this was spot on
Thanks for the tip of leaving out CANbus on the google search.
Op woensdag 16 januari 2019 16:36:55 UTC+1 schreef Tarmo Kuuse:
>
> Hi Gwen,
>
> On Wednesday, 16 January 2019 12:35:09 UTC+2, Gwen Stouthuysen wrote:
>>
>> Is there a method of using these commands at boot so that the
Hi Gwen,
On Wednesday, 16 January 2019 12:35:09 UTC+2, Gwen Stouthuysen wrote:
>
> Is there a method of using these commands at boot so that the CAN
> interface is available?
>
> config-pin P1_28 can# rx
> config-pin P1_26 can# tx
>
> I have trouble to find the necessary information on ho
Is there a method of using these commands at boot so that the CAN interface
is available?
config-pin P1_28 can# rx
config-pin P1_26 can# tx
I have trouble to find the necessary information on how to create a CANbus
related overlay. But in fact I only need these two commands to execute a
On Sun, Jan 7, 2018 at 5:36 AM, wrote:
> Hello Folks!
>
> We are currently experimenting with the PocketBeagle CAN Connection but
> haven't got much success yet. The PocketBeagle will be connected to a car.
> To accomplish this we use a CAN Board
> (https://www.waveshare.com/sn65hvd230-can-board.
Hello Folks!
We are currently experimenting with the *PocketBeagle CAN Connection* but
haven't got much success yet. The PocketBeagle will be connected to a car.
To accomplish this we use a CAN Board
(https://www.waveshare.com/sn65hvd230-can-board.htm) in connection with a
step down converter