Try this-
tinker panic 0
server 192.168.187.11 minpoll 4 maxpoll 4
driftfile C:\WINNT\system32\drivers\etc\ntp.drift # path for drift file
If you are syncing your sub to this pub, you may also want to add-
tinker panic 0
server 192.168.187.11 minpoll 4 maxpoll 4
server 127.127.1.1
What you can try is assign a dummy AC pilot point to the original AC
Pilot Point as the 'Always Route Member' creating a linked hunt group.
Then for this second dummy AC pilot point assign a dummy AC user like
you did w/ the first. But instead, disable queuing for this second
dummy Pilot Point. Aft
Thanks for the clarification.
On Wed, Jan 14, 2009 at 12:49 PM, Vik Malhi wrote:
> TS is required in both scenarios is the answer to your question. And it
> would be VERY unlikely that you would be asked to configure LFI without LLQ
> (in my humble opinion).
>
>
> --
> Vik Malhi – CCIE #13890, CC
On a FA port w/ a 1q4t rx port type, I noticed that 'set port qos x/y
trust trust-cos' is needed to enable the rx drop thresholds.
hq-sw (enable) show qos info run 4/25
...
Queue and Threshold Mapping for 1q4t (rx):
All packets are mapped to a single queue.
Rx drop thresholds:
Rx drop thresholds a
