-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
|> | What units is this in? - I get a slightly varying "505500"
|>
|> uA... that's a lot of power you're sucking there? Normally Freerunner
|> is around 190mA with backlight on full or 90mA idle with backlig
Something wasnt right - the next resume X didnt come back leaving a
console display without any means of data entry. Required the battery
to be removed to reboot it. And it was ~1hr when I discovered it and
the battery had lost 30% in that time - was down to 4% :)
Now its drawing ~166000 when I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| On Wed, 2008-08-06 at 18:20 +0300, Timo Juhani Lindfors wrote:
|> Hi,
|>
|> kazaam <[EMAIL PROTECTED]> writes:
|>> There's some symbol in the try looking a bit like a black battery
|>> with a lightning symbo
On Wed, 2008-08-06 at 18:20 +0300, Timo Juhani Lindfors wrote:
> Hi,
>
> kazaam <[EMAIL PROTECTED]> writes:
> > There's some symbol in the try looking a bit like a black battery
> > with a lightning symbol in it. Is this meaning it's loading? And
> > where do I see how full it is? I tried acpi -v
The last few percent always take longer to charge than the first 80.
This is true of every battery I'm familiar with.
The other thing to keep in mind is, how is it estimating that hour?
I'm sure it's basing it on the current charge rate, which is going to
be lower if you're at the terminal on the
Brian Wilson schrieb:
>
> I guess what I am saying is that I'd like to know what the sysfs
> numbers mean -- why did ASU think the battery was dead when the sysfs
> said "91"? I will try cat /proc/apm tonight but knowing how to
> interpret it would be good too
when i type "apm -v" i get a realy c
Yesterday when I was running ASU and had had the FR plugged in
overnight to its charger I looked at its screen and there was a popup
window was saying "your battery is really low, better recharge it
soon" (I paraphrase). I figured it was wrong. Since I was about to
reflash it with FSO I checked th
Have a look at this:
http://freeyourphone.de/portal_v1/viewtopic.php?f=5&t=297&st=0&sk=t&sd=a&hilit=battery&start=15#p3525
(German Freeyourphone-Forum)
You can download the ipk-Package in this thread.
--
Tobias
On Wednesday 06 August 2008 17:05:08 kazaam wrote:
> Hi,
> I have a Freerunner and
On Wed, 06 Aug 2008 11:10:22 -0400
Joe DiTommasso <[EMAIL PROTECTED]> wrote:
> 'cat /proc/apm' in the terminal will show you the current charge level,
> as well as the time to full charge or full discharge, depending on
> whether the device is plugged in or not.
This shows me:
# cat /proc/apm
Hi,
kazaam <[EMAIL PROTECTED]> writes:
> There's some symbol in the try looking a bit like a black battery
> with a lightning symbol in it. Is this meaning it's loading? And
> where do I see how full it is? I tried acpi -v in the terminal but
> it seems openmoko is running without acpi.
Try "apm"
'cat /proc/apm' in the terminal will show you the current charge level,
as well as the time to full charge or full discharge, depending on
whether the device is plugged in or not.
kazaam wrote:
> Hi,
> I have a Freerunner and I'm told to fully load it for the first time. But
> where can I check
Hi,
I have a Freerunner and I'm told to fully load it for the first time. But where
can I check how full my battery is at the time? And where if it is loading at
all?
There's some symbol in the try looking a bit like a black battery with a
lightning symbol in it. Is this meaning it's loading? A
12 matches
Mail list logo