...@ifastnet.com
Cc: Ceph Users
Subject: Re: [ceph-users] RADOSGW err=Input/output error
Hi :
I use libs3 to run test . The network is IB.
The error in libcurl is the following:
== Info: Operation too slow. Less than 1 bytes/sec transferred the last 15
seconds
== Info: Closing connection 766
th
>
> debug ms = 1
> debug rgw = 20
>
> Regards
> Kev
>
>
> - Original Message -
> From: "Drew Weaver"
> To: "ceph-users"
> Sent: Tuesday, July 3, 2018 1:39:55 PM
> Subject: [ceph-users] RADOSGW err=Input/output error
>
> An
Hi Drew,
Try to increase debugging with
debug ms = 1
debug rgw = 20
Regards
Kev
- Original Message -
From: "Drew Weaver"
To: "ceph-users"
Sent: Tuesday, July 3, 2018 1:39:55 PM
Subject: [ceph-users] RADOSGW err=Input/output error
An application is having gene
An application is having general failures writing to a test cluster we have
setup.
2018-07-02 23:13:26.128282 7fe00b560700 0 WARNING: set_req_state_err err_no=5
resorting to 500
2018-07-02 23:13:26.128460 7fe00b560700 1 == req done req=0x7fe00b55a110
op status=-5 http_status=500 ==
20