Certain targets like the female form sometimes breaks the coupling with the
steering mechanism.
Sent from my iPhone
> On Nov 6, 2019, at 1:04 PM, castarritt . wrote:
>
>
> The sensors are excellent, but there seems to be a manufacturing defect in
> the majority of the mark one human skull p
Nope.
Reportedly birds are damaging cables between an outdoor CMM4 and the
APs. I'm just looking at a handful of 20-30 ft bird resistant jumpers.
We'll probably end up just making them ourselves, but I was curious how
much ready made jumpers would run.
On 11/6/2019 3:32 PM, Ken Hohhof wro
Best Tronics could probably make them as long as you need enough to warrant
stocking the cable.
Question – do you intend to use grounding glands per the Cambium method?
From: AF On Behalf Of Daniel White
Sent: Wednesday, November 6, 2019 2:07 PM
To: AnimalFarm Microwave Users Group
Su
Adam talk to WAV (or also now LMG). WAV does cable assemblies with some
spiffy machines in IL.
photograph
Daniel White
Co-Founder & Managing Director of Operations
phone: +1 (702) 470-2766
direct:+1 (702) 470-2770
Adam Moffett wrote on 11/6/19 09:42:
If you wanted some pre-terminated jum
I've never used these but I would give them a try for this application:
https://www.ui.com/unifi-switching/unifi-switch-flex/
photograph
Daniel White
Co-Founder & Managing Director of Operations
phone: +1 (702) 470-2766
direct:+1 (702) 470-2770
Lincs_Chel wrote on 11/5/19 23:22:
Hi;
Wor
I think one would have to make them I have not seen any pre-terminated
except the ones in the cambium Lpu kits
On 11/6/19 10:42 AM, Adam Moffett wrote:
If you wanted some pre-terminated jumpers made of Superior Essex BBDGE
or equivalent then where would you buy them?
--
AF mailing list
The sensors are excellent, but there seems to be a manufacturing defect in
the majority of the mark one human skull processing systems that they are
attached to. This is especially evident when the system is being used for
control and guidance of a motor vehicle.
On Wed, Nov 6, 2019 at 11:39 AM R
& the very special ability to be focused right on the source signal and
yet not show any information actually received...
On 11/06/2019 08:49 AM, Adam Moffett wrote:
I forgot to mention the antennas have manual and automatic mechanical
beam steering and they connect to an extensive signal proce
I forgot to mention the antennas have manual and automatic mechanical
beam steering and they connect to an extensive signal processing network
with billions of nodes. Some do come with minor manufacturing defects,
but those can be corrected with inexpensive 3rd party after market
antenna acces
If you wanted some pre-terminated jumpers made of Superior Essex BBDGE
or equivalent then where would you buy them?
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
They come as standard equipment on the mark one human skull. They're
tuned for 430THz to 700THz and come equipped with a pair of spatial
diversity sector antennas with a 30 degree beamwidth and steady drop off
to zero gain around 120 degrees.
The front to back ratio is ginormous unless you're
I think the shear power of such a tool may cause temporary teleportation
of ones self to parts unknown.
On 11/5/19 10:09 PM, Colin Stanners wrote:
I have a pretty good idea to create some, but it's a massive project
and I constantly lack energy and time...
On Tue, Nov 5, 2019, 9:48 PM Ken Ho
12 matches
Mail list logo