[Asterisk-Users] CallerID retain on internal transfer

2006-09-19 Thread Olivier
Hi,From http://thread.gmane.org/gmane.comp.telephony.pbx.asterisk.user/148565/focus=149455, you can read that :- SIP allows CallerID to be changed at the point when 2 separate calls are bridged to one ... - May 2006 trunk version of Asterisk did not support this behaviour at that time.Is it still t

Re: [Asterisk-Users] CallerID retain on internal transfer

2006-05-17 Thread Kevin P. Fleming
Steve Davies wrote: > In the cases previously mentioned, the user is doing an attended > transfer using the handset features, and not Asterisk. I do not know > whether SIP even allows the Caller ID to be changed at the point when > two separate calls are bridged to one... It does, but Asterisk do

Re: [Asterisk-Users] CallerID retain on internal transfer

2006-05-16 Thread Steve Davies
On 5/16/06, Avi Miller <[EMAIL PROTECTED]> wrote: Michael J. Tubby B.Sc (Hons) G8TIC wrote: > call then transfers it on to another extension transferee (recipeient) > sees the Caller*ID This behaviour changed in Asterisk 1.2 -- add "o" to your Dial options and Asterisk will retain the original C

Re: [Asterisk-Users] CallerID retain on internal transfer

2006-05-15 Thread Avi Miller
Michael J. Tubby B.Sc (Hons) G8TIC wrote: call then transfers it on to another extension transferee (recipeient) sees the Caller*ID This behaviour changed in Asterisk 1.2 -- add "o" to your Dial options and Asterisk will retain the original Caller ID on transfer. -- National Manager - Specia

Re: [Asterisk-Users] CallerID retain on internal transfer

2006-05-15 Thread C F
- Non-Commercial Discussion" Sent: Wednesday, May 10, 2006 10:52 AM Subject: Re: [Asterisk-Users] CallerID retain on internal transfer On 5/10/06, Joseph Rothstein <[EMAIL PROTECTED]> wrote: > From what I have tested, using cisco phones and 1.2.5, the original > callerID &g

Re: [Asterisk-Users] CallerID retain on internal transfer

2006-05-15 Thread Michael J. Tubby B.Sc \(Hons\) G8TIC
ttended/Blind transfers in the SIP firmware of the 7960G phone...? Mike - Original Message - From: "Steve Davies" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" Sent: Wednesday, May 10, 2006 10:52 AM Subject: Re: [Asterisk-Use

Re: [Asterisk-Users] CallerID retain on internal transfer

2006-05-10 Thread Steve Davies
On 5/10/06, Joseph Rothstein <[EMAIL PROTECTED]> wrote: From what I have tested, using cisco phones and 1.2.5, the original callerID is not kept when making a transfer. Any other ideas? We use SPA, snom and aastra phones, and I had assumed that this was a limitation of the SIP protocol. I woul

[Asterisk-Users] CallerID retain on internal transfer

2006-05-10 Thread Joseph Rothstein
>From what I have tested, using cisco phones and 1.2.5, the original callerID is not kept when making a transfer. Any other ideas? Joe ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update op

Re: [Asterisk-Users] CallerID retain on internal transfer

2006-05-08 Thread Eric \"ManxPower\" Wieling
Joe wrote: I was just looking through the Wiki for some info on how to retain the original caller's callerid when make transfers to internal extensions, and I came across the parameter below: useincomingcalleridonzaptransfer=yes There is nothing in the zapata.conf file from vers. 1.2.7 so I am

RE: [Asterisk-Users] CallerID retain on internal transfer

2006-05-07 Thread Bevan Blackie
[Asterisk-Users] CallerID retain on internal transfer I was just looking through the Wiki for some info on how to retain the original caller's callerid when make transfers to internal extensions, and I came across the parameter below: useincomingcalleridonzaptransfer=yes There is

[Asterisk-Users] CallerID retain on internal transfer

2006-05-07 Thread Joe
I was just looking through the Wiki for some info on how to retain the original caller's callerid when make transfers to internal extensions, and I came across the parameter below: useincomingcalleridonzaptransfer=yes There is nothing in the zapata.conf file from vers. 1.2.7 so I am wondering if