Try using the switch command: show mac
you should get an output similar to this:
switch_named#sh mac
Dynamic Address Count: 215
Secure Address Count: 0
Static Address (User-defined) Count: 0
System Self Address Count: 47
Total MAC addresses:
Start at your core and work your way out. For example, if you have a core
switch connected to other switches at the distribution or accesss layers via
trunks, do a show mac-address-table (or show cam dynamic for CatOS switches)
and see which trunk port it is coming from. Then go to the next switc
On a 2900XL it is
sh mac-address-table address ... Result should show destination
port. Be aware if other switches are connected to that port.
> -Original Message-
> From: David Ristau [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, March 18, 2003 10:52 AM
> To: [EMAIL PROTECTED]
>
For Catalyst (set) IOS use show cam dynamic. You can add a vlan argument if
you have multiple vlans and know which one your mac addr is on.
At 07:14 PM 3/18/03 GMT, you wrote:
>On a 2900XL it is
>sh mac-address-table address ... Result should show destination
>port. Be aware if other
Or this command
show mac-address-table address .. (zeros being the mac
address you are looking for.)
Cheers
-Original Message-
From: Angel Leiva [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 18, 2003 8:31 PM
To: [EMAIL PROTECTED]
Subject: RE: Finding device on network via
5 matches
Mail list logo