Re: [Bacula-users] Can't find the tape changer

On Wed, January 20, 2010 06:04, Dan Langille wrote: [SNIP] The prceeding shows *3* SCSI controllers: scsi0, scsi1, and scsi2. The one you want is scsi2, which is an LSI 53C1030 , according to this: >

Re: [Bacula-users] Can't find the tape changer

Henry Yen wrote: > On Tue, Jan 19, 2010 at 10:01:50AM -0500, Dan Langille wrote: >> Bugger. I get none of the above: >> >> # lsscsi -g >> -bash: lsscsi: command not found > > How about sg3_utils, then? Try: > >sg_map -i -x ]# sg_map -i -x /dev/sg0 0 0 8 0 13 DPBACKPLANE

Re: [Bacula-users] Can't find the tape changer

John BORIS wrote: > I have a PowerVault 124T. Under RHEL 5. > Attached devices: > Host: scsi0 Channel: 00 Id: 06 Lun: 00 > Vendor: SUPERModel: GEM318 Rev: 0 > Type: ProcessorANSI SCSI revision: 02 > Host: scsi0 Channel: 01 Id: 06 Lun: 00 > Vendor: S

Re: [Bacula-users] Can't find the tape changer

Alex Chekholko wrote: > On Tue, 19 Jan 2010 09:56:16 -0500 > Dan Langille wrote: > >> Henry Yen wrote: >>> On Mon, Jan 18, 2010 at 09:17:51AM -0500, Dan Langille wrote: >>> > ]# mtx -f /dev/sg6 status > mtx: Request Sense: Long Report=yes > mtx: Request Sense: Valid Residual=no >

Re: [Bacula-users] Can't find the tape changer

Hi, 19.01.2010 16:01, Dan Langille wrote: > Robert Hartzell wrote: >> On 01/18/10 07:17 PM, Dan Langille wrote: >>> Dan Langille wrote: I'm helping a client with a Linux system. I see the tape drive, but cannot find the tape changer. Clues please. From dmesg: >>> Also: >>>

Re: [Bacula-users] Can't find the tape changer

Hi, 19.01.2010 20:04, Dan Langille wrote: I see some things that I would look at more closely. See below. ... > mptctl_gettargetinfo - buffer is full but more targets are available on > ioc 0 numDevices=1 I don't know if this is an error condition, but it would be worth checking if this is nor

Re: [Bacula-users] Can't find the tape changer

Dan Langille wrote: > Fusion MPT SPI Host driver 3.12.19.00rh > ACPI: PCI Interrupt :11:08.0[A] -> GSI 16 (level, low) -> IRQ 169 > mptbase: Initiating ioc0 bringup > ioc0: 53C1030: Capabilities={Initiator,Target} > scsi2 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=169 > Vendor

Re: [Bacula-users] Can't find the tape changer

On Tue, Jan 19, 2010 at 10:01:50AM -0500, Dan Langille wrote: > Bugger. I get none of the above: > > # lsscsi -g > -bash: lsscsi: command not found How about sg3_utils, then? Try: sg_map -i -x It is in the CENTOS pools: yum install sg3_utils and is installable as static binaries. I could

Re: [Bacula-users] Can't find the tape changer

resending with cc to list: Richard Scobie wrote: > Dan Langille wrote: >> ganiuszka wrote: >>> Here is a instruction about Dell PowerVault 124T and LUNs under Linux. >>> >>> http://support.dell.com/support/edocs/stor-sys/124t/en/124tvs16/install.html#enabling_lun_linux >>> >>> >>> >>> Subject "E

Re: [Bacula-users] Can't find the tape changer

I have a PowerVault 124T. Under RHEL 5. Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: SUPERModel: GEM318 Rev: 0 Type: ProcessorANSI SCSI revision: 02 Host: scsi0 Channel: 01 Id: 06 Lun: 00 Vendor: SUPERModel: GEM318

Re: [Bacula-users] Can't find the tape changer

Dan Langille wrote: > ganiuszka wrote: >> Here is a instruction about Dell PowerVault 124T and LUNs under Linux. >> >> http://support.dell.com/support/edocs/stor-sys/124t/en/124tvs16/install.html#enabling_lun_linux >> >> Subject "Enabling LUN Support in Linux" >> >> Maybe this is the solution. > >

Re: [Bacula-users] Can't find the tape changer

On Tue, 19 Jan 2010 09:56:16 -0500 Dan Langille wrote: > Henry Yen wrote: > > On Mon, Jan 18, 2010 at 09:17:51AM -0500, Dan Langille wrote: > > > >>> ]# mtx -f /dev/sg6 status > >>> mtx: Request Sense: Long Report=yes > >>> mtx: Request Sense: Valid Residual=no > >>> mtx: Request Sense: Error Co

Re: [Bacula-users] Can't find the tape changer

ganiuszka wrote: > Here is a instruction about Dell PowerVault 124T and LUNs under Linux. > > http://support.dell.com/support/edocs/stor-sys/124t/en/124tvs16/install.html#enabling_lun_linux > > Subject "Enabling LUN Support in Linux" > > Maybe this is the solution. This is what I see now (outpu

Re: [Bacula-users] Can't find the tape changer

Here is a instruction about Dell PowerVault 124T and LUNs under Linux. http://support.dell.com/support/edocs/stor-sys/124t/en/124tvs16/install.html#enabling_lun_linux Subject "Enabling LUN Support in Linux" Maybe this is the solution. Regards. Marcin -- View this message in context: http://o

Re: [Bacula-users] Can't find the tape changer

Robert Hartzell wrote: > On 01/18/10 07:17 PM, Dan Langille wrote: >> Dan Langille wrote: >>> I'm helping a client with a Linux system. I see the tape drive, but >>> cannot find the tape changer. Clues please. >>> >>> From dmesg: >> Also: >> >> Linux version 2.6.9-78.0.8.plus.c4smp (mockbu...@b

Re: [Bacula-users] Can't find the tape changer

Henry Yen wrote: > On Mon, Jan 18, 2010 at 09:17:51AM -0500, Dan Langille wrote: > >>> ]# mtx -f /dev/sg6 status >>> mtx: Request Sense: Long Report=yes >>> mtx: Request Sense: Valid Residual=no >>> mtx: Request Sense: Error Code=0 (Unknown?!) >>> mtx: Request Sense: Sense Key=No Sense >>> mtx: Re

Re: [Bacula-users] Can't find the tape changer

> Does the failure remain after retrying after a minute or two? I've used > some changers that tended to throw errors like the above for the first > half-a-minute or so following a reset. Make that easily 5 or 10 minutes if the library somehow has to inventory its content, because a tape magazin

Re: [Bacula-users] Can't find the tape changer

On Mon, Jan 18, 2010 at 09:17:51AM -0500, Dan Langille wrote: > > ]# mtx -f /dev/sg6 status > > mtx: Request Sense: Long Report=yes > > mtx: Request Sense: Valid Residual=no > > mtx: Request Sense: Error Code=0 (Unknown?!) > > mtx: Request Sense: Sense Key=No Sense > > mtx: Request Sense: FileMark

Re: [Bacula-users] Can't find the tape changer

Dan Langille wrote: > Dan Langille wrote: > >>I'm helping a client with a Linux system. I see the tape drive, but >>cannot find the tape changer. Clues please. >> >> From dmesg: > > > Also: > > Linux version 2.6.9-78.0.8.plus.c4smp (mockbu...@builder10.centos.org) > (gcc version 3.4.6 20060

Re: [Bacula-users] Can't find the tape changer

On 01/18/10 07:17 PM, Dan Langille wrote: > Dan Langille wrote: >> I'm helping a client with a Linux system. I see the tape drive, but >> cannot find the tape changer. Clues please. >> >> From dmesg: > > Also: > > Linux version 2.6.9-78.0.8.plus.c4smp (mockbu...@builder10.centos.org) > (gcc ver

Re: [Bacula-users] Can't find the tape changer

Dan Langille wrote: > I'm helping a client with a Linux system. I see the tape drive, but > cannot find the tape changer. Clues please. > > From dmesg: Also: Linux version 2.6.9-78.0.8.plus.c4smp (mockbu...@builder10.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-10)) #1 SMP Thu Nov

Re: [Bacula-users] Can't find the tape changer

Timo Neuvonen wrote: > "Dan Langille" kirjoitti viestissä > news:4b54c50e.60...@langille.org... >> I'm helping a client with a Linux system. I see the tape drive, but >> cannot find the tape changer. Clues please. >> >> From dmesg: > >> Attached scsi generic sg5 at scsi2, channel 0, id 6, lun

Re: [Bacula-users] Can't find the tape changer

"Dan Langille" kirjoitti viestissä news:4b54c50e.60...@langille.org... > I'm helping a client with a Linux system. I see the tape drive, but > cannot find the tape changer. Clues please. > > From dmesg: > Attached scsi generic sg5 at scsi2, channel 0, id 6, lun 0, type 1 > Attached scsi gener

[Bacula-users] Can't find the tape changer

I'm helping a client with a Linux system. I see the tape drive, but cannot find the tape changer. Clues please. From dmesg: scsi2 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=169 Vendor: IBM Model: ULTRIUM-TD3 Rev: 6B20 Type: Sequential-Access