[yocto] qemux86 and generic86
Hi, I have a basic doubts on qemux86 build application image is not working on generic86 target. Suppose I have a application which I would like to test on target board, but the target board is not yet ready. If I will want to test that application I will use the qemu to test. But if I build the application for qemu, it does not work for actual target board. Could you please let me know the details reason. If I want to do like that what I should have to do. Thanks Regards Amit LT Technology Services Ltd www.LntTechservices.comhttp://www.lnttechservices.com/ This Email may contain confidential or privileged information for the intended recipient (s). If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system. -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] kernel config required for rt-kernel
Hi, I need help to build a rt-kernel. Is anyone knows about the real-time kernel configurations? How can I build a real-time kernel? What all are the kernel configuration need to be enable for rt-kernel? Thanks Regards Amit K The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] telnetd is not running with core-image-basic
Hi, I have fixed this issue to write the own recipe for inetutils-mytelnetd. Because with the inetutils- compile and install the success but telnetd does not be copied into the /usr/sbin So using the own recipe I have used the telnetd default installed location which is /usr/libexec/ It's working well now. Thanks Regards Amit K -Original Message- From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] On Behalf Of Amit Kumar Sent: Monday, October 28, 2013 12:14 PM To: Gary Thomas; yocto@yoctoproject.org Subject: Re: [yocto] telnetd is not running with core-image-basic Hi, I have tried with adding the CORE_IMAGE_EXTRA_INSTALL += inetutils inetutils-telnetd in locl.conf file. But it doesn't work. I have doubt here the inetutils is a package not the binary which includes the telnet,telnetd,tftp,tftpd and others. So, here I tried to add the telnetd instead of inetutils, but still it not working, I did not get the binary on target. I want to run the telned and tftpd binary or daemons at bootup time. Which is not happening. Even after boot telnetd and tftpd binary itself not present on target. Please help me on that. Thanks Amit K -Original Message- From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] On Behalf Of Gary Thomas Sent: Sunday, October 27, 2013 10:29 PM To: yocto@yoctoproject.org Subject: Re: [yocto] telnetd is not running with core-image-basic On 2013-10-25 23:17, Amit Kumar wrote: Hi, I tried to run the telnetd with core-image-basic. I follow up the following step to enable the telnetd support in my layer. I have build the latest inetutils recipe with my layer, the latest version of inteutils is intetutils_1.9.1. I have build the packages successful. But the telnetd is not available in my core-image-basic. When i run the the image under QEMU, there is no telnetd under /usr/sbin/ or /usr/bin. It's not present at all. I have also tried to add the initscript-telnetd refer from meta-arago. But not succeed. Please guild me- how can i will get it with my core-image-basic image. Am i missing any step here for that? Building the package is not enough by itself. You need to get it added to the image that you are using. This can be done either at build time or at run time. To add the package at build time, simply add this to your local.conf: CORE_IMAGE_EXTRA_INSTALL += inetutils inetutils-telnetd -- Gary Thomas | Consulting for the MLB Associates |Embedded world ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] telnetd is not running with core-image-basic
Hi, I have tried with adding the CORE_IMAGE_EXTRA_INSTALL += inetutils inetutils-telnetd in locl.conf file. But it doesn't work. I have doubt here the inetutils is a package not the binary which includes the telnet,telnetd,tftp,tftpd and others. So, here I tried to add the telnetd instead of inetutils, but still it not working, I did not get the binary on target. I want to run the telned and tftpd binary or daemons at bootup time. Which is not happening. Even after boot telnetd and tftpd binary itself not present on target. Please help me on that. Thanks Amit K -Original Message- From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] On Behalf Of Gary Thomas Sent: Sunday, October 27, 2013 10:29 PM To: yocto@yoctoproject.org Subject: Re: [yocto] telnetd is not running with core-image-basic On 2013-10-25 23:17, Amit Kumar wrote: Hi, I tried to run the telnetd with core-image-basic. I follow up the following step to enable the telnetd support in my layer. I have build the latest inetutils recipe with my layer, the latest version of inteutils is intetutils_1.9.1. I have build the packages successful. But the telnetd is not available in my core-image-basic. When i run the the image under QEMU, there is no telnetd under /usr/sbin/ or /usr/bin. It's not present at all. I have also tried to add the initscript-telnetd refer from meta-arago. But not succeed. Please guild me- how can i will get it with my core-image-basic image. Am i missing any step here for that? Building the package is not enough by itself. You need to get it added to the image that you are using. This can be done either at build time or at run time. To add the package at build time, simply add this to your local.conf: CORE_IMAGE_EXTRA_INSTALL += inetutils inetutils-telnetd -- Gary Thomas | Consulting for the MLB Associates |Embedded world ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] telnetd is not running with core-image-basic
Hi, I tried to run the telnetd with core-image-basic. I follow up the following step to enable the telnetd support in my layer. I have build the latest inetutils recipe with my layer, the latest version of inteutils is intetutils_1.9.1. I have build the packages successful. But the telnetd is not available in my core-image-basic. When i run the the image under QEMU, there is no telnetd under /usr/sbin/ or /usr/bin. It's not present at all. I have also tried to add the initscript-telnetd refer from meta-arago. But not succeed. Please guild me- how can i will get it with my core-image-basic image. Am i missing any step here for that? Thanks Regards Amit K The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] FW: How to enable the LTP in “core-image-basic”
Hi, I wants to share that - LTP packages has been build with core-image-basic. Now the core-image-basic includes the ltp test scripts. I got the ltp test script on the QEMU and target under the /opt/ltp. I have executed the LTP test script successfully on QEMU as well as target. Thanks a lot for the support. Thanks Regards Amit K From: yocto-boun...@yoctoproject.org [yocto-boun...@yoctoproject.org] On Behalf Of Amit Kumar [amit.ku...@lntinfotech.com] Sent: Sunday, October 20, 2013 7:24 AM To: yocto@yoctoproject.org Subject: [yocto] How to enable the LTP in “core-image-basic” Hi, How to enable the LTP in “core-image-basic” I have tried to enable the LTP for “core-image-basic” for that i have edit “core-image-basic.bb” -- IMAGE_FEATURES += ssh-server-openssh ltp but the final executable image does not contains the ltp utiltiy. Than i tried the add the “tools-testapp” but in that case also in final image no ltp. Also tried to add the RDEPEND_${PN} += ltp in the image recipe file but still in am not able to see the ltp image in my final running image on qemu. In all the cases during the bitbake build the ltp packages has been build but the image is not yet added in final running image. Could you please suggest me what setp is missing, why it's not get added in my final image? Thanks Regards Amit K The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] How to enable the LTP in “core-image-basic”
Hi, How to enable the LTP in “core-image-basic” I have tried to enable the LTP for “core-image-basic” for that i have edit “core-image-basic.bb” -- IMAGE_FEATURES += ssh-server-openssh ltp but the final executable image does not contains the ltp utiltiy. Than i tried the add the “tools-testapp” but in that case also in final image no ltp. Also tried to add the RDEPEND_${PN} += ltp in the image recipe file but still in am not able to see the ltp image in my final running image on qemu. In all the cases during the bitbake build the ltp packages has been build but the image is not yet added in final running image. Could you please suggest me what setp is missing, why it's not get added in my final image? Thanks Regards Amit K The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] how to enable the LTP in core-image-basic
Hi, I wants to use the LTP test suite provided by yocto project. But I don't know how to enable it for core-image-basic. Can anyone help me to enable the LTP in core-image-basic? Thanks Regards Amit K The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Build all linux utility's without busybox
Hi, I wanted to build the poky image core-image-minimal without busybox support. Is that possible? If it's possible how can we do it. I wants to build the all busybox supported utility without busybox. I wants to build them separately. I don't want the busybox, if anyone has an idea please let me know how can we do it. Thanks Regards Amit K The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] OE recipes- linphone build error in poky-9.0.0 build environment
Thanks for replay, I have follow the steps suggested by Mr. Paul, but still i am facing an error. I wants to build the linphone along with my Yocto Project build environment setup. I found linphone recipes in openembedded git. I have added that recipe and also add the dependancy recipes libosip2 and also modify .bb files. But still i am getting build error. // Loading cache: 100% |#| ETA: 00:00:00 Loaded 1128 entries from dependency cache. Build Configuration: BB_VERSION= 1.18.0 BUILD_SYS = i686-linux NATIVELSBSTRING = Ubuntu-12.04 TARGET_SYS= arm-poky-linux-gnueabi MACHINE = qemuarm DISTRO= poky DISTRO_VERSION= 1.4 TUNE_FEATURES = armv5 thumb dsp TARGET_FPU= soft meta meta-yocto meta-yocto-bsp meta-linphone = unknown:unknown NOTE: Resolving any missing task queue dependencies NOTE: Preparing runqueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks ERROR: Fetcher failure for URL: 'http://download.savannah.nongnu.org/releases/linphone/1.6.x/sources/linphone-1.6.0.tar.gz'. No checksum specified for /home/yocto/YOCTO/poky-dylan-9.0.0/build/downloads/linphone-1.6.0.tar.gz, please add at least one to the recipe: SRC_URI[md5sum] = fb345125e23c787df0818ff7caad5515 SRC_URI[sha256sum] = ba1c32207fd62d374c9397a81fb1247da93edb859e30d0d855dc65e5457f690b ERROR: Function failed: Fetcher failure for URL: 'http://download.savannah.nongnu.org/releases/linphone/1.6.x/sources/linphone-1.6.0.tar.gz'. No checksum specified for /home/yocto/YOCTO/poky-dylan-9.0.0/build/downloads/linphone-1.6.0.tar.gz, please add at least one to the recipe: SRC_URI[md5sum] = fb345125e23c787df0818ff7caad5515 SRC_URI[sha256sum] = ba1c32207fd62d374c9397a81fb1247da93edb859e30d0d855dc65e5457f690b ERROR: Logfile of failure stored in: /home/yocto/YOCTO/poky-dylan-9.0.0/build/tmp/work/armv5te-poky-linux-gnueabi/linphone/1.6.0-r3/temp/log.do_fetch.3098 ERROR: Task 358 (/home/yocto/YOCTO/poky-dylan-9.0.0/meta-linphone/recipes-linphone/linphone/linphone_1.6.0.bb, do_fetch) failed with exit code '1' ERROR: libosip2: Recipe file does not have license file information (LIC_FILES_CHKSUM) ERROR: Licensing Error: LIC_FILES_CHKSUM does not match, please fix ERROR: Function failed: do_qa_configure ERROR: Logfile of failure stored in: /home/yocto/YOCTO/poky-dylan-9.0.0/build/tmp/work/armv5te-poky-linux-gnueabi/libosip2/3.5.0-r0/temp/log.do_configure.3078 ERROR: Task 1024 (/home/yocto/YOCTO/poky-dylan-9.0.0/meta-linphone/recipes-linphone/libosip2/libosip2_3.5.0.bb, do_configure) failed with exit code '1' NOTE: Tasks Summary: Attempted 4749 tasks of which 4747 didn't need to be rerun and 2 failed. Waiting for 0 running tasks to finish: Summary: 2 tasks failed: // Do anyone knows how to fix the LIC_FILES_CHKSUM for libosip2 .bb file or linphone .bb file. Please suggest me how to fix this error. Thanks Regards Amit K. From: Paul Eggleton [paul.eggle...@linux.intel.com] Sent: Wednesday, August 28, 2013 1:43 PM To: Amit Kumar Cc: yocto@yoctoproject.org Subject: Re: [yocto] OE recipes- linphone build error in poky-9.0.0 build environment Hi Amit, On Wednesday 28 August 2013 09:05:28 Amit Kumar wrote: I wants to build the recipes name linphone(SIP-based IP phone) with poky-9.0.0 build environment. I found he linphone recipes under the angstrom-openembedded. In my poky build environment I have created the new layer, name linphone, and copy the .bb files. But when i am building it through an dependency error. Do anyone have done it before, please guide me how to fix this error. yocto@yocto-HP:~/YOCTO/poky-dylan-9.0.0/build$ bitbake linphone-image Loading cache: 100% |## ###| ETA: 00:00:00 Loaded 1126 entries from dependency cache. Build Configuration: BB_VERSION= 1.18.0 BUILD_SYS = i686-linux NATIVELSBSTRING = Ubuntu-12.04 TARGET_SYS= arm-poky-linux-gnueabi MACHINE = qemuarm DISTRO= poky DISTRO_VERSION= 1.4 TUNE_FEATURES = armv5 thumb dsp TARGET_FPU= soft meta meta-yocto meta-yocto-bsp meta-linphone = unknown:unknown NOTE: Resolving any missing task queue dependencies ERROR: Nothing PROVIDES 'libosip2' (but /home/yocto/YOCTO/poky-dylan-9.0.0/meta-linphone/recipes-linphone/linphone/ linphone_1.6.0.bb DEPENDS on or otherwise requires it) NOTE: Runtime target 'linphone' is unbuildable, removing... Missing or unbuildable dependency chain was: ['linphone', 'libosip2'] ERROR: Required build target 'linphone-image' has no buildable providers. Missing or unbuildable dependency chain was: ['linphone
[yocto] OE recipes- linphone build error in poky-9.0.0 build environment
Hi, I wants to build the recipes name linphone(SIP-based IP phone) with poky-9.0.0 build environment. I found he linphone recipes under the angstrom-openembedded. In my poky build environment I have created the new layer, name linphone, and copy the .bb files. But when i am building it through an dependency error. Do anyone have done it before, please guide me how to fix this error. yocto@yocto-HP:~/YOCTO/poky-dylan-9.0.0/build$ bitbake linphone-image Loading cache: 100% |#| ETA: 00:00:00 Loaded 1126 entries from dependency cache. Build Configuration: BB_VERSION= 1.18.0 BUILD_SYS = i686-linux NATIVELSBSTRING = Ubuntu-12.04 TARGET_SYS= arm-poky-linux-gnueabi MACHINE = qemuarm DISTRO= poky DISTRO_VERSION= 1.4 TUNE_FEATURES = armv5 thumb dsp TARGET_FPU= soft meta meta-yocto meta-yocto-bsp meta-linphone = unknown:unknown NOTE: Resolving any missing task queue dependencies ERROR: Nothing PROVIDES 'libosip2' (but /home/yocto/YOCTO/poky-dylan-9.0.0/meta-linphone/recipes-linphone/linphone/linphone_1.6.0.bb DEPENDS on or otherwise requires it) NOTE: Runtime target 'linphone' is unbuildable, removing... Missing or unbuildable dependency chain was: ['linphone', 'libosip2'] ERROR: Required build target 'linphone-image' has no buildable providers. Missing or unbuildable dependency chain was: ['linphone-image', 'linphone', 'libosip2'] Summary: There were 2 ERROR messages shown, returning a non-zero exit code. /// Thanks Regards Amit K The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Build packages-ssh, telnet, alsa and other package for arm
Hi Raj, Thanks for the suggestion, I have built the image as core-image-base , now I got the ssh, sftp working with my image. But some more packages I need like- gtk+, I have taken those packages using the hob and build the image bitbake core-image-base, But when I check that image using QEMU the libgtk does not present. I am not able to test or run my gtk app in QEMU. How do I get it in my image. If I build core-image-sato the libgtk present and I can test my app, but the image size is too big. Is there anyway either reduce the image-sato size or include the gtk support in core-image-base? Thanks Regards Amit K From: Khem Raj [mailto:raj.k...@gmail.com] Sent: Wednesday, August 14, 2013 11:37 AM To: Amit Kumar Cc: yocto@yoctoproject.org Subject: Re: [yocto] Build packages-ssh,telnet,alsa and other package for arm On Aug 13, 2013, at 10:49 PM, Amit Kumar amit.ku...@lntinfotech.commailto:amit.ku...@lntinfotech.com wrote: Hi, Using the Yocto Project 1.4, I want to build the packages like ssh, telnet, alias and other library packages for arm. I am not getting an idea how I should have to add those packages in my build environment. I want to build them and test, using the QEMU, is that possible? I want to build them for arm. You can start by building a reference image e.g. core-image-basic and then add the packages as you want extra I would encourage to read through the manual https://www.yoctoproject.org/docs/current/poky-ref-manual/poky-ref-manual.html especially IMAGE_FEATURES and IMAGE_INSTALL and CORE_IMAGE_EXTRA_INSTALL variables. Thanks Regards Amit K The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.orgmailto:yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Build packages-ssh,telnet,alsa and other package for arm
Hi, Using the Yocto Project 1.4, I want to build the packages like ssh, telnet, alias and other library packages for arm. I am not getting an idea how I should have to add those packages in my build environment. I want to build them and test, using the QEMU, is that possible? I want to build them for arm. Thanks Regards Amit K The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] FW: Regarding offline build
Hi, I am still struggling to build the yocto project offline. Please find below the details of DL_DIR after the bitbake -c fetchall core-image-minimal step. If anyone have idea about this, please guide me. Thanks Regards Amit K From: yocto-boun...@yoctoproject.org [yocto-boun...@yoctoproject.org] On Behalf Of Amit Kumar [amit.ku...@lntinfotech.com] Sent: Wednesday, July 24, 2013 10:05 PM To: Gary Thomas; yocto@yoctoproject.org Subject: Re: [yocto] FW: Regarding offline build Hi, I have tried the steps suggested by Mr. Paul. But still i am facing an error to build yocto project offline. First - I use the machine that have full Internet access and execute the - bitbake -c fetchall core-image-minimal Before that i have enabled the DL_DIR in conf/local.conf file. One the fetching done, i remove the internet and build the image - bitbake -k core-image-minimal But still i am facing an error, some packages still required internet access during build. Please find the attached error log with this mail. Please let me know if i missed out any step. This process should have worked. What files were in your DL_DIR at the end of the fetchall step? After the end of fetchall step.. the files avaliable under the download is - amit@amit-HP:~/Downloads/poky-dylan-9.0.1/build$ cd downloads/ backport/debian/ eglibc-2.17/ etc/ git2/licenses/ share/ amit@amit-HP:~/Downloads/poky-dylan-9.0.1/build$ /// Check again after the build error - amit@amit-HP:~/Downloads/poky-dylan-9.0.1/build/downloads$ ls 0001-crtstuff.c-USE_PT_GNU_EH_FRAME-Define-for-systems-us.patch.done host.conf.done 0001-eglibc-menuconfig-support.patch.done hostname.sh.done 0001-eglibc-run-libm-err-tab.pl-with-specific-dirs-in-S.patch.donehosts.done 0001-Fixing-keyboard_force_release.sh-shell-script-path.patch.done hwclock.sh.done 0001-libffi-update-for-3.0.11.patch.done improve_auto_header_gen.patch.done 0001-Makefile.in-vis_hide-gen-hide-list-Do-not-make-defin.patch.done inetd.conf.done 0001-man-disable-man-page-generation-because-we-don-t-hav.patch.done inetd.done 0001-R_ARM_TLS_DTPOFF32.patch.doneinit.done 0002-eglibc-menuconfig-hex-string-options.patch.done initgroups_keys.patch.done 0003-eglibc-menuconfig-build-instructions.patch.done inittab.done 04-default-is-optimized.patch.done input.patch.done 05-enable-ctypes-cross-build.patch.done inputrc.done 06-ctypes-libffi-fix-configure.patch.done install.patch.done 100-uclibc-conf.patch.done interfaces.done 10-distutils-fix-swig-parameter.patch.done int-is-not-the-same-size-as-size_t.patch.done 11-distutils-never-modify-shebang-line.patch.done IO-acquire-lock-fix.patch.done 12-distutils-prefix-is-inside-staging-area.patch.done issue.done 187b7b1646ee.patch.done issue.net.done 200-uclibc-locale.patch.done kconfig-frontends-3.8.0.0.tar.xz 203-uclibc-locale-no__x.patch.done kconfig-frontends-3.8.0.0.tar.xz.done 204-uclibc-locale-wchar_fix.patch.done ldflags.patch.done 205-uclibc-locale-update.patch.done lib-build-fix.patch.done 301-missing-execinfo_h.patch.done libcap2_2.22.orig.tar.gz 302-c99-snprintf.patch.done libcap2_2.22.orig.tar.gz.done 303-c99-complex-ugly-hack.patch.done libffi-3.0.11.tar.gz 304-index_macro.patch.done libffi-3.0.11.tar.gz.done 305-libmudflap-susv3-legacy.patch.done libgcc-sjlj-check.patch.done 306-libstdc++-namespace.patch.done libgcrypt-1.5.0.tar.gz 64bithack.patch.done libgcrypt-1.5.0.tar.gz.done 740-sh-pr24836.patch.done libgpg-error-1.11.tar.bz2 800-arm-bigendian.patch.done libgpg-error-1.11.tar.bz2.done aarch64-adding-build-support.patch.done libiberty_path_fix.patch.done ac_config_links.patch.done libmpc_fix_for_automake-1.12.patch.done acinclude.m4.done
[yocto] FW: Regarding offline build
-Original Message- From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] On Behalf Of Amit Kumar Sent: Wednesday, July 24, 2013 8:10 AM To: Paul Eggleton Cc: yocto@yoctoproject.org; lee_ball...@dell.com Subject: Re: [yocto] Regarding offline build Hi, I have tried the steps suggested by Mr. Paul. But still i am facing an error to build yocto project offline. First - I use the machine that have full Internet access and execute the - bitbake -c fetchall core-image-minimal Before that i have enabled the DL_DIR in conf/local.conf file. One the fetching done, i remove the internet and build the image - bitbake -k core-image-minimal But still i am facing an error, some packages still required internet access during build. Please find the attached error log with this mail. Please let me know if i missed out any step. Thanks Regards Amit K From: Paul Eggleton [paul.eggle...@linux.intel.com] Sent: Tuesday, July 23, 2013 4:05 PM To: Amit Kumar Cc: lee_ball...@dell.com; yocto@yoctoproject.org Subject: Re: [yocto] Regarding offline build Amit Kumar wrote: To build the Yocot Project offline, i have done the following- [1] Downloaded the Poky-latest.tar.bz2 [2] Untar it. and enter the poky dir. [3] execute the - source oe-init-build-env [4] edit the conf/local.conf file as per ur suggesion. [5] Build the image - bitbake core-image-minimal But still i am getting an error- To have to look into the error plz find the attached error log- The missing step is you haven't populated DL_DIR (defaults to downloads/ under the build directory) with files that would normally be downloaded by the system, so it is attempting to download them and stopping because BB_NO_NETWORK is set, hence: | ERROR: Function failed: Network access disabled through BB_NO_NETWORK The easiest thing to do is to go to a machine that does have full internet access, untar poky, source oe-init-build-env and then run: bitbake -c fetchall imagename Then copy the contents of DL_DIR to the machine without network access and you should be ready to go. Cheers, Paul -- Paul Eggleton Intel Open Source Technology Centre The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail amit@amit-HP:~/Downloads/poky-dylan-9.0.1/build$ bitbake -c fetchall core-image-minimal Pseudo is not present but is required, building this first before the main build Parsing recipes: 100% |##| Time: 00:02:58 Parsing of 813 .bb files complete (0 cached, 813 parsed). 1120 targets, 27 skipped, 0 masked, 0 errors. Build Configuration: BB_VERSION= 1.18.0 BUILD_SYS = i686-linux NATIVELSBSTRING = Ubuntu-12.10 TARGET_SYS= i586-poky-linux MACHINE = qemux86 DISTRO= poky DISTRO_VERSION= 1.4.1 TUNE_FEATURES = m32 i586 TARGET_FPU= meta meta-yocto meta-yocto-bsp= unknown:unknown NOTE: Resolving any missing task queue dependencies NOTE: Preparing runqueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks NOTE: Tasks Summary: Attempted 63 tasks of which 0 didn't need to be rerun and all succeeded. Loading cache: 100% || ETA: 00:00:00 Loaded 1121 entries from dependency cache. Build Configuration: BB_VERSION= 1.18.0 BUILD_SYS = i686-linux NATIVELSBSTRING = Ubuntu-12.10 TARGET_SYS= i586-poky-linux MACHINE = qemux86 DISTRO= poky DISTRO_VERSION= 1.4.1 TUNE_FEATURES = m32 i586 TARGET_FPU= meta meta-yocto meta-yocto-bsp= unknown:unknown NOTE: Resolving any missing task queue dependencies NOTE: Preparing runqueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks WARNING: Failed to fetch URL http://www.zlib.net/zlib-1.2.7.tar.bz2, attempting MIRRORS if available WARNING: Failed to fetch URL http://www.apache.org/dist/apr/apr-util-1.5.1.tar.gz, attempting MIRRORS if available WARNING: Failed to fetch URL http://www.apache.org/dist/subversion/subversion-1.7.8.tar.bz2, attempting MIRRORS if available NOTE: Tasks Summary: Attempted 282 tasks of which 59 didn't need to be rerun and all succeeded. Summary: There were 3 WARNING messages shown. amit@amit-HP:~/Downloads/poky-dylan-9.0.1/build$ vim conf
Re: [yocto] FW: Regarding offline build
sysvinit-2.88dsf.tar.bz2 git2_git.gnome.org.gtk-doc-stub.tar.gz sysvinit-2.88dsf.tar.bz2.done git2_git.gnome.org.gtk-doc-stub.tar.gz.done testsuite-du-du-k-works-fix-false-positive.patch.done git2_github.com.philb.update-rc.d.git.tar.gz tic-hang.patch.done git2_github.com.philb.update-rc.d.git.tar.gz.done tinylogin-1.4.tar.bz2 git2_git.kernel.org.pub.scm.utils.kernel.kmod.kmod.git.tar.gz tinylogin-1.4.tar.bz2.done git2_git.kernel.org.pub.scm.utils.kernel.kmod.kmod.git.tar.gz.done trailingslash.patch.done git2_git.yoctoproject.org.linux-yocto-3.8.git.tar.gz trunk_opkg.googlecode.com_.svn_649_.tar.gz git2_git.yoctoproject.org.linux-yocto-3.8.git.tar.gz.done trunk_opkg.googlecode.com_.svn_649_.tar.gz.done git2_git.yoctoproject.org.yocto-kernel-tools.git.tar.gz tzselect-awk.patch.done git2_git.yoctoproject.org.yocto-kernel-tools.git.tar.gz.done tzselect-sh.patch.done glib-2.0_fix_for_x32.patch.done uclibc-__progname-conflict.patch.done glib-2.34.3.tar.xz udev-182.tar.gz glib-2.34.3.tar.xz.done udev-182.tar.gz.done glibc_crypt_fix.patch.done udev-cache.default.done GLIBC_DYNAMIC_LINKER.patch.done udev-cache.done glibc.fix_sqrt2.patch.done udev.rules.done glibconfig-sysdefs.h.done umount.busybox.done glib-gettextize-dir.patch.done umountfs.done GLRO_dl_debug_mask.patch.done umountnfs.sh.done gmp-5.1.0a.tar.bz2 unifdef.c.done gmp-5.1.0a.tar.bz2.done uninstall_force.patch.done gmp_fix_for_x32.patch.done unixccompiler.patch.done gnu-config-20120814.tar.bz2 urandom.done gnu-config-20120814.tar.bz2.done usbd.done gnu-configize.in.done usb-devices-avoid-dependency-on-bash.patch.done gnutls-2.12.21.tar.bz2 usbutils-006.tar.gz gnutls-2.12.21.tar.bz2.done usbutils-006.tar.gz.done gnutls_fix_for_automake_1.12.1.patch.done use-defaults.h-and-t-oe-in-B.patch.done gnutls-openssl.patch.done use-includedir.patch.done gperf-3.0.4.tar.gz use-ml-conf-files-from-B.patch.done gperf-3.0.4.tar.gz.done use_O2_option.patch.done GPLv2.patch.done use-sysroot-in-libpath.patch.done guess-fix.patch.done util-linux-2.22.2.tar.bz2 guilt_0.33.orig.tar.gz util-linux-2.22.2.tar.bz2.done guilt_0.33.orig.tar.gz.done util-linux-ng-2.16-mount_lock_path.patch.done guilt-bash.patch.done util-linux-ng-replace-siginterrupt.patch.done guilt-import-commit.patch.done v86d-0.1.10.tar.bz2 guilt-init.patch.done v86d-0.1.10.tar.bz2.done guilt.patch.done volatiles.done guilt-pop.patch.done watch.in.usr-bin.patch.done guilt-push-no-series.patch.done wcast-qual-PR55383.patch.done guilt-push.patch.done wget_dl_dir_fix.patch.done guilt-update-supported-git-versions-to-1.8.x.patch.done zlib-1.2.7.tar.bz2 halt.done zlib-1.2.7.tar.bz2.done amit@amit-HP:~/Downloads/poky-dylan-9.0.1/build/downloads$ From: yocto-boun...@yoctoproject.org [yocto-boun...@yoctoproject.org] On Behalf Of Gary Thomas [g...@mlbassoc.com] Sent: Wednesday, July 24, 2013 7:17 PM To: yocto@yoctoproject.org Subject: Re: [yocto] FW: Regarding offline build On 2013-07-24 06:48, Amit Kumar wrote: -Original Message- From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] On Behalf Of Amit Kumar Sent: Wednesday, July 24, 2013 8:10 AM To: Paul
Re: [yocto] Regarding offline build
Hi Mr. Lee Thanks for replay and suggesion to build Yocoto project offline. To build the Yocot Project offline, i have done the following- [1] Downloaded the Poky-latest.tar.bz2 [2] Untar it. and enter the poky dir. [3] execute the - source oe-init-build-env [4] edit the conf/local.conf file as per ur suggesion. [5] Build the image - bitbake core-image-minimal But still i am getting an error- To have to look into the error plz find the attached error log- If u have any idea about that error but guide me to fix it. Thnaks Regards Amit K From: lee_ball...@dell.com [lee_ball...@dell.com] Sent: Monday, July 22, 2013 7:49 PM To: Amit Kumar; yocto@yoctoproject.org Subject: RE: Regarding offline build Here are the lines in our local.conf that make it work. If you want you can use a local http mirror instead of file. DL_DIR ?= ${TOPDIR}/tmp/downloads-keepout SSTATE_DIR ?= ${TOPDIR}/sstate-cache # we build on isolated network, so disable all network access #don't really disable all network, as we need network to do sstate BB_NO_NETWORK = 0 INHERIT += own-mirrors SOURCE_MIRROR_URL ?= file://${TOPDIR}/../sources/ BB_GENERATE_MIRROR_TARBALLS = 1 BB_FETCH_PREMIRRORONLY = 1 CONNECTIVITY_CHECK_URIS= DISABLE_NETWORK_SANITY = 1 From: Amit Kumar [mailto:amit.ku...@lntinfotech.com] Sent: Sunday, July 21, 2013 11:44 PM To: Ballard, Lee; yocto@yoctoproject.org Subject: RE: Regarding offline build Hi Mr. Lee, Thanks for replay. I have still doubt to build offline. I have downloaded all the tar files, now what I should have to do? Do I need to modify all the *.bb files. Do you have any example to build it offline. I wants to build the MCSDK uses the Yocto Project. So for that I have download the mcsdk tar ball, which gives me all tar balls. Now I am not getting how to process to build Yocto project. If you have any idea please let me know. Thanks regards Amit K From: lee_ball...@dell.commailto:lee_ball...@dell.com [mailto:lee_ball...@dell.com] Sent: Tuesday, July 16, 2013 7:58 PM To: Amit Kumar; yocto@yoctoproject.orgmailto:yocto@yoctoproject.org Subject: RE: Regarding offline build We do offline builds. You need to download all the tar balls for all the open source recipes you build, or you can download pre-build images and SDK. Another way is to create a local mirror of all the tar balls you need. Lee Ballard Platform Software Principal Engineer Dell | Enterprise Product Group From: yocto-boun...@yoctoproject.orgmailto:yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] On Behalf Of Amit Kumar Sent: Tuesday, July 16, 2013 6:22 AM To: yocto@yoctoproject.orgmailto:yocto@yoctoproject.org Subject: [yocto] Regarding offline build Hi, I have quarry regarding the Yocto Project build offline. Is that possible to build the Yocto Project with internet access? I have download the poky-latest.tar.bz2, now I wants to build it independently without having internet connection. Do I need to download any other packages also to build it offline? Thanks Regards Amit K The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail Untitled 1.odt Description: Untitled 1.odt ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Regarding offline build
Hi, Please find the error log in text format. -Original Message- From: Paul Eggleton [mailto:paul.eggle...@linux.intel.com] Sent: Tuesday, July 23, 2013 3:21 PM To: Amit Kumar Cc: lee_ball...@dell.com; yocto@yoctoproject.org Subject: Re: [yocto] Regarding offline build On Tuesday 23 July 2013 12:11:33 Amit Kumar wrote: Hi Mr. Lee Thanks for replay and suggesion to build Yocoto project offline. To build the Yocot Project offline, i have done the following- [1] Downloaded the Poky-latest.tar.bz2 [2] Untar it. and enter the poky dir. [3] execute the - source oe-init-build-env [4] edit the conf/local.conf file as per ur suggesion. [5] Build the image - bitbake core-image-minimal But still i am getting an error- To have to look into the error plz find the attached error log- If u have any idea about that error but guide me to fix it. Amit, sorry to be a pain but would you mind attaching the error report as a plain text file rather than a word processing document? Thanks, Paul -- Paul Eggleton Intel Open Source Technology Centre The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail user@INFBA01401:~/Amitk/YOCTO/poky-dylan-9.0.1/build$ bitbake core-image-minimal Pseudo is not present but is required, building this first before the main build Loading cache: 100% |#| ETA: 00:00:00 Loaded 1121 entries from dependency cache. Build Configuration: BB_VERSION= 1.18.0 BUILD_SYS = i686-linux NATIVELSBSTRING = Ubuntu-12.04 TARGET_SYS= i586-poky-linux MACHINE = qemux86 DISTRO= poky DISTRO_VERSION= 1.4.1 TUNE_FEATURES = m32 i586 TARGET_FPU= meta meta-yocto meta-yocto-bsp= unknown:unknown NOTE: Resolving any missing task queue dependencies NOTE: Preparing runqueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks ERROR: Function failed: Network access disabled through BB_NO_NETWORK but access requested with command /usr/bin/env wget -t 2 -T 30 -nv --passive-ftp --no-check-certificate -P /home/user/Amitk/YOCTO/poky-dylan-9.0.1/downloads 'http://download.savannah.gnu.org/releases/quilt/quilt-0.60.tar.gz' (for url None) ERROR: Logfile of failure stored in: /home/user/Amitk/YOCTO/poky-dylan-9.0.1/build/tmp/work/i686-linux/quilt-native/0.60-r0/temp/log.do_fetch.13432 Log data follows: | DEBUG: Executing python function do_fetch | DEBUG: Executing python function base_do_fetch | DEBUG: Trying PREMIRRORS | DEBUG: For url ['http', 'download.savannah.gnu.org', | '/releases/quilt/quilt-0.60.tar.gz', '', '', {}] comparing ['cvs', | '.*', '/.*', '', '', {}] to ['file', '', | '/home/user/Amitk/YOCTO/poky-dylan-9.0.1/build/../sources/', '', '', | {}] | DEBUG: For url ['http', 'download.savannah.gnu.org', | '/releases/quilt/quilt-0.60.tar.gz', '', '', {}] comparing ['svn', | '.*', '/.*', '', '', {}] to ['file', '', | '/home/user/Amitk/YOCTO/poky-dylan-9.0.1/build/../sources/', '', '', | {}] | DEBUG: For url ['http', 'download.savannah.gnu.org', | '/releases/quilt/quilt-0.60.tar.gz', '', '', {}] comparing ['git', | '.*', '/.*', '', '', {}] to ['file', '', | '/home/user/Amitk/YOCTO/poky-dylan-9.0.1/build/../sources/', '', '', | {}] | DEBUG: For url ['http', 'download.savannah.gnu.org', | '/releases/quilt/quilt-0.60.tar.gz', '', '', {}] comparing ['hg', | '.*', '/.*', '', '', {}] to ['file', '', | '/home/user/Amitk/YOCTO/poky-dylan-9.0.1/build/../sources/', '', '', | {}] | DEBUG: For url ['http', 'download.savannah.gnu.org', | '/releases/quilt/quilt-0.60.tar.gz', '', '', {}] comparing ['bzr', | '.*', '/.*', '', '', {}] to ['file', '', | '/home/user/Amitk/YOCTO/poky-dylan-9.0.1/build/../sources/', '', '', | {}] | DEBUG: For url ['http', 'download.savannah.gnu.org', | '/releases/quilt/quilt-0.60.tar.gz', '', '', {}] comparing ['svk', | '.*', '/.*', '', '', {}] to ['file', '', | '/home/user/Amitk/YOCTO/poky-dylan-9.0.1/build/../sources/', '', '', | {}] | DEBUG: For url ['http', 'download.savannah.gnu.org', | '/releases/quilt/quilt-0.60.tar.gz', '', '', {}] comparing ['p4', | '.*', '/.*', '', '', {}] to ['file', '', | '/home/user/Amitk/YOCTO/poky-dylan-9.0.1/build/../sources/', '', '', | {}] | DEBUG: For url ['http', 'download.savannah.gnu.org', | '/releases/quilt/quilt-0.60.tar.gz', '', '', {}] comparing ['osc', | '.*', '/.*', '', '', {}] to ['file', '', | '/home/user/Amitk/YOCTO/poky-dylan-9.0.1/build/../sources/', '', '', | {}] | DEBUG: For url ['http
Re: [yocto] Regarding offline build
Hi, I have tried the steps suggested by Mr. Paul. But still i am facing an error to build yocto project offline. First - I use the machine that have full Internet access and execute the - bitbake -c fetchall core-image-minimal Before that i have enabled the DL_DIR in conf/local.conf file. One the fetching done, i remove the internet and build the image - bitbake -k core-image-minimal But still i am facing an error, some packages still required internet access during build. Please find the attached error log with this mail. Please let me know if i missed out any step. Thanks Regards Amit K From: Paul Eggleton [paul.eggle...@linux.intel.com] Sent: Tuesday, July 23, 2013 4:05 PM To: Amit Kumar Cc: lee_ball...@dell.com; yocto@yoctoproject.org Subject: Re: [yocto] Regarding offline build Amit Kumar wrote: To build the Yocot Project offline, i have done the following- [1] Downloaded the Poky-latest.tar.bz2 [2] Untar it. and enter the poky dir. [3] execute the - source oe-init-build-env [4] edit the conf/local.conf file as per ur suggesion. [5] Build the image - bitbake core-image-minimal But still i am getting an error- To have to look into the error plz find the attached error log- The missing step is you haven't populated DL_DIR (defaults to downloads/ under the build directory) with files that would normally be downloaded by the system, so it is attempting to download them and stopping because BB_NO_NETWORK is set, hence: | ERROR: Function failed: Network access disabled through BB_NO_NETWORK The easiest thing to do is to go to a machine that does have full internet access, untar poky, source oe-init-build-env and then run: bitbake -c fetchall imagename Then copy the contents of DL_DIR to the machine without network access and you should be ready to go. Cheers, Paul -- Paul Eggleton Intel Open Source Technology Centre The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail amit@amit-HP:~/Downloads/poky-dylan-9.0.1/build$ bitbake -c fetchall core-image-minimal Pseudo is not present but is required, building this first before the main build Parsing recipes: 100% |##| Time: 00:02:58 Parsing of 813 .bb files complete (0 cached, 813 parsed). 1120 targets, 27 skipped, 0 masked, 0 errors. Build Configuration: BB_VERSION= 1.18.0 BUILD_SYS = i686-linux NATIVELSBSTRING = Ubuntu-12.10 TARGET_SYS= i586-poky-linux MACHINE = qemux86 DISTRO= poky DISTRO_VERSION= 1.4.1 TUNE_FEATURES = m32 i586 TARGET_FPU= meta meta-yocto meta-yocto-bsp= unknown:unknown NOTE: Resolving any missing task queue dependencies NOTE: Preparing runqueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks NOTE: Tasks Summary: Attempted 63 tasks of which 0 didn't need to be rerun and all succeeded. Loading cache: 100% || ETA: 00:00:00 Loaded 1121 entries from dependency cache. Build Configuration: BB_VERSION= 1.18.0 BUILD_SYS = i686-linux NATIVELSBSTRING = Ubuntu-12.10 TARGET_SYS= i586-poky-linux MACHINE = qemux86 DISTRO= poky DISTRO_VERSION= 1.4.1 TUNE_FEATURES = m32 i586 TARGET_FPU= meta meta-yocto meta-yocto-bsp= unknown:unknown NOTE: Resolving any missing task queue dependencies NOTE: Preparing runqueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks WARNING: Failed to fetch URL http://www.zlib.net/zlib-1.2.7.tar.bz2, attempting MIRRORS if available WARNING: Failed to fetch URL http://www.apache.org/dist/apr/apr-util-1.5.1.tar.gz, attempting MIRRORS if available WARNING: Failed to fetch URL http://www.apache.org/dist/subversion/subversion-1.7.8.tar.bz2, attempting MIRRORS if available NOTE: Tasks Summary: Attempted 282 tasks of which 59 didn't need to be rerun and all succeeded. Summary: There were 3 WARNING messages shown. amit@amit-HP:~/Downloads/poky-dylan-9.0.1/build$ vim conf/local.conf amit@amit-HP:~/Downloads/poky-dylan-9.0.1/build$ amit@amit-HP:~/Downloads/poky-dylan-9.0.1/build$ cd downloads/ backport/debian/ eglibc-2.17/ etc/ git2/licenses/ share/ amit@amit-HP:~/Downloads/poky-dylan-9.0.1/build$ cd downloads/^C amit@amit-HP
Re: [yocto] Arago project image fail to run in QEMU
Hi Sudhangathan Thanks for replay. So i have to build a separate image to run under the QEMU, for that do i need to build it with my yocto project build environment with adding the layers. Or do i need to use the same build environment and just change the local.conf file? Keystone-II is a arm processor. Thanks Regards Amit K On Sat, Jul 20, 2013 at 8:41 AM, Sudhangathan BS sudhangat...@gmail.comwrote: Hi Amit, You have to build separate images to be run on qemu.. You have to set it in your local.conf file.. i.e. u have to change your build-target.. Images built to run on hardware cannot be run on qemu right now.. Virtualization is only available upto processor level, and not the complete hardware...! Which processor is keystone-II using..? Best, Sudhangathan B S amit kumar kumaramit...@gmail.com wrote: Hi, I have built the Arago project for keystone-II successfully. The images are available under the deploy/Images dir. I have already added my module into the kernel and recompiled the kernel image. Now my doubt is before putting the image on actual hardware I want to run it on QEMU. Is it possible to run the built images on QEMU? I tried to run using the following command but getting an error- /**/ amit@amit-HP:~/OE/MCSDK/mcsdk/build$ runqemu arago-tmp-external-linaro-toolchain/deploy/images/uImage-keystone-evm.bin arago-tmp-external-linaro-toolchain/deploy/images/core-image-minimal-keystone-evm-20130718181345.rootfs.ubi Error: unknown file arg [arago-tmp-external-linaro-toolchain/deploy/images/core-image-minimal-keystone-evm-20130718181345.rootfs.ubi] Usage: you can run this script with any valid combination of the following options (in any order): QEMUARCH - the qemu machine architecture to use KERNEL - the kernel image file to use ROOTFS - the rootfs image file or nfsroot directory to use MACHINE - the machine name (optional, autodetected from KERNEL filename if unspecified) RAMFS - boot a ramfs-based image Simplified QEMU command-line options can be passed with: nographic - disables video console serial - enables a serial console on /dev/ttyS0 kvm - enables KVM when running qemux86/qemux86-64 (VT-capable CPU required) qemuparams=xyz - specify custom parameters to QEMU bootparams=xyz - specify custom kernel parameters during boot Examples: runqemu qemuarm runqemu qemux86-64 core-image-sato ext3 runqemu path/to/bzImage-qemux86.bin path/to/nfsrootdir/ serial runqemu qemux86 ramfs runqemu qemux86 qemuparams=-m 256 runqemu qemux86 bootparams=psplash=false amit@amit-HP:~/OE/MCSDK/mcsdk/build$ /**/ The build step I followed from the arago project build link- http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment; Please let me know if I have to do something else to run the image under QEMU. -- Thanks Regards Amit Kumar -- yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- Sent from Kaiten Mail. Please excuse my brevity. -- Thanks Regards Amit Kumar ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Arago project image fail to run in QEMU
Hi, I have built the Arago project for keystone-II successfully. The images are available under the deploy/Images dir. I have already added my module into the kernel and recompiled the kernel image. Now my doubt is before putting the image on actual hardware I want to run it on QEMU. Is it possible to run the built images on QEMU? I tried to run using the following command but getting an error- /**/ amit@amit-HP:~/OE/MCSDK/mcsdk/build$ runqemu arago-tmp-external-linaro-toolchain/deploy/images/uImage-keystone-evm.bin arago-tmp-external-linaro-toolchain/deploy/images/core-image-minimal-keystone-evm-20130718181345.rootfs.ubi Error: unknown file arg [arago-tmp-external-linaro-toolchain/deploy/images/core-image-minimal-keystone-evm-20130718181345.rootfs.ubi] Usage: you can run this script with any valid combination of the following options (in any order): QEMUARCH - the qemu machine architecture to use KERNEL - the kernel image file to use ROOTFS - the rootfs image file or nfsroot directory to use MACHINE - the machine name (optional, autodetected from KERNEL filename if unspecified) RAMFS - boot a ramfs-based image Simplified QEMU command-line options can be passed with: nographic - disables video console serial - enables a serial console on /dev/ttyS0 kvm - enables KVM when running qemux86/qemux86-64 (VT-capable CPU required) qemuparams=xyz - specify custom parameters to QEMU bootparams=xyz - specify custom kernel parameters during boot Examples: runqemu qemuarm runqemu qemux86-64 core-image-sato ext3 runqemu path/to/bzImage-qemux86.bin path/to/nfsrootdir/ serial runqemu qemux86 ramfs runqemu qemux86 qemuparams=-m 256 runqemu qemux86 bootparams=psplash=false amit@amit-HP:~/OE/MCSDK/mcsdk/build$ /**/ The build step I followed from the arago project build link- http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment; Please let me know if I have to do something else to run the image under QEMU. -- Thanks Regards Amit Kumar ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Regarding offline build
Hi, I have quarry regarding the Yocto Project build offline. Is that possible to build the Yocto Project with internet access? I have download the poky-latest.tar.bz2, now I wants to build it independently without having internet connection. Do I need to download any other packages also to build it offline? Thanks Regards Amit K The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Yocto-1.4 Build error.
Hi, I am facing an error to build the fresh Yocto Project default disto Poky. I am using the following steps: [1] Ubuntu-12.04 [2] Install the required packages. [3] Download the latest yocto-1.4 release, poky-9.0.1.tar.bz2 [4] untar it - tar xvjf poky-9.0.1.tar.bz2 [5] cd poky.9.0.1 [6] source oe-init-build-env [7] bitbake -k core-image-minimal I am getting the following error: - user@INFBA01401:~/Amitk/YOCTO/poky-dylan-9.0.1/build$mailto:user@INFBA01401:~/Amitk/YOCTO/poky-dylan-9.0.1/build$ bitbake -k core-image-sato Pseudo is not present but is required, building this first before the main build ERROR: OE-core's config sanity checker detected a potential misconfiguration. Either fix the cause of this error or at your own risk disable the checker (see sanity.conf). Following is the list of potential problems / advisories: Failed to fetch test data from the network. Please ensure your network is configured correctly. ERROR: Execution of event handler 'check_sanity_eventhandler' failed user@INFBA01401:~/Amitk/YOCTO/poky-dylan-9.0.1/build$mailto:user@INFBA01401:~/Amitk/YOCTO/poky-dylan-9.0.1/build$ Do anyone have faced this error before, please guide me for the same? Thanks Amit K The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Error to Build Arago Yocto Project
Hi, I am building the Arago Yocto Project first time. I have follow the steps given in the Arago Project link - http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment#Detailed_Setup Error Log is - amit@amit-HP:~/tisdk/build$ MACHINE=am335x-evm bitbake core-image-minimal Pseudo is not present but is required, building this first before the main build ERROR: Unable to parse /home/amit/tisdk/sources/meta-arago/meta-arago-extras/recipes-qt/qt4/qt4-embedded-gles_4.8.4.bbhttp://qt4-embedded-gles_4.8.4.bb | ETA: --:--:-- Traceback (most recent call last): File /home/amit/tisdk/sources/bitbake/lib/bb/parse/parse_py/ConfHandler.py, line 68, in include(oldfn='/home/amit/tisdk/sources/meta-arago/meta-arago-extras/recipes-qt/qt4/qt4-embedded-gles_4.8.4.bbhttp://qt4-embedded-gles_4.8.4.bb', fn='/home/amit/tisdk/sources/oe-core/meta/recipes-qt/qt4/qt4-4.8.4.inc', lineno=1, data=bb.data_smart.DataSmart object at 0xa14f12c, error_out='include required'): try: ret = handle(fn, data, True) except IOError: File /home/amit/tisdk/sources/bitbake/lib/bb/parse/__init__.py, line 90, in handle(fn='/home/amit/tisdk/sources/oe-core/meta/recipes-qt/qt4/qt4-4.8.4.inc', data=bb.data_smart.DataSmart object at 0xa14f12c, include=True): if h['supports'](fn, data): return h['handle'](fn, data, include) raise ParseError(not a BitBake file, fn) File /home/amit/tisdk/sources/bitbake/lib/bb/parse/parse_py/BBHandler.py, line 142, in handle(fn='/home/amit/tisdk/sources/oe-core/meta/recipes-qt/qt4/qt4-4.8.4.inc', d=bb.data_smart.DataSmart object at 0xa14f12c, include=True): if include: bb.parse.mark_dependency(d, abs_fn) File /home/amit/tisdk/sources/bitbake/lib/bb/parse/__init__.py, line 76, in mark_dependency(d=bb.data_smart.DataSmart object at 0xa14f12c, f='/home/amit/tisdk/sources/oe-core/meta/recipes-qt/qt4/qt4-4.8.4.inc'): f = %s/%s % (os.getcwd(), f[2:]) deps = (d.getVar('__depends') or []) + [(f, cached_mtime(f))] d.setVar('__depends', deps) File /home/amit/tisdk/sources/bitbake/lib/bb/parse/__init__.py, line 58, in cached_mtime(f='/home/amit/tisdk/sources/oe-core/meta/recipes-qt/qt4/qt4-4.8.4.inc'): if f not in __mtime_cache: __mtime_cache[f] = os.stat(f)[stat.ST_MTIME] return __mtime_cache[f] OSError: [Errno 2] No such file or directory: '/home/amit/tisdk/sources/oe-core/meta/recipes-qt/qt4/qt4-4.8.4.inc' ERROR: Command execution failed: Exited with 1 Summary: There were 2 ERROR messages shown, returning a non-zero exit code. amit@amit-HP:~/tisdk/build$ cd ../sources/oe-core/meta/recipes-qt/ Is anybody have faced the same error or anybody know the reason of this error? Please help me out for the same. Thanks AmitK The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. LT Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto