Do you Need someone to talk to
meeting a companion in 2005 W1LL K1LL Y0U! more Q-U-!-T elizabethan carrotditzel waterline bevelseagull boxcar cowpokegrosset thoriate emphasesjudd fraction glosssunlit twig basilaramarillo auschwitz adoptfloc perfidious fieldathabascan pulaski deignflautist ambrose addisonductile magic bindweedbead acknowledge dauphinebright
DJ MIXTAPE: THE MOVIE
Urban Home Cinema Presents: The mixtape DVD, the story behind the mixtapes which made DJ Clue, Funkmaster flex DJ Whoo Kid Gees. The movie gives you an insight how and why mixtapes are made and who benefits from it's profits and what the big wigs in the music industry think about it. Don't miss this one. freshly released http://www.2gees.co.uk/catalog.php?category=%20DVD ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
basement, the trees in
Hello, Resently we sent you an email about mor t g age r at e going up, just from last week that ra t es went up by 2 point. Its not to late to lock your mor tg age. You can qualifiy to get a 400, 000 at 400 a month. But please act fast as the ra tes will not stay low for much longer. http://www.trnnet.com/ Thank you, Best regards, Gagnon ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
feeling well
Hi, We heard you would be curious about a massive discount on your rx meds purchase directly from our FDA-approved manufacturers. Lower overhead allows us to provide quality drugs at lower than regular prices. No prescription required, point, click and order! Goto: http://corporationfor.com/?a=552 in your web browser to learn more Good-bye, Clara Mcknight ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
[Fonts] DJ MIXTAPE: THE MOVIE
Urban Home Cinema Presents: The mixtape DVD, the story behind the mixtapes which made DJ Clue, Funkmaster flex DJ Whoo Kid Gees. The movie gives you an insight how and why mixtapes are made and who benefits from it's profits and what the big wigs in the music industry think about it. Don't miss this one. freshly released http://www.2gees.co.uk/catalog.php?category=%20DVD ___ Fonts mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/fonts
[Fonts] You were Pre-Selected for Lower Mrtgage Rate On: Mon, 11/8/04
You have been Pre-Selected on Mon, 11/8/04 for a Lower Mrtgage Rate! We need your immediate attention on this matter! You will be matched up with 3 Lenders Since time is sensitive, please fill out following information below... One-Low Mrtgage Rate
[I18n] Oakley Replicas
Do you want Watch? http://mfg.swlss.com/r/sales/ ___ I18n mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/i18n
[I18n] DJ MIXTAPE: THE MOVIE
Urban Home Cinema Presents: The mixtape DVD, the story behind the mixtapes which made DJ Clue, Funkmaster flex DJ Whoo Kid Gees. The movie gives you an insight how and why mixtapes are made and who benefits from it's profits and what the big wigs in the music industry think about it. Don't miss this one. freshly released http://www.2gees.co.uk/catalog.php?category=%20DVD ___ I18n mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/i18n
[XFree86] Delivery Status Notification
- These recipients of your message have been processed by the mail server: [EMAIL PROTECTED]; Failed; 5.2.2 (mailbox full) Reporting-MTA: dns; mail1a.webmessenger.it Received-from-MTA: dns; arci.it (151.24.166.69) Arrival-Date: Wed, 17 Nov 2004 10:05:33 +0100 Final-Recipient: rfc822; [EMAIL PROTECTED] Action: Failed Status: 5.2.2 (mailbox full) Return-Path: [EMAIL PROTECTED] Received: from arci.it (151.24.166.69) by mail1a.webmessenger.it (7.0.027-DD01) id 40FD00B70119C61C for [EMAIL PROTECTED]; Wed, 17 Nov 2004 10:05:33 +0100 Message-ID: [EMAIL PROTECTED] (added by [EMAIL PROTECTED]) From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: word document Date: Wed, 17 Nov 2004 10:04:25 +0100 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary==_NextPart_000_0016=_NextPart_000_0016 X-Priority: 3 X-MSMail-Priority: Normal
[XFree86] ATI Mobility Radeon 7000 (notebook) not recognized - not supported??
Hello, Could it be that XFree86 doesn't (yet?) support the ATI Mobility Radeon 7000 graphic adapter (notebook)? Background: Trying to install XFree86/2 (for OS/2) version 4.4 on my notebook, I do a xfree86 -configure in order to get the hardware checked automatically. What happens is just nothing, i.e.: the program neither crashes nor stops and I have to terminate it the hard way. The log file it should generate is there, but empty. My hardware is an IBM Thinkpad R32, and IBM specifies the graphic adapter as follows: ATI Mobility Radeon 7000, AGB 4x, 16MB DDR-SDRAM, 66 MHz bus On the ATI webpage I find the following graphic chip, which might (or might not??) be the same: ATI Mobility Radeon 7000 IGP (note the IGP suffix) A PCI bus scan of my system delivers the following complete output: http://www.os2warp.be/notebook2/ibm/r32pci.txt the essence being: Radeon Mobility M6 LY (i.e.: still another set of suffixes) Finally the radeon driver docs for XFree86 reports as supported: Radeon Mobility 7000 IGP So what I see is: - there are similar, but still different designations around - it doesn't seem to work on my system currently The other (and always quite probable!) thing could be user error - but which? Greetings and thanks for any help! (Maybe there's a R32 user around with an XFree86 server of any kind running??) Cornelis Bockemühl ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] How to change screen resolution
Dear Friends,I am unable to change mine screen resolution to 1024*468 i have tried using redhat-config-xfree86 and editing /etc/X11/XF86Config .One of mine friend asked for 'dmesg' report. I do not know much about it but i am sending you this. Perhaps this might help u helping me. Please help me. I shall be very grateful. Thanks in advance for your time and effort. --Regards,Abhishek jain Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 0980 (usable) BIOS-e820: - 0001 (reserved) 0MB HIGHMEM available. 152MB LOWMEM available. On node 0 totalpages: 38912 zone(0): 4096 pages. zone(1): 34816 pages. zone(2): 0 pages. Kernel command line: ro root=LABEL=/ hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 551.256 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1101.00 BogoMIPS Memory: 148860k/155648k available (1347k kernel code, 5184k reserved, 999k data, 132k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU serial number disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff CPU: Common caps: 0383f9ff CPU: Intel Pentium III (Katmai) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb480, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router SIS [1039/0008] at 00:01.0 isapnp: Scanning for PnP cards... isapnp: No Plug Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 00:00.1 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SiS620 ATA 66 controller ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:DMA spurious 8259A interrupt: IRQ15. hda: ST310212A, ATA DISK drive hdb: ST340014A, ATA DISK drive blk: queue c03c9f40, I/O limit 4095Mb (mask 0x) blk: queue c03ca084, I/O limit 4095Mb (mask 0x) hdd: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area = 1 hda: 20005650 sectors (10243 MB) w/512KiB Cache, CHS=1245/255/63, UDMA(66) hdb: host protected area = 1 hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(66) ide-floppy driver 0.99.newide Partition check: hda: hda1 hdb: hdb1 hdb2 hdb5 hdb6 hdb7 hdb8 ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 83k freed VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 132k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xca029000, IRQ 9 usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 5 for device 00:0b.0 PCI: Sharing IRQ
[XFree86] DJ MIXTAPE: THE MOVIE
Urban Home Cinema Presents: The mixtape DVD, the story behind the mixtapes which made DJ Clue, Funkmaster flex DJ Whoo Kid Gees. The movie gives you an insight how and why mixtapes are made and who benefits from it's profits and what the big wigs in the music industry think about it. Don't miss this one. freshly released http://www.2gees.co.uk/catalog.php?category=%20DVD ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] GeForce 5900 ultra
Greetings sirs I have installed version 7.2 of Linux RedHat as a workstation on a PC. I tried to run Xconfigurator to configure my Graphics Card (GeForce 5900 Ultra) which is not listed as a supported card, but I could not work out my problem. I couldn't configure the right settings of the card. I have sent the following logs in case they are helpful. XF86Config-4 XFree86.0.log XFree86Version.txt (this is the output of XFree86 -version) I also tried to modify XF86Config file but it didn't work. Can you tell me the right settings for this device? Thank you! Yours Sincerely Bassam Lababidi XF86Config-4 --- # XFree86 4.0 configuration generated by Xconfigurator Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection # By default, Red Hat Linux 6.0 and later use xfs Section "Files" FontPath "unix/:7100" EndSection # Module loading section Section "Module" Load "dbe" # Double-buffering Load "GLcore" # OpenGL support Load "dri" # Direct rendering infrastructure Load "glx" # OpenGL X protocol interface Load "extmod" # Misc. required extensions Load "v4l" # Video4Linux # Load "pex5" # PHIGS for X 3D environment (obsolete) # Load "record" # X event recorder # Load "xie" # X Image Extension (obsolete) # You only need the following two modules if you do not use xfs. # Load "freetype" # TrueType font handler # Load "type1" # Adobe Type 1 font handler EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "IMPS/2" Option "Emulate3Buttons" "off" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "NEC E750" VendorName "Unknown" ModelName "Unknown" HorizSync 31 - 92 VertRefresh 55 - 160 Option "dpms" EndSection Section "Device" Identifier "NVIDIA GeForce DDR (generic)" Driver "nv" BoardName "Unknown" EndSection Section "Device" Identifier "Linux Frame Buffer" Driver "fbdev" BoardName "Unknown" EndSection Section "Screen" Identifier "Screen0" Device "NVIDIA GeForce DDR (generic)" Monitor "NEC E750" DefaultDepth 16 Subsection "Display" Depth 24 Modes "640x480" EndSubSection Subsection "Display" Depth 16 Modes "640x480" EndSubSection Subsection "Display" Depth 8 Modes "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection --- XFree86 Version --- XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] Build Host: stripples.devel.redhat.com Module Loader present --- --- XFree86.0.log --- XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] Build Host: stripples.devel.redhat.com Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Wed Nov 17 20:14:07 2004 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "XFree86 Configured" (**) |--Screen "Screen0" (0) (**) | |--Monitor "NEC E750" (**) | |--Device "NVIDIA GeForce DDR (generic)" (**) |--Input Device "Mouse0" (**) |--Input Device "Keyboard0" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0, module
Re: [XFree86] ATI Mobility Radeon 7000 (notebook) not recognized - not supported??
Cornelis Bockemuehl wrote: My hardware is an IBM Thinkpad R32, and IBM specifies the graphic adapter as follows: ATI Mobility Radeon 7000, AGB 4x, 16MB DDR-SDRAM, 66 MHz bus On the ATI webpage I find the following graphic chip, which might (or might not??) be the same: ATI Mobility Radeon 7000 IGP (note the IGP suffix) A PCI bus scan of my system delivers the following complete output: http://www.os2warp.be/notebook2/ibm/r32pci.txt the essence being: Radeon Mobility M6 LY Here's the scoop. Any ATI chipset that is an IGP, and there are several, is a chipset where the graphics chips is integrated into the motherboard's memory controler. IGP is an acronym for Integrated Graphics some word that starts with P. The regular mobility chips are stand-alone graphics chips that usually have memory either itegrated on the chip or stacked on the chip's case. Look at the picture of the Radeon Mobility M9 here: http://www.idhw.com/textual/chip/ati/chippicture.html The chip in your laptop is the stand-alone Radeon Mobility M6. The LY part is just the ASCII translation of the hex digits 0x4c 0x59. This is done because ATI likes to make lots of chips in the same model with different PCI IDs. For the M6, there are two PCI IDs around: 4c59 and 4c5a. The former is called LY and the later is called LZ. There are 16 different versions of the chip used in the Radeon 8500 cards! Usually the different PCI ID doesn't mean anything, so I wouldn't worry about that. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] GeForce 5900 ultra
Your XFree86 version is about 3.5 years old. The nv driver that ships with it doesn't support that card because it hadn't come out yet at that time and wouldn't for a couple years yet. You either need to upgrade to a newer XFree86 version (at least 4.3.0) or use the Linux drivers available from NVIDIA's web site, which should work with your current XFree86 version. Mark. On Wed, 17 Nov 2004, Bassam wrote: Greetings sirs I have installed version 7.2 of Linux RedHat as a workstation on a PC. I tried to run Xconfigurator to configure my Graphics Card (GeForce 5900 Ultra) which is not listed as a supported card, but I could not work out my problem. I couldn't configure the right settings of the card. I have sent the following logs in case they are helpful. XF86Config-4 XFree86.0.log XFree86Version.txt (this is the output of XFree86 -version) I also tried to modify XF86Config file but it didn't work. Can you tell me the right settings for this driver? Thank you! Yours Sincerely Bassam Lababidi ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] How to change screen resolution
You need to send the /var/log/XFree86.0.log file to the [EMAIL PROTECTED] list. The explanation for why the server doesn't like your video mode will be in that file. Mark. On Wed, 17 Nov 2004 [EMAIL PROTECTED] wrote: Dear Friends, I am unable to change mine screen resolution to 1024*468 i have tried using redhat-config-xfree86 and editing /etc/X11/XF86Config .One of mine friend asked for 'dmesg' report. I do not know much about it but i am sending you this. Perhaps this might help u helping me. Please help me. I shall be very grateful. Thanks in advance for your time and effort. -- Regards, Abhishek jain Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 0980 (usable) BIOS-e820: - 0001 (reserved) 0MB HIGHMEM available. 152MB LOWMEM available. On node 0 totalpages: 38912 zone(0): 4096 pages. zone(1): 34816 pages. zone(2): 0 pages. Kernel command line: ro root=LABEL=/ hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 551.256 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1101.00 BogoMIPS Memory: 148860k/155648k available (1347k kernel code, 5184k reserved, 999k data, 132k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU serial number disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff CPU: Common caps: 0383f9ff CPU: Intel Pentium III (Katmai) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb480, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router SIS [1039/0008] at 00:01.0 isapnp: Scanning for PnP cards... isapnp: No Plug Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 00:00.1 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SiS620 ATA 66 controller ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:DMA spurious 8259A interrupt: IRQ15. hda: ST310212A, ATA DISK drive hdb: ST340014A, ATA DISK drive blk: queue c03c9f40, I/O limit 4095Mb (mask 0x) blk: queue c03ca084, I/O limit 4095Mb (mask 0x) hdd: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area = 1 hda: 20005650 sectors (10243 MB) w/512KiB Cache, CHS=1245/255/63, UDMA(66) hdb: host protected area = 1 hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(66) ide-floppy driver 0.99.newide Partition check: hda: hda1 hdb: hdb1 hdb2 hdb5 hdb6 hdb7 hdb8 ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0
[XFree86] (no subject)
Do you want a Watch? http://qbk.afeet.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] ATI Mobility Radeon 7000 (notebook) not recognized - not supported??
Hello Ian, Thanks for your explanation! So the bottom line for me: - IGP and M6 is not the same chip - Since I only find IGP in the radeon driver documentation for XFree86, while my own system has an M6, which is not mentioned, there is a good chance that it is indeed not supported, and that the reason why all XFree86 programs fail might be exactly that :-( Greetings, Cornelis -- Cornelis Bockemuehl CH-4059 Basel [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] ATI Mobility Radeon 7000 (notebook) not recognized - not supported??
Cornelis Bockemuehl wrote: Hello Ian, Thanks for your explanation! So the bottom line for me: - IGP and M6 is not the same chip Correct. - Since I only find IGP in the radeon driver documentation for XFree86, while my own system has an M6, which is not mentioned, there is a good chance that it is indeed not supported, and that the reason why all XFree86 programs fail might be exactly that :-( AFAIK, it *should* be supported. At least from the 3D perspective, which is the only area I really know, the M6 and the desktop Radeon 7000 are identical. Since the 7000 is supported, and has been for a long time, the M6 should be as well. Afterall, the M6 is more than 2 years old. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] ATI Mobility Radeon 7000 (notebook) not recognized - not supported??
M6 is supported for sure, i have it on a asus notebook with red hat EL 3.0... so not very new XFree good luck --- Ian Romanick [EMAIL PROTECTED] wrote: Cornelis Bockemuehl wrote: Hello Ian, Thanks for your explanation! So the bottom line for me: - IGP and M6 is not the same chip Correct. - Since I only find IGP in the radeon driver documentation for XFree86, while my own system has an M6, which is not mentioned, there is a good chance that it is indeed not supported, and that the reason why all XFree86 programs fail might be exactly that :-( AFAIK, it *should* be supported. At least from the 3D perspective, which is the only area I really know, the M6 and the desktop Radeon 7000 are identical. Since the 7000 is supported, and has been for a long time, the M6 should be as well. Afterall, the M6 is more than 2 years old. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 __ Do you Yahoo!? Meet the all-new My Yahoo! - Try it today! http://my.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] basement, the trees in
Hello, Resently we sent you an email about mor t g age r at e going up, just from last week that ra t es went up by 2 point. Its not to late to lock your mor tg age. You can qualifiy to get a 400, 000 at 400 a month. But please act fast as the ra tes will not stay low for much longer. http://www.trnnet.com/ Thank you, Best regards, Gagnon ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] (no subject)
Want a Watch? http://ulg.afeet.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] ATI Mobility Radeon 7000 (notebook) not recognized - not supported??
M6 is supported for sure, i have it on a asus notebook with red hat EL 3.0... so not very new XFree good luck Thanks, also to Ian! So I will have to catch the user error - somewhere, somehow ;-) Greetings, Cornelis Bockemühl ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Elo Touchscreen
Hello list, I have some problems with the configuration and installation of an Elo Systems touchscreen under Fedora Core 2. I'm using: X Protocol Version 11, Revision 0, Release 6.7. Following the instructions on Elo's site at http://www.elotouch.com/Support/linux.asp I added the needed options in the xorg.conf file: snip Section ServerLayout Identifier Default Layout Screen 0 Screen0 0 0 InputDevice Mouse0 CorePointer InputDevice Keyboard0 CoreKeyboard Inputdevice touchscreen1 SendCoreEvents EndSection # # Touchscreen section # # Section Inputdevice Identifier touchscreen1 Driver elographics Option Device /dev/ttyS0 Option AlwaysCore Option screenno 0 Option MinX 600 Option MaxX 3600 Option MinY 600 Option MaxY 3600 Option UntouchDelay 3 Option ReportDelay 1 EndSection /snip I detect the touchscreen at /det/ttyS0, but in the Xorg.0.log file I get the following messages and errors: snip (II) LoadModule: elographics (II) Loading /usr/X11R6/lib/modules/input/elographics_drv.o (II) Module elographics: vendor=X.Org Foundation compiled for 6.7.0, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (**) Option AlwaysCore (**) TOUCHSCREEN: always reports core events (**) Elographics X device name: TOUCHSCREEN (**) Option ScreenNo 0 (**) Elographics associated screen: 0 (**) Option UntouchDelay 3 (**) Elographics untouch delay: 30 ms (**) Option ReportDelay 1 (**) Elographics report delay: 10 ms (**) Option MaxX 3600 (**) Elographics maximum x position: 3600 (**) Option MinX 600 (**) Elographics minimum x position: 600 (**) Option MaxY 3600 (**) Elographics maximum y position: 3600 (**) Option MinY 600 (**) Elographics minimum y position: 600 (**) Elographics device will work in Landscape mode (II) XINPUT: Adding extended input device TOUCHSCREEN (type: Elographics TouchScreen) //this is repeated a lot of times (--) Elographics touchscreen is a DuraTouch, connected through a serial link. (--) The controller is a model E281-2310, firmware revision 1.3. Unable to change Elographics touchscreen operating mode Not at the specified rate or model 2310, will continue Elographics: Dropping one byte in an attempt to synchronize: ' Elographics: Dropping one byte in an attempt to synchronize: ' Elographics: Dropping one byte in an attempt to synchronize: ' Elographics: Dropping one byte in an attempt to synchronize: ' Unable to ask Elographics touchscreen identification /snip Since a touch on the screen is detected at the port, and the server starts - can you tell me where's my mistake? Has anyone configured an Elo touchscreen under Fedora Core 2? Or at least tell me how to fix this. Thanks. -- Cyberly yours, Petar Nedyalkov Devoted Orbitel Fan :-) PGP ID: 7AE45436 PGP Public Key: http://bu.orbitel.bg/pgp/bu.asc PGP Fingerprint: 7923 8D52 B145 02E8 6F63 8BDA 2D3F 7C0B 7AE4 5436 pgpaPamuQj1Cb.pgp Description: signature