Hi Sebastien,
For reasons that I don't understand, it worked this morning.
(I did restart my computer, installed some other applications, etc. I am
running Ubuntu16 on VMware hosted on a Windows 10 laptop and my guess is
the updates of programs changed a permission.)
For completeness the error
On Tuesday, May 24, 2016 12:47 PM, Ken Brown wrote:
I am having a problem with the socket connection. After I run pppd, I
receive a modem hangup message and the connection is terminated.
It seems to connect fine based on the rcvd and sent commands logged in
verbose.
Please post the exact comma
Thanks for the fast reply. I understand.
I am having a problem with the socket connection. After I run pppd, I
receive a modem hangup message and the connection is terminated.
It seems to connect fine based on the rcvd and sent commands logged in
verbose.
Is there a common pppd error with the pip
Hi,
On Tuesday, May 24, 2016 04:09 AM, Ken Brown wrote:
At this point, it seems that I need a device_db.pyon for the pipistrello.
Is this database available or am I headed in the wrong direction?
Take the device_db.pyon from the examples and edit it to match the IP
address and the RTIO TTL/D
I am trying to set up a pipistrello board to run led.py .
I installed ARTIQ via conda and successfully flashed the board using the
command below
$ artiq_flash -t pipistrello -m qc1
I then setup the IP address by
pppd /dev/ttyUSB1 115200 noauth nodetach local nocrtscts novj 10.0.0.1:10.0.0.2
At