In my project I use ADC. But I try to avoid dynamic overlay loading in order to
increase boot speed.
So I move code from ADC overlay (BB-ADC-00A0.dts) to main device tree source
(am335x-boneblack.dts):
/ {
...
ocp {
/* ADC filesystem
The actual reson for the delay was the increased cost of memory
reservation, the size of which increased from 1 kb to 16 mb:
diff --git a/include/configs/ti_armv7_common.h b/include/configs/
ti_armv7_common.h
index 6982918..6e0bf09 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/c
Hi, I'm try to optimize boot time BeagleBone Black board. The forum already
has a few helpful tips to reduce boot time in stage u-boot and linux kernel
loading. But one question remains uncovered.
I found that there is a delay (near 2 sec) between the power on and the
emergance of first deb
Hi, I'm try to optimize boot time BeagleBone Black board. The forum
already has a few helpful tips to reduce boot time in stage u-boot and
linux kernel loading. But one question remains uncovered.
I found that there is a delay (near 2 sec) between the power on and the
emergance of first
Hi, I'm try to optimize boot time BeagleBone Black board. The forum
already has a few helpful tips to reduce boot time in stage u-boot and
linux kernel loading. But one question remains uncovered.
I found that there is a delay (near 2 sec) between the power on and the
emergance of first
I have tried run defferent images from SD:
1.Debian 2015-07-28 console with *u-boot v2015.01* writed to unallocated
space in front of first partition -* 2 second delay remains*
2.Jessie Snapshot console with *u-boot v2015.10* writed to unallocated
space in front of first partition -* 2 second d