On Wednesday 18 August 2004 10:31, Angel Diaz wrote:
> Does anybody know is it possible to use the board TE405P with only one
> port configured as follow, or I have to use the 4 ports at the same time ?
The four ports are independent of one another with one exception: they all
share the same
You can use as many ports as you want. Just define how many ports
(spans) you're gonna use near the beginning of /etc/zaptel.conf.
span=1
Good luck
Bruno
Angel Diaz wrote:
Dear all:
Does anybody know is it possible to use the board TE405P with only
one port configured as follow, or I ha
Sorry, remove that extraneous signalling=pri_net. You should just have the
pri_cpe.
-Scott
Scott M. Stingel
President,
Emerging Voice Technology, Inc.
Palo Alto California & London England
www.evtmedia.com
No - your settings
No - your settings are not correct.
Try something like this:
ZAPTEL
#E400P (or TE410P in E1 mode) setup
#note, may need to add ,crc4 to end of span lines:
#first quad board
span=1,1,0,ccs,hdb3
span=2,0,0,ccs,hdb3
span=3,0,0,ccs,hdb3
span=4,0,0,ccs,hdb3
#first quad board
bchan=1-15,17-31
dcha
I'll need somethine like this
span=1,1,0,ccs,hdb3,crc4bchan=1-15bchan=17-31dchan=16
span=2,1,0,ccs,hdb3,crc4bchan=32-46bchan=48-62dchan=47
Setting timing source to 0 on spans could
give you some problems.. (at least I've had
them)
---
channel =