On 9/15/2013 1:36 PM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/iselect/64/iselect/iselect-1.4.0-2-src.tar.bz2
\
http://cante.net/~jaalto/tmp/cygwin/iselect/64/iselect/iselect-1.4.0-2.tar.bz2 \
http://cante.net/~j
On 9/15/2013 1:52 PM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/lcab/64/lcab/lcab-1.0b12-1-src.tar.bz2
\
http://cante.net/~jaalto/tmp/cygwin/lcab/64/lcab/lcab-1.0b12-1.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/l
On 9/15/2013 1:58 PM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/links/64/links/links-2.7-1-src.tar.bz2
\
http://cante.net/~jaalto/tmp/cygwin/links/64/links/links-2.7-1.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/l
On 9/15/2013 2:03 PM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/lv/64/lv/lv-4.51-2-src.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/lv/64/lv/lv-4.51-2.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/lv/64/lv/setup.hin
On 9/15/2013 2:08 PM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/lzop/64/lzop/lzop-1.03-1-src.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/lzop/64/lzop/lzop-1.03-1.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/lzop/6
On 9/15/2013 2:48 PM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/mairix/64/mairix/mairix-0.22-1-src.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/mairix/64/mairix/mairix-0.22-1.tar.bz2
\
http://cante.net/~jaalto/tmp
On 9/15/2013 3:03 PM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/makepasswd/64/makepasswd/makepasswd-1.10-2-src.tar.bz2
\
http://cante.net/~jaalto/tmp/cygwin/makepasswd/64/makepasswd/makepasswd-1.10-2.tar.bz2
\
ht
On 9/15/2013 3:11 PM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/mboxcheck/64/mboxcheck/mboxcheck-0.1.2-2-src.tar.bz2
\
http://cante.net/~jaalto/tmp/cygwin/mboxcheck/64/mboxcheck/mboxcheck-0.1.2-2.tar.bz2
\
http:/
On 9/15/2013 3:14 PM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/micro-httpd/64/micro-httpd/micro-httpd-20051212-1-src.tar.bz2
\
http://cante.net/~jaalto/tmp/cygwin/micro-httpd/64/micro-httpd/micro-httpd-20051212-1.tar.
On 9/15/2013 3:18 PM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/mmv/64/mmv/mmv-1.01b-1-src.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/mmv/64/mmv/mmv-1.01b-1.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/mmv/64/mmv
On 9/15/2013 3:27 PM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/nrss/64/nrss/nrss-0.3.9-2-src.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/nrss/64/nrss/nrss-0.3.9-2.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/nrss
On 9/15/2013 3:33 PM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/nttcp/64/nttcp/nttcp-1.47-2-src.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/nttcp/64/nttcp/nttcp-1.47-2.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin
On 9/16/2013 12:14 AM, Jari Aalto wrote:
POSIX shell, upload to 64:
wget \
http://cante.net/~jaalto/tmp/cygwin/oodiff/oodiff-20080328-1-src.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/oodiff/oodiff-20080328-1.tar.bz2 \
http://cante.net/~jaalto/tmp/cygwin/oodiff/oodiff-20080328.
On 9/16/2013 12:18 AM, Jari Aalto wrote:
wget \
Please fix your wget command for future RFUs.
http://cante.net/~jaalto/tmp/cygwin/optipng/64/optipng/optipng-0.7.4-1-src.tar.bz2
\
http://cante.net/~jaalto/tmp/cygwin/optipng/64/optipng/optipng-0.7.4-1.tar.bz2 \
Uploaded.
On 9/16/2013 12:39 AM, Jari Aalto wrote:
2013-09-16 07:25 Jari Aalto
| wget \
| ...
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/outguess/64/outguess/outguess-0.2-1-src.tar.bz2
\
http://cante.net/~jaalto/tmp/cygwin/outguess/64/outgues
On 9/16/2013 12:36 AM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/pngcheck/64/pngcheck/pngcheck-2.3.0-1-src.tar.bz2
\
http://cante.net/~jaalto/tmp/cygwin/pngcheck/64/pngcheck/pngcheck-2.3.0-1.tar.bz2
\
Uploaded.
On 9/20/2013 10:16 AM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/pngcrush/64/pngcrush/pngcrush-1.7.67+20130820+giteca9f84-1-src.tar.bz2
\
http://cante.net/~jaalto/tmp/cygwin/pngcrush/64/pngcrush/pngcrush-1.7.67+2013082
On 9/20/2013 10:52 AM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/pngquant/64/pngquant/pngquant-2.0.20130820+git1e28372-1-src.tar.bz2
\
http://cante.net/~jaalto/tmp/cygwin/pngquant/64/pngquant/pngquant-2.0.20130820+git1
On 9/20/2013 10:51 AM, Jari Aalto wrote:
wget --recursive --no-host-directories --cut-dirs=3 \
http://cante.net/~jaalto/tmp/cygwin/pngquant/pngquant-2.0.20130820+git1e28372-1-src.tar.bz2
\
http://cante.net/~jaalto/tmp/cygwin/pngquant/pngquant-2.0.20130820+git1e28372-1.tar.bz2
\
On 9/22/2013 12:32 PM, Jari Aalto wrote:
2013-09-22 15:42 "Dr. Volker Zell"
|
| You should probably bump the version number to 1.28-2
wget --recursive --no-host-directories --cut-dirs=3 \
http://cante.net/~jaalto/tmp/cygwin/pristine-tar/pristine-tar-1.28-2-src.tar.bz2
\
http://cante
On 9/20/2013 10:07 AM, Jari Aalto wrote:
2013-09-19 10:52 "Dr. Volker Zell" :
|
| man page is still under /usr/man/man1 insted of /usr/share/man/man1.
Update:
wget --recursive --no-host-directories --cut-dirs=3 \
http://cante.net/~jaalto/tmp/cygwin/bzr/bzr-2.6.0-2-src.tar.bz2 \
http:/
On 10/11/2013 11:08 AM, Jari Aalto wrote:
2013-10-11 12:21 "Dr. Volker Zell" :
|
| man page is under /usr/man instead of /usr/share/man
Fixed, thanks:
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/fdupes/64/fdupes/fdupes-1.50-PR2-3-src.tar.bz2
On 10/12/2013 1:32 AM, Jari Aalto wrote:
2013-10-11 12:21 "Dr. Volker Zell" :
|
| [bzr-2.6.0-1] man page is under /usr/man instead of /usr/share/man
Update, thanks.
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/bzr/64/bzr/bzr-2.6.0-2-src.tar.bz2
On 10/12/2013 1:47 AM, Jari Aalto wrote:
2013-10-11 12:21 "Dr. Volker Zell" :
|
| [optipng-0.7.4-1] man page is under /usr/man instead of /usr/share/man
Update, thanks.
wget --recursive --no-host-directories --cut-dirs=5 \
http://cante.net/~jaalto/tmp/cygwin/optipng/64/optipng/optipng-0.7
Name: Ken Brown
Package: emacs
SSHkey: ssh-rsa
B3NzaC1yc2EBIwAAAIEArzqIngoQSw9E3YyHhQH4FfINgDkQrtLlAIs9/sX+tWB6V9iTeiF2Onz/fLQABPSj1fIuPR6k85McMEYVAasURqMUltRtpHdXVNn75Q9n5Ksk3WlX80F1W1iniOXDIi5INJlH7gwfuRqrnsgM9bvwJdS+Ci/NboCMHbzGN79ccSc=
kbrown
On 11/30/2013 3:47 AM, Andrew Schulman wrote:
On Fri, Nov 29, 2013 at 10:06:50PM -0500, Christopher Faylor wrote:
On Fri, Nov 29, 2013 at 01:13:30PM -0500, Christopher Faylor wrote:
I added you as the owner for "unison" and "unison2.45".
Which didn't do anything. I'm investigating why now.
On 12/13/2013 4:19 AM, Jari Aalto wrote:
Hi,
I tried to follow the example in
https://sourceware.org/cygwin-apps/package-upload.html
and got this:
$ lftp sftp://cygwin:(at)cygwin
lftp cygwin(at)cygwin:~> ls
ls: Login failed: Login incorrect
Try "lftp sftp://cygwin AT cy
On 2/6/2014 7:43 PM, Yaakov (Cygwin/X) wrote:
Ken,
During the x86_64 porting process, we added a large number of Perl
modules to the distro rather quickly, but we never updated
cygwin-pkg-maint.
AFAICS these are yours, as dependencies of biber:
perl-Business-ISBN
perl-Business-ISBN-DATA
I know there has been a change in cygport so that by default, .la files
are no longer shipped. But the .la files for fontconfig, expat, and
freetype are needed for the Cygwin build of xetex.exe for the native TeX
Live distribution. This is a static build. (Native TeX Live uses
static builds
On 2/17/2014 3:25 PM, Yaakov (Cygwin/X) wrote:
On 2014-02-17 13:28, Ken Brown wrote:
I know there has been a change in cygport so that by default, .la files
are no longer shipped. But the .la files for fontconfig, expat, and
freetype are needed for the Cygwin build of xetex.exe for the native
On 2/17/2014 8:55 PM, Yaakov (Cygwin/X) wrote:
On 2014-02-17 16:44, Ken Brown wrote:
On 2/17/2014 3:25 PM, Yaakov (Cygwin/X) wrote:
On 2014-02-17 13:28, Ken Brown wrote:
If not, can the .la files for those three libraries be added to the
x86_64 distro?
That's clearly not necessary.
Reini,
This is a followup to
http://cygwin.com/ml/cygwin-apps/2013-06/msg00152.html
Are you planning a perl update in the near future? I'm starting to work
on TeX Live 2014, and it would be nice to be able to include the current
version of biber (and biblatex). With perl-5.14, I have to s
I've just started experimenting with using cygport for cross compiling,
and I've come across two issues:
1. This is just a request: The latest cygport for Fedora appends i686 or
x86_64 to the name of the working directory. I would find it convenient
if cygport did the same thing on Cygwin, at
On 3/19/2014 2:28 PM, Corinna Vinschen wrote:
On Mar 19 13:04, Yaakov (Cygwin/X) wrote:
On 2014-03-19 11:32, Ken Brown wrote:
I've just started experimenting with using cygport for cross compiling,
and I've come across two issues:
1. This is just a request: The latest cygport
On 3/19/2014 2:04 PM, Yaakov (Cygwin/X) wrote:
On 2014-03-19 11:32, Ken Brown wrote:
2. I tried to do a build for x86-cygwin on x86_64-cygwin, but the
compiler didn't work:
$ cat test.c
int
main ()
{
return 0;
}
$ i686-pc-cygwin-gcc test.c
/tmp/ccaAaoj6.s: Assembler messages:
/tmp/cca
On 3/27/2014 4:01 PM, Achim Gratz wrote:
Yaakov (Cygwin/X) writes:
Actually, that is experimental code (based on a request from another
cygport user) that was accidentally shipped when I had to reroll the
source tarball for compatibility with F20/UnversionedDocDirs. Would
people like to see thi
Yaakov,
There is a problem with having fontconfig include the Windows Fonts
directory in /etc/fonts/fonts.conf. Namely, the font cache for that
directory is very likely to be out of date [*], but most users have no
idea that they need to run fc-cache to keep it up to date. This can
cause sl
On 4/25/2014 10:30 AM, Jon TURNEY wrote:
On 17/06/2009 23:22, Jon TURNEY wrote:
Sorry for not mentioning this before you did the packaging, but can I
suggest that emacs-X11 package setup.hint should have font-adobe-dpi75
and font-misc-misc added to the requires: line
I believe this will ensure
On 4/27/2014 10:34 PM, Yaakov (Cygwin/X) wrote:
On 2014-04-24 15:42, Jon TURNEY wrote:
From a previous discussion [1] on this subject, it seems to be that
if this is
desirable, then source packages should be fixed rather than working
around
this in setup.
Attached is a patch to cygport to do e
On 5/2/2014 4:21 AM, Achim Gratz wrote:
Reini Urban writes:
It's vastly easier to keep perl_vendor than to split it up.
I've been looking at the test package for the upcoming 5.18.2 release
announced in http://cygwin.com/ml/cygwin-announce/2014-04/msg00038.html
and I'd like to contest that ass
perl-capture-tiny Ken Brown
perl-clone Yaakov Selkowitz
perl-data-compare Ken Brown
perl-date-simpleKen Brown
perl-digest-hmacYaakov Selkowitz
perl-encode-locale Yaakov Selkowitz
perl-file-find-rule
I'm attaching texlive_arch.patch and texlive_install.patch. The first
takes account of the fact that upstream TeX Live now supports 64-bit
Cygwin. The second avoids installing files that are intended for TeX
Live on native Windows.
Ken
--- texlive.cygclass.orig 2014-03-09 09:20:11.
Yaakov,
Occasionally there are changes to TeX Live that require postinstall
steps that should be done before any texlive-collection-* postinstall
scripts are run. See [1] below for an example. Since I have no control
over which postinstall script is run first, I propose the following:
1. t
On 6/11/2014 10:54 AM, Ken Brown wrote:
#! /bin/bash
for f in /etc/texmf/postinstall/*.sh
do
/bin/bash.exe --norc --noprofile /etc/texmf/postinstall/${f}
mv /etc/texmf/postinstall/${f} /etc/texmf/postinstall/${f}.done
done
This isn't quite right, but you know what I meant.
Ken
On 6/13/2014 4:02 PM, cygwin-no-re...@cygwin.com wrote:
upset: Error. Parsing failed. - duplicate packages "tig" detected -
x86/release/tig vs. /var/ftp/pub/cygwin/x86/release/git/tig
Jari, here's another one that needs your attention.
Ken
Yaakov,
I will be ready to release TeX Live 2014 within the next week or so.
Could you update fontconfig so that /etc/fonts/fonts.conf contains the
TeX Live fonts directories? (See
https://cygwin.com/ml/cygwin-xfree/2014-05/msg00020.html)
Thanks.
Ken
On 6/11/2014 10:54 AM, Ken Brown wrote:
Yaakov,
Occasionally there are changes to TeX Live that require postinstall
steps that should be done before any texlive-collection-* postinstall
scripts are run. See [1] below for an example. Since I have no control
over which postinstall script is run
On 8/25/2014 2:58 PM, D. Boland wrote:
Hi Achim,
Achim Gratz wrote:
D. Boland writes:
It's waiting for upload at:
http://cygwin.boland.nl/x86/release/libfakesu/
cygmake install PREFIX=${D}/usr
You wouldn't need to do this if your Makefile was using $(DESTDIR) for
supporting staged buil
# x86:
D=http://sanibeltranquility.com/cygwin/x86/release/texinfo
wget -x -nH --cut-dirs=3 \
${D}/setup.hint \
${D}/texinfo-5.2-2.tar.xz \
${D}/texinfo-5.2-2-src.tar.xz \
${D}/texinfo-debuginfo/setup.hint \
${D}/texinfo-debuginfo/texinfo-debuginfo-5.2-2.tar.xz
# x86_64:
D=http://sanibel
I've started using here documents in my .cygport files to create
postinstall scripts when necessary. But then cygport creates an
unnecessary .cygwin.patch file. I can prevent that with
cp -R ${C} ${S}/../../origsrc/${SRC_DIR}
Is there a better way to deal with this situation? Or should cy
On 9/30/2014 3:51 PM, Achim Gratz wrote:
Ken Brown writes:
I've started using here documents in my .cygport files to create
postinstall scripts when necessary. But then cygport creates an
unnecessary .cygwin.patch file. I can prevent that with
cp -R ${C} ${S}/../../origsrc/${SRC_DIR
On 8/16/2014 3:04 AM, Achim Gratz wrote:
Yaakov Selkowitz writes:
Thanks for the reminder. Where did we leave off wrt breaking out
perl_vendor?
I've offered a practical way to do this for everyone to test on a 32bit
install. If that works and is agreeable, I've also offered to ITA/ITP
the pa
On 10/29/2014 9:42 AM, Yaakov Selkowitz wrote:
Please find attached a list of old package tarballs which are not listed
anywhere in setup.ini, meaning that they are not listed as a previous, current,
or test package, and cannot be installed with setup. These files consume a
total of over 1.3Gib.
On 10/30/2014 12:58 PM, Achim Gratz wrote:
Reini Urban writes:
This way was not practical. You cannot ensure a proper rebased initial
set this way, hence 32bit rebase error will be more likely.
I didn't make progress in the autorebaser for cpan installs.
I have a working incremental autorebase
On 11/10/2014 1:31 PM, Achim Gratz wrote:
Two minor nits:
The current beta packages contain a "." in the release number. That dot is
chopped off along with the anything that follows in some places during
install in setup.exe. A better naming scheme would use a letter there,
so perhaps "0b8" (
On 11/4/2014 11:25 AM, Achim Gratz wrote:
Ken Brown writes:
I think Reini is talking about the changes introduced by Yaakov and
subsequently followed by others (including me). But as long as you're
getting the credit anyway, are you willing to adopt perl? We seem to
be at an impasse othe
On 11/16/2014 8:45 AM, Achim Gratz wrote:
As discussed on the main list, here's the incremental autorebase package
as well as the patched setup.exe to implement perpetual postinstall
scripts.
$cygwin=http://cygwin.stromeko.net/
wget $cygwin/noarch/release/_incautorebase/_incautorebase-6-1.t
On 11/16/2014 11:20 AM, Achim Gratz wrote:
Ken Brown writes:
Would it be very hard to allow perpetual postinstall scripts to run
either before or after all others?
Not any harder than what is already there. ALthough if we are going to
create even more strata of postinstall phases I'd op
On 11/16/2014 1:17 PM, Achim Gratz wrote:
Ken Brown writes:
It might not be the best solution long term, but I could achieve
substantial improvement without a great deal of effort. See
http://tug.org/pipermail/tlbuild/2014q4/003072.html
for an indication of what I'd like to do.
On 11/17/2014 6:54 AM, szgyg wrote:
Ken Brown, 2014.11.17. 12:00 :
What I have in mind is simpler than this. There's nothing wrong with
the existing texlive postinstall scripts except slowness, due to the
repetition of time-consuming commands in different scripts. So I just
need to do
On 11/20/2014 1:57 PM, Achim Gratz wrote:
I've had the impression that Corinna wanted to get something _now_ (and
Ken too, most likely).
I think it would be great if we could quickly get something in place that allows
for perpetual pre/post postinstall scripts. That would already let us make
On 11/23/2014 3:17 PM, Achim Gratz wrote:
In my attempt to implement post-postinstall scripts for Ken to use for
TeXlive it turned out that the same hack I used for the pre-postinstall
perpetual scripts wouldn't really work. So I've implemented the
stratified postinstall already, at the moment
On 11/24/2014 3:19 PM, Ken Brown wrote:
On 11/23/2014 3:17 PM, Achim Gratz wrote:
In my attempt to implement post-postinstall scripts for Ken to use for
TeXlive it turned out that the same hack I used for the pre-postinstall
perpetual scripts wouldn't really work. So I've imple
On 11/24/2014 3:19 PM, Ken Brown wrote:
And I'll make some TeX Live postinstall scripts to test it with.
I've done this now. For a complete TeX Live install (including all 68
texlive-collection-* packages), the postinstall time was reduced from 48
minutes to 15 minutes on my sys
On 11/28/2014 4:57 PM, Achim Gratz wrote:
Achim Gratz writes:
New versions of the setup programs and incremental autorebase package
are uploaded, plus my original texlive postinstall (not modified for the
new setup) for Ken to look at.
Correction:
--8<---cut here---sta
On 11/29/2014 2:16 PM, Achim Gratz wrote:
Ken Brown writes:
Were the new setup programs built from what's currently at your Git
repo? If so, I have a couple of very minor comments:
Except for the addition of .cmd as an alias for .bat, yes.
- // Look for any scripts in /etc/postin
On 12/1/2014 3:16 PM, Achim Gratz wrote:
Achim Gratz writes:
This is now in Git together with the other corrections, but I haven't
tested it yet.
Needed two const qualifiers to compile on Cygwin and sorting is now
tested to work correctly. Please give it a spin, I'll be AFK until the
weekend.
On 12/2/2014 3:57 PM, Corinna Vinschen wrote:
On Dec 2 21:50, Corinna Vinschen wrote:
On Nov 28 22:53, Achim Gratz wrote:
New versions of the setup programs and incremental autorebase package
are uploaded, plus my original texlive postinstall (not modified for the
new setup) for Ken to look a
On 12/6/2014 11:57 AM, Corinna Vinschen wrote:
Hi,
isn't it rather annoying that even Base packages have dependencies
outside the Base category? So, even if I perform a plain Base-only
installation, I get asked if dependencies shall be fullfilled, which, as
a question, is more than borderline a
On 12/6/2014 12:57 PM, Corinna Vinschen wrote:
On Dec 6 12:40, Ken Brown wrote:
On 12/6/2014 11:57 AM, Corinna Vinschen wrote:
Hi,
isn't it rather annoying that even Base packages have dependencies
outside the Base category? So, even if I perform a plain Base-only
installation, I get
On 12/7/2014 6:36 AM, Corinna Vinschen wrote:
On Dec 7 11:45, Achim Gratz wrote:
Corinna Vinschen writes:
The _update-info-dir script just collects all info files from /usr/info
and /usr/share/info and creates new "dir" using install-info. I was
hoping that the method from _{inc}autorebase co
On 12/8/2014 11:48 AM, Achim Gratz wrote:
Ken Brown writes:
I'm not convinced that we need to worry so much about all these
details. What if we just check (based on timestamps of files in
/etc/setup/*.lst.gz) whether anything has been installed into
/usr/info or /usr/share/info since we
On 12/9/2014 5:43 AM, Corinna Vinschen wrote:
On Dec 8 15:52, Ken Brown wrote:
On 12/8/2014 11:48 AM, Achim Gratz wrote:
Ken Brown writes:
I'm not convinced that we need to worry so much about all these
details. What if we just check (based on timestamps of files in
/etc/setup/*.l
On 12/9/2014 12:48 PM, Corinna Vinschen wrote:
On Dec 9 17:35, Achim Gratz wrote:
Corinna Vinschen writes:
I still don't grok why everybody is so hot on keeping the base install
so very small. Our Base package set is really tiny in comparison
with any Linux distro. Perl is default on most of
On 12/9/2014 2:52 PM, Corinna Vinschen wrote:
On Dec 9 14:10, Ken Brown wrote:
On 12/9/2014 12:48 PM, Corinna Vinschen wrote:
Come to think of it. When exactly do we want to allow installing
packages without also installing the deps? How much sense does
this option really have?
I'v
On 12/13/2014 10:56 AM, Achim Gratz wrote:
--8<---cut here---start->8---
wget="wget -rxnH http://cygwin.stromeko.net/noarch/release";
$wget/_autorebase-001000-1-src.tar.xz
$wget/_autorebase-001000-1.tar.xz
$wget/setup.hint
--8<---cut here--
On 12/13/2014 10:56 AM, Achim Gratz wrote:
Requirements before deployment:
- all autodep stuff referring to _autorebase must be removed
- setup.exe version 2.858 or later must be used
Notes:
There will be no ITP for _incautorebase since Corinna wanted a
replacement for _autorebase instead.
D
On 12/14/2014 3:56 AM, Achim Gratz wrote:
Packages rebuilt with cygport including the changes discussed with Ken
and pre-compiled setup.exe files added.
--8<---cut here---start->8---
cygwin=http://cygwin.stromeko.net/
wget $cygwin/noarch/release/_autorebase/_
On 12/14/2014 12:52 PM, Achim Gratz wrote:
Ken Brown writes:
I just noticed a couple of things about the base address. First, you
have a typo in line 4 of rebaselst (missing 'd').
I'll fix that before the actual release. Unless someone defines
BaseAddress in the environme
On 12/14/2014 3:48 PM, Achim Gratz wrote:
Ken Brown writes:
The changes look good, and it works fine on an existing installation.
But there's a problem with a new installation. The autorebase
postinstall script seems to hang in one of the calls to "find", which
I finally kil
On 12/16/2014 8:23 AM, Corinna Vinschen wrote:
What would be most helpful is to get a piece of documentation for us
maintainers how to use the new _autorebase facility, sent with a fat
HEADSUP subject, and which we can ideally add to setup.html.
More importantly, maintainers need to be told abo
done
fi
break
done
if [ -f ${postinstalldir}/texlive.refresh_fmts ]
then
/usr/bin/fmtutil-sys --refresh
mv -f ${postinstalldir}/texlive.refresh_fmts \
${postinstalldir}/texlive.refresh_fmts.done
fi
From 408d371b734ab7295adfaf1d1ad9e4fa9481ce7c Mon Sep 17 00:00:00 2001
From: Ken Brown
Da
On 12/16/2014 5:49 PM, Ken Brown wrote:
Now that setup.exe supports perpetual postinstall scripts, I'd like to
streamline the TeX Live postinstall process. I'm attaching two perpetual
postinstall scripts that I'd like to use (one before the ordinary postinstall
scripts and one
On 12/17/2014 4:52 AM, Corinna Vinschen wrote:
On Dec 17 10:39, Corinna Vinschen wrote:
On Dec 16 16:11, Ken Brown wrote:
On 12/16/2014 8:23 AM, Corinna Vinschen wrote:
What would be most helpful is to get a piece of documentation for us
maintainers how to use the new _autorebase facility
On 12/16/2014 6:08 PM, Ken Brown wrote:
Sorry, there was a stupid mistake in one of the patches. The corrected
one is attached.
This is embarrassing, but there was a mistake in a second patch also.
I'm reattaching the complete set of cygport patches, corrected.
I had made some
On 12/18/2014 3:22 AM, Achim Gratz wrote:
Ken Brown writes:
+ if [ -d /usr/share/texmf-dist ]
Looks like you'd want
if [ -d ${D}/usr/share/texmf-dist ]
here.
Thanks. I hope this is the last of the careless mistakes.
In postinstall scripts we remove the updmap
On 12/18/2014 8:11 AM, Ken Brown wrote:
On 12/18/2014 3:22 AM, Achim Gratz wrote:
I don't really like the idea of using /etc directly for this, what if
every package starts doing that? If /usr/share//postinstall
doesn't work, we should at least create a subdirectory in /etc for th
On 1/5/2015 2:51 AM, Yaakov Selkowitz wrote:
On 2014-12-18 07:11, Ken Brown wrote:
On 12/18/2014 3:22 AM, Achim Gratz wrote:
Ken Brown writes:
+if [ -d /usr/share/texmf-dist ]
Looks like you'd want
if [ -d ${D}/usr/share/texmf-dist ]
here.
Thanks. I hope this is the last o
On 1/14/2015 12:46 PM, Achim Gratz wrote:
Corinna Vinschen writes:
Clisp is not yet ported to 64bit and it has problems under 32bit as well
(temporary file generation) that also affect Maxima from ports.
If it's a problem with the Cygwin DLL, it would be nice to get a
bug report and, preferred
On 1/5/2015 12:52 PM, Achim Gratz wrote:
Ken Brown writes:
Do you have an opinion about that? I suggested /etc/texmf/postinstall
or /var/lib/texmf/postinstall, but Achim had other ideas. The only
precedent we have so far is Achim's new _autorebase, which uses
/etc/rebase.
Even for t
On 1/23/2015 5:57 AM, Dr. Volker Zell wrote:
gcc -c -ggdb -O2 -pipe -Wimplicit-function-declaration
-fdebug-prefix-map=/cygdrive/d/misc/src/release/xemacs-21.4.22-2.i686/build=/usr/src/debug/xemacs-21.4.22-2
-fdebug-prefix-map=/cygdrive/d/misc/src/release/xemacs-21.4.22-2.i686/src/xemacs-21.4.
On 1/14/2015 4:19 PM, Ken Brown wrote:
On 1/14/2015 12:46 PM, Achim Gratz wrote:
Corinna Vinschen writes:
Clisp is not yet ported to 64bit and it has problems under 32bit as well
(temporary file generation) that also affect Maxima from ports.
If it's a problem with the Cygwin DLL, it
On 1/23/2015 3:09 PM, Corinna Vinschen wrote:
Hi Ken,
On Jan 23 08:48, Ken Brown wrote:
On 1/14/2015 4:19 PM, Ken Brown wrote:
It is. There's a configure option "--ignore-absence-of-libsigsegv". But there
are more serious problems, affecting both the 32-bit and 64-bit vers
On 1/23/2015 8:48 AM, Ken Brown wrote:
My guess is correct. lisp.exe uses bit 31 (counting from the LSB) as a marker
during garbage collection, and this is incompatible with Cygwin's use of high
memory for the heap. I think I know how to fix this (by defining
LINUX_NOEXEC_HEAPCODES i
On 1/30/2015 4:41 AM, Corinna Vinschen wrote:
Hi Ken,
On Jan 29 15:25, Ken Brown wrote:
On 1/23/2015 8:48 AM, Ken Brown wrote:
My guess is correct. lisp.exe uses bit 31 (counting from the LSB) as a marker
during garbage collection, and this is incompatible with Cygwin's use of high
m
On 1/30/2015 8:25 AM, Ken Brown wrote:
On 1/30/2015 4:41 AM, Corinna Vinschen wrote:
On Jan 29 15:25, Ken Brown wrote:
I'm attaching the patches that I applied (on top of Reini's patches) in
order to make the build succeed. I also had to use libdb4.5 instead of
libdb4.8.
Is that o
On 1/30/2015 2:02 PM, Yaakov Selkowitz wrote:
On Fri, 2015-01-30 at 11:40 -0500, Ken Brown wrote:
On 1/30/2015 8:25 AM, Ken Brown wrote:
On 1/30/2015 4:41 AM, Corinna Vinschen wrote:
On Jan 29 15:25, Ken Brown wrote:
I'm attaching the patches that I applied (on top of Reini's p
On 1/30/2015 11:40 AM, Ken Brown wrote:
On 1/30/2015 8:25 AM, Ken Brown wrote:
On 1/30/2015 4:41 AM, Corinna Vinschen wrote:
On Jan 29 15:25, Ken Brown wrote:
I'm attaching the patches that I applied (on top of Reini's patches) in
order to make the build succeed. I also had to us
On 2/3/2015 6:33 AM, Corinna Vinschen wrote:
Hey guys,
On Jan 28 21:23, Corinna Vinschen wrote:
https://cygwin.com/setup-test-x86.exe
https://cygwin.com/setup-test-x86_64.exe
These should fix the aforementioned bug I introduced, as well as another
subtil problem when checking and unchec
On 2/3/2015 10:27 AM, Corinna Vinschen wrote:
On Feb 3 08:04, Ken Brown wrote:
On 2/3/2015 6:33 AM, Corinna Vinschen wrote:
Hey guys,
On Jan 28 21:23, Corinna Vinschen wrote:
https://cygwin.com/setup-test-x86.exe
https://cygwin.com/setup-test-x86_64.exe
These should fix the
301 - 400 of 1095 matches
Mail list logo
