2:off 3:on4:on5:on6:off > xendomains 0:off 1:off 2:off 3:on4:on5:on6:off > xenstored 0:off 1:off 2:off 3:on4:on5:on6:off > ypbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off > [r...@seanl64 ~]# ps -ef | grep xenconso > root 1508 1 0 10:19 ?00:00:00 /usr/sbin/xenconsoled > --log=none --log-dir=/var/log/xen/console root 7815 7732 0 17:07 > pts/500:00:00 grep xenconso > > Cheers > V > > > > I pressed the reset button, but this time the 2 64PV machines are not > > > logged in. I'll just let it go and see if it keeps going. > > > > > > Cheers > > > V > > > > > > On Tue, 22 Jun 2010 04:29:06 pm Pasi Kärkkäinen wrote: > > > > On Tue, Jun 22, 2010 at 12:03:53PM +1000, Virgil wrote: > > > > > Hi Pasi, > > > > > > > > > > On Mon, 21 Jun 2010 08:57:55 pm Pasi Kärkkäinen wrote: > > > > > > On Mon, Jun 21, 2010 at 01:56:36PM +0300, Pasi Kärkkäinen wrote: > > > > > > > On Mon, Jun 21, 2010 at 02:28:15PM +1000, Virgil wrote: > > > > > > > > Another quick update > > > > > > > > > > > > > > > > xen-4.0.1-0.1.rc3.fc13.src.rpm just compiled this under fc12. > > > > > > > > > > > > > > > > Identical results with this too (i.e. it's probably in the > > > > > > > > kernel). > > > > > > > > > > > > > > > > I have a (silly) idea for the serial console. The wiki page > > > > > > > > recommends using a phone camera to capture the screen > > > > > > > > > > > > > > > > Well my idea is to add an n-millisecond delay every time the > > > > > > > > output stream in Xen sees a \n. This would delay the screen > > > > > > > > updates enough for the camera to see them. The n should be > > > > > > > > configurable on the kernel boot command line. It's set to 0 > > > > > > > > right now. > > > > > > > > > > > > > > Yeah, we really need to get a log somehow to troubleshoot your > > > > > > > problem. > > > > > > > > > > > > > > Serial console log would be the best: > > > > > > > http://wiki.xensource.com/xenwiki/XenSerialConsole > > > > > > > > > > > > Btw are you running the latest kernel: > > > > > > http://koji.fedoraproject.org/koji/taskinfo?taskID=2254110 > > > > > > > > > > > > Or are you running custom/self compiled kernel? > > > > > > > > > > Everything is working with: > > > > > xen-4.0.1-0.1.rc3 compiled from source on fc12 machine and > > > > > 2.6.32.14-1.2.107.xendom0.fc12.x86_64 from the myoung repo. > > > > > > > > > > All fixed. > > > > > > > > Good to hear it works! > > > > > > > > > We also now have a "null modem" cable to another old computer with > > > > > a COM port. Turns out I was the only old man that could remember > > > > > what a null modem cable is. The young guy said "wtf"? Also turns > > > > > out I'm the only one who knows what minicom is and what 8N1 means > > > > > :-) > > > > > > > >
Re: [Fedora-xen] xen 3.4.3 SRPM / console problem
On Wed, 23 Jun 2010 03:30:52 pm Pasi Kärkkäinen wrote: > On Wed, Jun 23, 2010 at 11:11:58AM +1000, Virgil wrote: > > Hi Pasi, > > > > Had a hiccup overnite: > > > > The host became unresponsive in a weird way. The time stopped > > incrementing. > > > > Turns out the clock stopped ticking (which I put down to the interrupts > > being disconnected). > > > > Anyway I decided I'd reset the time using 'time -s 10:41:30'. > > > > Kaboom, or actually deathly silence. The machine fully stopped dead in > > its tracks. > > > > Just prior to this I connected to the console of one of the 64PV machines > > which was just running a ping from yesterday. Anyway, 60,000 or so lines > > of pings went to the console zipping up the screen. Then it was dead. I > > did a CTRL-C and eventually it returned to the prompt. > > > > So I looked at the other 64PV machine, which was also pining, and > > identical situation. > > > > So I reckon, there's some kind of buffer overflow going on when you're > > not "xm console MACHINE" connected. Once you pass 60,000 lines of text > > this buffer overflow causes the RTC to hangup somehow. > > Do you have xenconsoled running? > > I've noticed PV guests that print a lot to the console will stall if > xenconsoled is not running.. xenconsoled needs to clear the guest console > buffer.. > > -- Pasi Seems to be now. Pretty sure it was then too. udev-post 0:off 1:on2:on3:on4:on5:on6:off wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off xenconsoled 0:off 1:off 2:off 3:on4:on5:on6:off xend0:off 1:off 2:off 3:on4:on5:on6:off xendomains 0:off 1:off 2:off 3:on4:on5:on6:off xenstored 0:off 1:off 2:off 3:on4:on5:on6:off ypbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off [r...@seanl64 ~]# ps -ef | grep xenconso root 1508 1 0 10:19 ?00:00:00 /usr/sbin/xenconsoled --log=none --log-dir=/var/log/xen/console root 7815 7732 0 17:07 pts/500:00:00 grep xenconso Cheers V > > > I pressed the reset button, but this time the 2 64PV machines are not > > logged in. I'll just let it go and see if it keeps going. > > > > Cheers > > V > > > > On Tue, 22 Jun 2010 04:29:06 pm Pasi Kärkkäinen wrote: > > > On Tue, Jun 22, 2010 at 12:03:53PM +1000, Virgil wrote: > > > > Hi Pasi, > > > > > > > > On Mon, 21 Jun 2010 08:57:55 pm Pasi Kärkkäinen wrote: > > > > > On Mon, Jun 21, 2010 at 01:56:36PM +0300, Pasi Kärkkäinen wrote: > > > > > > On Mon, Jun 21, 2010 at 02:28:15PM +1000, Virgil wrote: > > > > > > > Another quick update > > > > > > > > > > > > > > xen-4.0.1-0.1.rc3.fc13.src.rpm just compiled this under fc12. > > > > > > > > > > > > > > Identical results with this too (i.e. it's probably in the > > > > > > > kernel). > > > > > > > > > > > > > > I have a (silly) idea for the serial console. The wiki page > > > > > > > recommends using a phone camera to capture the screen > > > > > > > > > > > > > > Well my idea is to add an n-millisecond delay every time the > > > > > > > output stream in Xen sees a \n. This would delay the screen > > > > > > > updates enough for the camera to see them. The n should be > > > > > > > configurable on the kernel boot command line. It's set to 0 > > > > > > > right now. > > > > > > > > > > > > Yeah, we really need to get a log somehow to troubleshoot your > > > > > > problem. > > > > > > > > > > > > Serial console log would be the best: > > > > > > http://wiki.xensource.com/xenwiki/XenSerialConsole > > > > > > > > > > Btw are you running the latest kernel: > > > > > http://koji.fedoraproject.org/koji/taskinfo?taskID=2254110 > > > > > > > > > > Or are you running custom/self compiled kernel? > > > > > > > > Everything is working with: > > > > xen-4.0.1-0.1.rc3 compiled from source on fc12 machine and > > > > 2.6.32.14-1.2.107.xendom0.fc12.x86_64 from the myoung repo. > > > > > > > > All fixed. > > > > > > Good to hear it works! > > > > > > > We also now have a "null modem" cable to another old computer with a > > > > COM port. Turns out I was the only old man that could remember what > > > > a null modem cable is. The young guy said "wtf"? Also turns out I'm > > > > the only one who knows what minicom is and what 8N1 means :-) > > > > > > Hehe.. yeah I guess young people don't get to play with serial consoles > > > nowadays, until they're doing networking stuff.. > > > > > > So I guess most SOL devices in servers go unused.. :) > > > > > > -- Pasi > > > > > > > All VMs are now running concurrently. > > > > > > > > Very happy again. Thanks. > > > > V > > > > > > > > > -- Pasi > > > > > > > > > > > > Cheers > > > > > > > V > > > > > > > > > > > > > > On Mon, 21 Jun 2010 12:10:17 pm Virgil wrote: > > > > > > > > Just a quick update: > > > > > > > > > > > > > > > > Just tried xen-4.0.0-2. Recompile from source on fc12.x86_64. > > > > > > > > > > > > > > > > ide
Re: [Fedora-xen] xen 3.4.3 SRPM / console problem
On Wed, Jun 23, 2010 at 11:11:58AM +1000, Virgil wrote: > Hi Pasi, > > Had a hiccup overnite: > > The host became unresponsive in a weird way. The time stopped incrementing. > > Turns out the clock stopped ticking (which I put down to the interrupts being > disconnected). > > Anyway I decided I'd reset the time using 'time -s 10:41:30'. > > Kaboom, or actually deathly silence. The machine fully stopped dead in its > tracks. > > Just prior to this I connected to the console of one of the 64PV machines > which was just running a ping from yesterday. Anyway, 60,000 or so lines of > pings went to the console zipping up the screen. Then it was dead. I did a > CTRL-C and eventually it returned to the prompt. > > So I looked at the other 64PV machine, which was also pining, and identical > situation. > > So I reckon, there's some kind of buffer overflow going on when you're not > "xm > console MACHINE" connected. Once you pass 60,000 lines of text this buffer > overflow causes the RTC to hangup somehow. > Do you have xenconsoled running? I've noticed PV guests that print a lot to the console will stall if xenconsoled is not running.. xenconsoled needs to clear the guest console buffer.. -- Pasi > I pressed the reset button, but this time the 2 64PV machines are not logged > in. I'll just let it go and see if it keeps going. > > Cheers > V > > On Tue, 22 Jun 2010 04:29:06 pm Pasi Kärkkäinen wrote: > > On Tue, Jun 22, 2010 at 12:03:53PM +1000, Virgil wrote: > > > Hi Pasi, > > > > > > On Mon, 21 Jun 2010 08:57:55 pm Pasi Kärkkäinen wrote: > > > > On Mon, Jun 21, 2010 at 01:56:36PM +0300, Pasi Kärkkäinen wrote: > > > > > On Mon, Jun 21, 2010 at 02:28:15PM +1000, Virgil wrote: > > > > > > Another quick update > > > > > > > > > > > > xen-4.0.1-0.1.rc3.fc13.src.rpm just compiled this under fc12. > > > > > > > > > > > > Identical results with this too (i.e. it's probably in the kernel). > > > > > > > > > > > > I have a (silly) idea for the serial console. The wiki page > > > > > > recommends using a phone camera to capture the screen > > > > > > > > > > > > Well my idea is to add an n-millisecond delay every time the output > > > > > > stream in Xen sees a \n. This would delay the screen updates enough > > > > > > for the camera to see them. The n should be configurable on the > > > > > > kernel boot command line. It's set to 0 right now. > > > > > > > > > > Yeah, we really need to get a log somehow to troubleshoot your > > > > > problem. > > > > > > > > > > Serial console log would be the best: > > > > > http://wiki.xensource.com/xenwiki/XenSerialConsole > > > > > > > > Btw are you running the latest kernel: > > > > http://koji.fedoraproject.org/koji/taskinfo?taskID=2254110 > > > > > > > > Or are you running custom/self compiled kernel? > > > > > > Everything is working with: > > > xen-4.0.1-0.1.rc3 compiled from source on fc12 machine and > > > 2.6.32.14-1.2.107.xendom0.fc12.x86_64 from the myoung repo. > > > > > > All fixed. > > > > Good to hear it works! > > > > > We also now have a "null modem" cable to another old computer with a COM > > > port. Turns out I was the only old man that could remember what a null > > > modem cable is. The young guy said "wtf"? Also turns out I'm the only > > > one who knows what minicom is and what 8N1 means :-) > > > > Hehe.. yeah I guess young people don't get to play with serial consoles > > nowadays, until they're doing networking stuff.. > > > > So I guess most SOL devices in servers go unused.. :) > > > > -- Pasi > > > > > All VMs are now running concurrently. > > > > > > Very happy again. Thanks. > > > V > > > > > > > -- Pasi > > > > > > > > > > Cheers > > > > > > V > > > > > > > > > > > > On Mon, 21 Jun 2010 12:10:17 pm Virgil wrote: > > > > > > > Just a quick update: > > > > > > > > > > > > > > Just tried xen-4.0.0-2. Recompile from source on fc12.x86_64. > > > > > > > > > > > > > > identical behaviour. > > > > > > > > > > > > > > Cheers > > > > > > > V > > > > > > > > > > > > > > On Fri, 18 Jun 2010 03:17:19 pm Virgil wrote: > > > > > > > > On Sat, 29 May 2010 11:26:50 pm M A Young wrote: > > > > > > > > > If anyone wants to test xen 3.4.3, I have put up a source RPM > > > > > > > > > at > > > > > > > > > http://myoung.fedorapeople.org/dom0/src/xen-3.4.3-0.91.fc13. > > > > > > > > > src.r pm > > > > > > > > > > > > > > > > > > Michael Young > > > > > > > > > > > > > > > > > > -- > > > > > > > > > xen mailing list > > > > > > > > > xen@lists.fedoraproject.org > > > > > > > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > > > > > > > > > > > > > Hi list, > > > > > > > > > > > > > > > > Host crashing on 64FC12 kernel -105 dom0 when 2 PV64 machines > > > > > > > > are run. > > > > > > > > > > > > > > > > I can run HV32WinXP and HV32FC12 and 1 PV64FC12 all at the same > > > > > > > > time. > > > > > > > > > > > > > > > > However, when any combination involves 2 PV64FC12 (kernel > > > > > > >
Re: [Fedora-xen] xen 3.4.3 SRPM
Hi Pasi, Had a hiccup overnite: The host became unresponsive in a weird way. The time stopped incrementing. Turns out the clock stopped ticking (which I put down to the interrupts being disconnected). Anyway I decided I'd reset the time using 'time -s 10:41:30'. Kaboom, or actually deathly silence. The machine fully stopped dead in its tracks. Just prior to this I connected to the console of one of the 64PV machines which was just running a ping from yesterday. Anyway, 60,000 or so lines of pings went to the console zipping up the screen. Then it was dead. I did a CTRL-C and eventually it returned to the prompt. So I looked at the other 64PV machine, which was also pining, and identical situation. So I reckon, there's some kind of buffer overflow going on when you're not "xm console MACHINE" connected. Once you pass 60,000 lines of text this buffer overflow causes the RTC to hangup somehow. I pressed the reset button, but this time the 2 64PV machines are not logged in. I'll just let it go and see if it keeps going. Cheers V On Tue, 22 Jun 2010 04:29:06 pm Pasi Kärkkäinen wrote: > On Tue, Jun 22, 2010 at 12:03:53PM +1000, Virgil wrote: > > Hi Pasi, > > > > On Mon, 21 Jun 2010 08:57:55 pm Pasi Kärkkäinen wrote: > > > On Mon, Jun 21, 2010 at 01:56:36PM +0300, Pasi Kärkkäinen wrote: > > > > On Mon, Jun 21, 2010 at 02:28:15PM +1000, Virgil wrote: > > > > > Another quick update > > > > > > > > > > xen-4.0.1-0.1.rc3.fc13.src.rpm just compiled this under fc12. > > > > > > > > > > Identical results with this too (i.e. it's probably in the kernel). > > > > > > > > > > I have a (silly) idea for the serial console. The wiki page > > > > > recommends using a phone camera to capture the screen > > > > > > > > > > Well my idea is to add an n-millisecond delay every time the output > > > > > stream in Xen sees a \n. This would delay the screen updates enough > > > > > for the camera to see them. The n should be configurable on the > > > > > kernel boot command line. It's set to 0 right now. > > > > > > > > Yeah, we really need to get a log somehow to troubleshoot your > > > > problem. > > > > > > > > Serial console log would be the best: > > > > http://wiki.xensource.com/xenwiki/XenSerialConsole > > > > > > Btw are you running the latest kernel: > > > http://koji.fedoraproject.org/koji/taskinfo?taskID=2254110 > > > > > > Or are you running custom/self compiled kernel? > > > > Everything is working with: > > xen-4.0.1-0.1.rc3 compiled from source on fc12 machine and > > 2.6.32.14-1.2.107.xendom0.fc12.x86_64 from the myoung repo. > > > > All fixed. > > Good to hear it works! > > > We also now have a "null modem" cable to another old computer with a COM > > port. Turns out I was the only old man that could remember what a null > > modem cable is. The young guy said "wtf"? Also turns out I'm the only > > one who knows what minicom is and what 8N1 means :-) > > Hehe.. yeah I guess young people don't get to play with serial consoles > nowadays, until they're doing networking stuff.. > > So I guess most SOL devices in servers go unused.. :) > > -- Pasi > > > All VMs are now running concurrently. > > > > Very happy again. Thanks. > > V > > > > > -- Pasi > > > > > > > > Cheers > > > > > V > > > > > > > > > > On Mon, 21 Jun 2010 12:10:17 pm Virgil wrote: > > > > > > Just a quick update: > > > > > > > > > > > > Just tried xen-4.0.0-2. Recompile from source on fc12.x86_64. > > > > > > > > > > > > identical behaviour. > > > > > > > > > > > > Cheers > > > > > > V > > > > > > > > > > > > On Fri, 18 Jun 2010 03:17:19 pm Virgil wrote: > > > > > > > On Sat, 29 May 2010 11:26:50 pm M A Young wrote: > > > > > > > > If anyone wants to test xen 3.4.3, I have put up a source RPM > > > > > > > > at > > > > > > > > http://myoung.fedorapeople.org/dom0/src/xen-3.4.3-0.91.fc13. > > > > > > > > src.r pm > > > > > > > > > > > > > > > > Michael Young > > > > > > > > > > > > > > > > -- > > > > > > > > xen mailing list > > > > > > > > xen@lists.fedoraproject.org > > > > > > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > > > > > > > > > > > Hi list, > > > > > > > > > > > > > > Host crashing on 64FC12 kernel -105 dom0 when 2 PV64 machines > > > > > > > are run. > > > > > > > > > > > > > > I can run HV32WinXP and HV32FC12 and 1 PV64FC12 all at the same > > > > > > > time. > > > > > > > > > > > > > > However, when any combination involves 2 PV64FC12 (kernel > > > > > > > version doesn't matter) the host crashes. > > > > > > > > > > > > > > Running on the -97 dom0 everything works in all combos. > > > > > > > > > > > > > > Using Xen 3.4.3. > > > > > > > > > > > > > > Turning off the virt network cards in the PV64FC12 machines > > > > > > > makes things go (obviously not much use though). > > > > > > > > > > > > > > Tried disabling IPV6, firewall stuff etc. etc. > > > > > > > > > > > > > > Sometimes it would fire up and go but whichever machine is > > > > > > > started
Re: [Fedora-xen] xen 3.4.3 SRPM
On Tue, Jun 22, 2010 at 12:03:53PM +1000, Virgil wrote: > Hi Pasi, > > On Mon, 21 Jun 2010 08:57:55 pm Pasi Kärkkäinen wrote: > > On Mon, Jun 21, 2010 at 01:56:36PM +0300, Pasi Kärkkäinen wrote: > > > On Mon, Jun 21, 2010 at 02:28:15PM +1000, Virgil wrote: > > > > Another quick update > > > > > > > > xen-4.0.1-0.1.rc3.fc13.src.rpm just compiled this under fc12. > > > > > > > > Identical results with this too (i.e. it's probably in the kernel). > > > > > > > > I have a (silly) idea for the serial console. The wiki page recommends > > > > using a phone camera to capture the screen > > > > > > > > Well my idea is to add an n-millisecond delay every time the output > > > > stream in Xen sees a \n. This would delay the screen updates enough > > > > for the camera to see them. The n should be configurable on the kernel > > > > boot command line. It's set to 0 right now. > > > > > > Yeah, we really need to get a log somehow to troubleshoot your problem. > > > > > > Serial console log would be the best: > > > http://wiki.xensource.com/xenwiki/XenSerialConsole > > > > Btw are you running the latest kernel: > > http://koji.fedoraproject.org/koji/taskinfo?taskID=2254110 > > > > Or are you running custom/self compiled kernel? > > > > Everything is working with: > xen-4.0.1-0.1.rc3 compiled from source on fc12 machine and > 2.6.32.14-1.2.107.xendom0.fc12.x86_64 from the myoung repo. > > All fixed. > Good to hear it works! > We also now have a "null modem" cable to another old computer with a COM > port. > Turns out I was the only old man that could remember what a null modem cable > is. The young guy said "wtf"? Also turns out I'm the only one who knows what > minicom is and what 8N1 means :-) > Hehe.. yeah I guess young people don't get to play with serial consoles nowadays, until they're doing networking stuff.. So I guess most SOL devices in servers go unused.. :) -- Pasi > All VMs are now running concurrently. > > Very happy again. Thanks. > V > > > -- Pasi > > > > > > Cheers > > > > V > > > > > > > > On Mon, 21 Jun 2010 12:10:17 pm Virgil wrote: > > > > > Just a quick update: > > > > > > > > > > Just tried xen-4.0.0-2. Recompile from source on fc12.x86_64. > > > > > > > > > > identical behaviour. > > > > > > > > > > Cheers > > > > > V > > > > > > > > > > On Fri, 18 Jun 2010 03:17:19 pm Virgil wrote: > > > > > > On Sat, 29 May 2010 11:26:50 pm M A Young wrote: > > > > > > > If anyone wants to test xen 3.4.3, I have put up a source RPM at > > > > > > > http://myoung.fedorapeople.org/dom0/src/xen-3.4.3-0.91.fc13.src.r > > > > > > > pm > > > > > > > > > > > > > > Michael Young > > > > > > > > > > > > > > -- > > > > > > > xen mailing list > > > > > > > xen@lists.fedoraproject.org > > > > > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > > > > > > > > > Hi list, > > > > > > > > > > > > Host crashing on 64FC12 kernel -105 dom0 when 2 PV64 machines are > > > > > > run. > > > > > > > > > > > > I can run HV32WinXP and HV32FC12 and 1 PV64FC12 all at the same > > > > > > time. > > > > > > > > > > > > However, when any combination involves 2 PV64FC12 (kernel version > > > > > > doesn't matter) the host crashes. > > > > > > > > > > > > Running on the -97 dom0 everything works in all combos. > > > > > > > > > > > > Using Xen 3.4.3. > > > > > > > > > > > > Turning off the virt network cards in the PV64FC12 machines makes > > > > > > things go (obviously not much use though). > > > > > > > > > > > > Tried disabling IPV6, firewall stuff etc. etc. > > > > > > > > > > > > Sometimes it would fire up and go but whichever machine is started > > > > > > second gets really long ping times like it's not receiving unless > > > > > > it sends something (if that makes sense). Sooner or later the host > > > > > > crashes. > > > > > > > > > > > > Strangely a PV64FC12 and a PV64FC10 machine coexist happily. It's > > > > > > only when a second PV64FC12 machine starts up. > > > > > > > > > > > > V > > > > > > -- > > > > > > xen mailing list > > > > > > xen@lists.fedoraproject.org > > > > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > > > > > > > -- > > > > > xen mailing list > > > > > xen@lists.fedoraproject.org > > > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > > > > > -- > > > > xen mailing list > > > > xen@lists.fedoraproject.org > > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > > > -- > > > xen mailing list > > > xen@lists.fedoraproject.org > > > https://admin.fedoraproject.org/mailman/listinfo/xen -- xen mailing list xen@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/xen
Re: [Fedora-xen] xen 3.4.3 SRPM
Hi Pasi, On Mon, 21 Jun 2010 08:57:55 pm Pasi Kärkkäinen wrote: > On Mon, Jun 21, 2010 at 01:56:36PM +0300, Pasi Kärkkäinen wrote: > > On Mon, Jun 21, 2010 at 02:28:15PM +1000, Virgil wrote: > > > Another quick update > > > > > > xen-4.0.1-0.1.rc3.fc13.src.rpm just compiled this under fc12. > > > > > > Identical results with this too (i.e. it's probably in the kernel). > > > > > > I have a (silly) idea for the serial console. The wiki page recommends > > > using a phone camera to capture the screen > > > > > > Well my idea is to add an n-millisecond delay every time the output > > > stream in Xen sees a \n. This would delay the screen updates enough > > > for the camera to see them. The n should be configurable on the kernel > > > boot command line. It's set to 0 right now. > > > > Yeah, we really need to get a log somehow to troubleshoot your problem. > > > > Serial console log would be the best: > > http://wiki.xensource.com/xenwiki/XenSerialConsole > > Btw are you running the latest kernel: > http://koji.fedoraproject.org/koji/taskinfo?taskID=2254110 > > Or are you running custom/self compiled kernel? > Everything is working with: xen-4.0.1-0.1.rc3 compiled from source on fc12 machine and 2.6.32.14-1.2.107.xendom0.fc12.x86_64 from the myoung repo. All fixed. We also now have a "null modem" cable to another old computer with a COM port. Turns out I was the only old man that could remember what a null modem cable is. The young guy said "wtf"? Also turns out I'm the only one who knows what minicom is and what 8N1 means :-) All VMs are now running concurrently. Very happy again. Thanks. V > -- Pasi > > > > Cheers > > > V > > > > > > On Mon, 21 Jun 2010 12:10:17 pm Virgil wrote: > > > > Just a quick update: > > > > > > > > Just tried xen-4.0.0-2. Recompile from source on fc12.x86_64. > > > > > > > > identical behaviour. > > > > > > > > Cheers > > > > V > > > > > > > > On Fri, 18 Jun 2010 03:17:19 pm Virgil wrote: > > > > > On Sat, 29 May 2010 11:26:50 pm M A Young wrote: > > > > > > If anyone wants to test xen 3.4.3, I have put up a source RPM at > > > > > > http://myoung.fedorapeople.org/dom0/src/xen-3.4.3-0.91.fc13.src.r > > > > > > pm > > > > > > > > > > > > Michael Young > > > > > > > > > > > > -- > > > > > > xen mailing list > > > > > > xen@lists.fedoraproject.org > > > > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > > > > > > > Hi list, > > > > > > > > > > Host crashing on 64FC12 kernel -105 dom0 when 2 PV64 machines are > > > > > run. > > > > > > > > > > I can run HV32WinXP and HV32FC12 and 1 PV64FC12 all at the same > > > > > time. > > > > > > > > > > However, when any combination involves 2 PV64FC12 (kernel version > > > > > doesn't matter) the host crashes. > > > > > > > > > > Running on the -97 dom0 everything works in all combos. > > > > > > > > > > Using Xen 3.4.3. > > > > > > > > > > Turning off the virt network cards in the PV64FC12 machines makes > > > > > things go (obviously not much use though). > > > > > > > > > > Tried disabling IPV6, firewall stuff etc. etc. > > > > > > > > > > Sometimes it would fire up and go but whichever machine is started > > > > > second gets really long ping times like it's not receiving unless > > > > > it sends something (if that makes sense). Sooner or later the host > > > > > crashes. > > > > > > > > > > Strangely a PV64FC12 and a PV64FC10 machine coexist happily. It's > > > > > only when a second PV64FC12 machine starts up. > > > > > > > > > > V > > > > > -- > > > > > xen mailing list > > > > > xen@lists.fedoraproject.org > > > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > > > > > -- > > > > xen mailing list > > > > xen@lists.fedoraproject.org > > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > > > -- > > > xen mailing list > > > xen@lists.fedoraproject.org > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > -- > > xen mailing list > > xen@lists.fedoraproject.org > > https://admin.fedoraproject.org/mailman/listinfo/xen -- xen mailing list xen@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/xen
Re: [Fedora-xen] xen 3.4.3 SRPM
On Mon, Jun 21, 2010 at 01:56:36PM +0300, Pasi Kärkkäinen wrote: > On Mon, Jun 21, 2010 at 02:28:15PM +1000, Virgil wrote: > > Another quick update > > > > xen-4.0.1-0.1.rc3.fc13.src.rpm just compiled this under fc12. > > > > Identical results with this too (i.e. it's probably in the kernel). > > > > I have a (silly) idea for the serial console. The wiki page recommends > > using a > > phone camera to capture the screen > > > > Well my idea is to add an n-millisecond delay every time the output stream > > in > > Xen sees a \n. This would delay the screen updates enough for the camera to > > see them. The n should be configurable on the kernel boot command line. > > It's > > set to 0 right now. > > > > Yeah, we really need to get a log somehow to troubleshoot your problem. > > Serial console log would be the best: > http://wiki.xensource.com/xenwiki/XenSerialConsole > Btw are you running the latest kernel: http://koji.fedoraproject.org/koji/taskinfo?taskID=2254110 Or are you running custom/self compiled kernel? -- Pasi > > > Cheers > > V > > > > On Mon, 21 Jun 2010 12:10:17 pm Virgil wrote: > > > Just a quick update: > > > > > > Just tried xen-4.0.0-2. Recompile from source on fc12.x86_64. > > > > > > identical behaviour. > > > > > > Cheers > > > V > > > > > > On Fri, 18 Jun 2010 03:17:19 pm Virgil wrote: > > > > On Sat, 29 May 2010 11:26:50 pm M A Young wrote: > > > > > If anyone wants to test xen 3.4.3, I have put up a source RPM at > > > > > http://myoung.fedorapeople.org/dom0/src/xen-3.4.3-0.91.fc13.src.rpm > > > > > > > > > > Michael Young > > > > > > > > > > -- > > > > > xen mailing list > > > > > xen@lists.fedoraproject.org > > > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > > > > > Hi list, > > > > > > > > Host crashing on 64FC12 kernel -105 dom0 when 2 PV64 machines are run. > > > > > > > > I can run HV32WinXP and HV32FC12 and 1 PV64FC12 all at the same time. > > > > > > > > However, when any combination involves 2 PV64FC12 (kernel version > > > > doesn't > > > > matter) the host crashes. > > > > > > > > Running on the -97 dom0 everything works in all combos. > > > > > > > > Using Xen 3.4.3. > > > > > > > > Turning off the virt network cards in the PV64FC12 machines makes things > > > > go (obviously not much use though). > > > > > > > > Tried disabling IPV6, firewall stuff etc. etc. > > > > > > > > Sometimes it would fire up and go but whichever machine is started > > > > second > > > > gets really long ping times like it's not receiving unless it sends > > > > something (if that makes sense). Sooner or later the host crashes. > > > > > > > > Strangely a PV64FC12 and a PV64FC10 machine coexist happily. It's only > > > > when a second PV64FC12 machine starts up. > > > > > > > > V > > > > -- > > > > xen mailing list > > > > xen@lists.fedoraproject.org > > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > > > -- > > > xen mailing list > > > xen@lists.fedoraproject.org > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > -- > > xen mailing list > > xen@lists.fedoraproject.org > > https://admin.fedoraproject.org/mailman/listinfo/xen > -- > xen mailing list > xen@lists.fedoraproject.org > https://admin.fedoraproject.org/mailman/listinfo/xen -- xen mailing list xen@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/xen
Re: [Fedora-xen] xen 3.4.3 SRPM
On Mon, Jun 21, 2010 at 02:28:15PM +1000, Virgil wrote: > Another quick update > > xen-4.0.1-0.1.rc3.fc13.src.rpm just compiled this under fc12. > > Identical results with this too (i.e. it's probably in the kernel). > > I have a (silly) idea for the serial console. The wiki page recommends using > a > phone camera to capture the screen > > Well my idea is to add an n-millisecond delay every time the output stream in > Xen sees a \n. This would delay the screen updates enough for the camera to > see them. The n should be configurable on the kernel boot command line. It's > set to 0 right now. > Yeah, we really need to get a log somehow to troubleshoot your problem. Serial console log would be the best: http://wiki.xensource.com/xenwiki/XenSerialConsole -- Pasi > Cheers > V > > On Mon, 21 Jun 2010 12:10:17 pm Virgil wrote: > > Just a quick update: > > > > Just tried xen-4.0.0-2. Recompile from source on fc12.x86_64. > > > > identical behaviour. > > > > Cheers > > V > > > > On Fri, 18 Jun 2010 03:17:19 pm Virgil wrote: > > > On Sat, 29 May 2010 11:26:50 pm M A Young wrote: > > > > If anyone wants to test xen 3.4.3, I have put up a source RPM at > > > > http://myoung.fedorapeople.org/dom0/src/xen-3.4.3-0.91.fc13.src.rpm > > > > > > > > Michael Young > > > > > > > > -- > > > > xen mailing list > > > > xen@lists.fedoraproject.org > > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > > > Hi list, > > > > > > Host crashing on 64FC12 kernel -105 dom0 when 2 PV64 machines are run. > > > > > > I can run HV32WinXP and HV32FC12 and 1 PV64FC12 all at the same time. > > > > > > However, when any combination involves 2 PV64FC12 (kernel version doesn't > > > matter) the host crashes. > > > > > > Running on the -97 dom0 everything works in all combos. > > > > > > Using Xen 3.4.3. > > > > > > Turning off the virt network cards in the PV64FC12 machines makes things > > > go (obviously not much use though). > > > > > > Tried disabling IPV6, firewall stuff etc. etc. > > > > > > Sometimes it would fire up and go but whichever machine is started second > > > gets really long ping times like it's not receiving unless it sends > > > something (if that makes sense). Sooner or later the host crashes. > > > > > > Strangely a PV64FC12 and a PV64FC10 machine coexist happily. It's only > > > when a second PV64FC12 machine starts up. > > > > > > V > > > -- > > > xen mailing list > > > xen@lists.fedoraproject.org > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > -- > > xen mailing list > > xen@lists.fedoraproject.org > > https://admin.fedoraproject.org/mailman/listinfo/xen > -- > xen mailing list > xen@lists.fedoraproject.org > https://admin.fedoraproject.org/mailman/listinfo/xen -- xen mailing list xen@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/xen
Re: [Fedora-xen] xen 3.4.3 SRPM
Another quick update xen-4.0.1-0.1.rc3.fc13.src.rpm just compiled this under fc12. Identical results with this too (i.e. it's probably in the kernel). I have a (silly) idea for the serial console. The wiki page recommends using a phone camera to capture the screen Well my idea is to add an n-millisecond delay every time the output stream in Xen sees a \n. This would delay the screen updates enough for the camera to see them. The n should be configurable on the kernel boot command line. It's set to 0 right now. Cheers V On Mon, 21 Jun 2010 12:10:17 pm Virgil wrote: > Just a quick update: > > Just tried xen-4.0.0-2. Recompile from source on fc12.x86_64. > > identical behaviour. > > Cheers > V > > On Fri, 18 Jun 2010 03:17:19 pm Virgil wrote: > > On Sat, 29 May 2010 11:26:50 pm M A Young wrote: > > > If anyone wants to test xen 3.4.3, I have put up a source RPM at > > > http://myoung.fedorapeople.org/dom0/src/xen-3.4.3-0.91.fc13.src.rpm > > > > > > Michael Young > > > > > > -- > > > xen mailing list > > > xen@lists.fedoraproject.org > > > https://admin.fedoraproject.org/mailman/listinfo/xen > > > > Hi list, > > > > Host crashing on 64FC12 kernel -105 dom0 when 2 PV64 machines are run. > > > > I can run HV32WinXP and HV32FC12 and 1 PV64FC12 all at the same time. > > > > However, when any combination involves 2 PV64FC12 (kernel version doesn't > > matter) the host crashes. > > > > Running on the -97 dom0 everything works in all combos. > > > > Using Xen 3.4.3. > > > > Turning off the virt network cards in the PV64FC12 machines makes things > > go (obviously not much use though). > > > > Tried disabling IPV6, firewall stuff etc. etc. > > > > Sometimes it would fire up and go but whichever machine is started second > > gets really long ping times like it's not receiving unless it sends > > something (if that makes sense). Sooner or later the host crashes. > > > > Strangely a PV64FC12 and a PV64FC10 machine coexist happily. It's only > > when a second PV64FC12 machine starts up. > > > > V > > -- > > xen mailing list > > xen@lists.fedoraproject.org > > https://admin.fedoraproject.org/mailman/listinfo/xen > > -- > xen mailing list > xen@lists.fedoraproject.org > https://admin.fedoraproject.org/mailman/listinfo/xen -- xen mailing list xen@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/xen
Re: [Fedora-xen] xen 3.4.3 SRPM
Just a quick update: Just tried xen-4.0.0-2. Recompile from source on fc12.x86_64. identical behaviour. Cheers V On Fri, 18 Jun 2010 03:17:19 pm Virgil wrote: > On Sat, 29 May 2010 11:26:50 pm M A Young wrote: > > If anyone wants to test xen 3.4.3, I have put up a source RPM at > > http://myoung.fedorapeople.org/dom0/src/xen-3.4.3-0.91.fc13.src.rpm > > > > Michael Young > > > > -- > > xen mailing list > > xen@lists.fedoraproject.org > > https://admin.fedoraproject.org/mailman/listinfo/xen > > Hi list, > > Host crashing on 64FC12 kernel -105 dom0 when 2 PV64 machines are run. > > I can run HV32WinXP and HV32FC12 and 1 PV64FC12 all at the same time. > > However, when any combination involves 2 PV64FC12 (kernel version doesn't > matter) the host crashes. > > Running on the -97 dom0 everything works in all combos. > > Using Xen 3.4.3. > > Turning off the virt network cards in the PV64FC12 machines makes things go > (obviously not much use though). > > Tried disabling IPV6, firewall stuff etc. etc. > > Sometimes it would fire up and go but whichever machine is started second > gets really long ping times like it's not receiving unless it sends > something (if that makes sense). Sooner or later the host crashes. > > Strangely a PV64FC12 and a PV64FC10 machine coexist happily. It's only when > a second PV64FC12 machine starts up. > > V > -- > xen mailing list > xen@lists.fedoraproject.org > https://admin.fedoraproject.org/mailman/listinfo/xen -- xen mailing list xen@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/xen
Re: [Fedora-xen] xen 3.4.3 SRPM
On Sat, 29 May 2010 11:26:50 pm M A Young wrote: > If anyone wants to test xen 3.4.3, I have put up a source RPM at > http://myoung.fedorapeople.org/dom0/src/xen-3.4.3-0.91.fc13.src.rpm > > Michael Young > > -- > xen mailing list > xen@lists.fedoraproject.org > https://admin.fedoraproject.org/mailman/listinfo/xen Hi list, Host crashing on 64FC12 kernel -105 dom0 when 2 PV64 machines are run. I can run HV32WinXP and HV32FC12 and 1 PV64FC12 all at the same time. However, when any combination involves 2 PV64FC12 (kernel version doesn't matter) the host crashes. Running on the -97 dom0 everything works in all combos. Using Xen 3.4.3. Turning off the virt network cards in the PV64FC12 machines makes things go (obviously not much use though). Tried disabling IPV6, firewall stuff etc. etc. Sometimes it would fire up and go but whichever machine is started second gets really long ping times like it's not receiving unless it sends something (if that makes sense). Sooner or later the host crashes. Strangely a PV64FC12 and a PV64FC10 machine coexist happily. It's only when a second PV64FC12 machine starts up. V -- xen mailing list xen@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/xen
