Thanks Robert.
I removed the whole node and still no success :(
Le vendredi 31 mars 2017 18:50:06 UTC+2, RobertCNelson a écrit :
>
> On Fri, Mar 31, 2017 at 4:33 AM, PM
> wrote:
> > Thanks Robert ! It now compiles.
> >
> > I run make & make install. It does something
On Fri, Mar 31, 2017 at 4:33 AM, PM wrote:
> Thanks Robert ! It now compiles.
>
> I run make & make install. It does something like that :
>
> ‘src/arm/am335x-abbbi.dtb’ -> ‘/boot/dtbs/4.4.43-ti-r84/
> am335x-abbbi.dtb’
> ‘src/arm/am335x-baltos-ir2110.dtb’ ->
>
Thanks Robert ! It now compiles.
I run make & make install. It does something like that :
‘src/arm/am335x-abbbi.dtb’ -> ‘/boot/dtbs/4.4.43-ti-r84/
am335x-abbbi.dtb’
‘src/arm/am335x-baltos-ir2110.dtb’ ->
‘/boot/dtbs/4.4.43-ti-r84/am335x-baltos-ir2110.dtb’
‘src/arm/am335x-baltos-ir3220.dtb’ ->
Thanks Robert ! It now compiles.
I run make & make install. It does something like that :
‘src/arm/am335x-abbbi.dtb’ -> ‘/boot/dtbs/4.4.43-ti-r84/am335x-abbbi.dtb’
‘src/arm/am335x-baltos-ir2110.dtb’ ->
‘/boot/dtbs/4.4.43-ti-r84/am335x-baltos-ir2110.dtb’
‘src/arm/am335x-baltos-ir3220.dtb’ ->
On Thu, Mar 30, 2017 at 11:08 AM, PM wrote:
> Hello :)
>
> I tried to compile the dtb-4.9 but I get these errors, do you have any idea
> ?
>
> debian@arm:/opt/source/dtb-4.9-ti$ sudo make
> DTC src/arm/am335x-boneblack-bbb-exp-r.dtb
> FATAL ERROR: Unrecognized
Hello :)
I tried to compile the dtb-4.9 but I get these errors, do you have any idea
?
debian@arm:/opt/source/dtb-4.9-ti$ sudo make
DTC src/arm/am335x-boneblack-bbb-exp-r.dtb
FATAL ERROR: Unrecognized check name "unit_address_vs_reg"
Makefile:136: recipe for target
Okay I found the dtsi file in /opt/source/dtb-4.9-ti/src/arm/ :)
Do I have to recompile it after editing the file ?
If Yes, what command should i type ?
Thanks :)
Le lundi 27 mars 2017 18:04:04 UTC+2, PM a écrit :
>
> Thanks for the info.
>
> I tried to find the corresponding dtb to modify
Thanks for the info.
I tried to find the corresponding dtb to modify but no success :(
I can't find any am335x-bone-common.dtb. Do you know where should I look ?
Regards,
PM
Le lundi 27 mars 2017 15:14:37 UTC+2, Jason Kridner a écrit :
>
>
>
> On Mar 27, 2017, at 8:47 AM, Gerald Coley
> On Mar 27, 2017, at 8:47 AM, Gerald Coley wrote:
>
> Reset pin goes to the reset line and the power button goes to the PMIC. PMIC
> pins and reset lines are not controlled via the DTS file
The interrupt into software for the power button is dts controlled:
Reset pin goes to the reset line and the power button goes to the PMIC.
PMIC pins and reset lines are not controlled via the DTS file
On Mon, Mar 27, 2017 at 5:02 AM, PM wrote:
> Hello everybody,
>
> I am trying to disable my reset & poweroff button from my LCD7
Hello everybody,
I am trying to disable my reset & poweroff button from my LCD7 cape.
I saw on the schematic diagram that these buttons are directly connected to
SYS_RESET & PWR_BUT.
I would like to know if it is possible to disable these buttons by editing
any 'dts' or 'dtso' file ?
Thank
11 matches
Mail list logo