dear all:
can you tell me which ios feature must have suppport the
NM-HDV&VWIC-1MFT-E1 on router cisco2610.
thanks
--
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=34815&t=34815
--
FAQ, list archives, and subscription i
--
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=38631&t=38631
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CAN C6K ACT AS THE PE DEVICES
--
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=38749&t=38749
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violation
show control
""george gittins"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> which is the command that will show the type of cable attached to the
> interface?
> so i can know if its dce or dte
>
> George Gittins
> Internet Systems Manager
> Weslaco, Tx 78599
> Phone (956)96965
engine from the chasis .good luck to you!
wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> This is the first question I have posted, I appreciate any ideas or
> suggestions
> you can provide.
>
> We are following the steps outlined at:
> http://www.cisco.com/warp/public/473/81.shtm
when you upgrade the master supervisor you must remove the secondry
superviso
from the chasis . when you have upgraded the master supervisor ,you must
remove the master from the chasis .then upgrade the secondary .thats all
wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> This is
show control
""george gittins"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> which is the command that will show the type of cable attached to the
> interface?
> so i can know if its dce or dte
>
> George Gittins
> Internet Systems Manager
> Weslaco, Tx 78599
> Phone (956)96965
super engine.
good luck you!
wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> This is the first question I have posted, I appreciate any ideas or
> suggestions
> you can provide.
>
> We are following the steps outlined at:
> http://www.cisco.com/warp/public/473/81.shtml
> to do t
RFC 2547.
""thinkworker"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Why we need BGP to establish MPLS?
>
> Now we had to use IGP and IBGP to set up MPLS in a AS. It seems quite
> not necessary.
>
> Can anyone help?
Message Posted at:
http://www.groupstudy.com/form/read.
dear all :
when i have a test .the router with the dce cable must suppy the clock
rate ,that's sure ?
wish you help ?
--
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=33545&t=33545
--
FAQ, list archives, and subscription
10 matches
Mail list logo