Thanks!
Marc
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Kyle Owen via
cctalk
Sent: Wednesday, December 12, 2018 8:47 PM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Documation card readers for sale
On Wed, Dec 12, 2018 at 6
On Wed, Dec 12, 2018 at 6:50 PM Curious Marc via cctalk <
cctalk@classiccmp.org> wrote:
> Interested in the Arduino interface too. Will save me some time. Has it
> been posted anywhere?
>
> Marc
>
Sorry it took me a while to get it. Here's the program, ca. 17 January 2015.
https://pastebin.com/u
ssiccmp.org"
Subject: Re: Documation card readers for sale
On Wed, Jun 17, 2015 at 7:24 PM Kyle Owen wrote:
If anyone here does get one, I've got a simple Arduino UNO program that
interfaces to the parallel output and sends fully decoded information over
USB at quite high speeds.
I think I have the M8291, and maybe a M843 and a cable somewhere.
Paul
On Mon, Dec 10, 2018 at 10:05 PM Ethan Dicks via cctalk <
cctalk@classiccmp.org> wrote:
> On Mon, Dec 10, 2018 at 6:23 PM William Donzelli
> wrote:
> > > I would love to read Cardamation docs, especially anything relating to
On Mon, Dec 10, 2018 at 6:23 PM William Donzelli wrote:
> > I would love to read Cardamation docs, especially anything relating to
> > setting up a modem or a local computer with the serial port
> > requirements. Anyone have any?
>
> You have forgotten that I am the one that cleaned out Cardamati
You have forgotten that I am the one that cleaned out Cardamation...
--
Will
On Mon, Dec 10, 2018 at 1:02 PM Ethan Dicks via cctalk
wrote:
>
> On Mon, Dec 10, 2018 at 10:20 AM Ethan Dicks wrote:
> > The interesting thing about my M-200 is it has a factory mod...
>
> A little clarification of thi
On Mon, Dec 10, 2018 at 10:20 AM Ethan Dicks wrote:
> The interesting thing about my M-200 is it has a factory mod...
A little clarification of this after more reading. My card reader
appears to be an M-600, with an internal Cardamation serial interface
("Feature 92"). I haven't found much in
On Wed, Jun 17, 2015 at 7:24 PM Kyle Owen wrote:
> If anyone here does get one, I've got a simple Arduino UNO program that
> interfaces to the parallel output and sends fully decoded information over
> USB at quite high speeds.
I'm interested in that! I was designing one in my head this weekend.
> On Jun 18, 2015, at 17:02 , John Ball wrote:
>
> Just a heads up that both units are now pending a sale. If one or either
> completely fall through I'll bump this back up here on the list. Thanks to
> all who inquired.
Yay!
--
Mark J. Blair, NF6X
http://www.nf6x.net/
Just a heads up that both units are now pending a sale. If one or either
completely fall through I'll bump this back up here on the list. Thanks to
all who inquired.
-John
>
> That bloody EDAC connector is not cheap. I ended up sourcing one for like
> $60. On the other hand you can hunt around for scrap 50 conductor telco
No, but it is still available (easily) and it is very well made. Or at least
the ones I
have used are. The back shells are designed so you can f
Oh butts I sent that before I proofread.
I'm in the Pacific Northwest, about three or four hours east of Vancouver
BC. I have access to freight services should you take that route but for
your wallet I'd strongly recommend some sort of local or negotiated pickup.
;0
>>Are the readers in question t
Although, I suppose that could change if I win the lottery tonight, retire, and
buy a camper. :)
--
Mark J. Blair, NF6X
http://www.nf6x.net/
> On Jun 17, 2015, at 19:48, Chris Osborn wrote:
>
>
> On Jun 17, 2015, at 7:43 PM, Mark J. Blair wrote:
>
>> Are the readers in question these ones in Canada?
>
> When you drive up there to get them, you can stop by my house on your way
> home and drop one off. I’m in Sacramento so I’m rig
On Jun 17, 2015, at 7:43 PM, Mark J. Blair wrote:
> Are the readers in question these ones in Canada?
When you drive up there to get them, you can stop by my house on your way home
and drop one off. I’m in Sacramento so I’m right on the way. I’ll let you play
some air hockey while you’re here
> On Jun 17, 2015, at 16:14, John Ball wrote:
>
> About six months ago I struck a deal with a place down in California for
> four Documation M1000's that I've been able to tell so far they all work but
> I really don't have space for more than one. I've been trying to sell them
> at a loss for m
ok the m 200 and 600? tend to have gooey rollers... thus the reason
I ask...
In a message dated 6/17/2015 7:27:16 P.M. US Mountain Standard Time,
mloe...@cpumagic.scol.pa.us writes:
I haven't replaced the rubber rollers on my M1000, yet. They're still
in good shape.
On Wed, 17
I haven't replaced the rubber rollers on my M1000, yet. They're still
in good shape.
On Wed, 17 Jun 2015, couryho...@aol.com wrote:
Mike where did you get new rubber roller things for the card
reader?
Thanks for the link on theinterface. Ed# _www.smecc.org_
(http://ww
Mike where did you get new rubber roller things for the card
reader?
Thanks for the link on theinterface. Ed# _www.smecc.org_
(http://www.smecc.org)
In a message dated 6/17/2015 7:21:15 P.M. US Mountain Standard Time,
mloe...@cpumagic.scol.pa.us writes:
On Wed, 17 J
On Wed, 17 Jun 2015, Kyle Owen wrote:
On Wed, Jun 17, 2015 at 7:14 PM, John Ball wrote:
About six months ago I struck a deal with a place down in California for
four Documation M1000's that I've been able to tell so far they all work
but
I really don't have space for more than one.
If anyo
On Wed, Jun 17, 2015 at 7:14 PM, John Ball wrote:
> About six months ago I struck a deal with a place down in California for
> four Documation M1000's that I've been able to tell so far they all work
> but
> I really don't have space for more than one.
If anyone here does get one, I've got a si
> On Jun 17, 2015, at 16:14 , John Ball wrote:
>
> About six months ago I struck a deal with a place down in California for
> four Documation M1000's that I've been able to tell so far they all work but
> I really don't have space for more than one. I've been trying to sell them
> at a loss for
22 matches
Mail list logo
