Re: Onboard raid controllers a problem?

Steve Dondley wrote: > "Support for onboard RAID controllers has been depreciated in the > Linux 2.6 Kernel. If you desire RAID the system may be configured with > software RAID or you may select a hardware RAID controller." Onboard software raid controller support has indeed, I think, been depri

Re: amd-64 vs Pure-64

On Thu, Sep 22, 2005 at 09:23:38PM +0200, Goswin von Brederlow wrote: > "Marc F. Clemente" <[EMAIL PROTECTED]> writes: > > > I was finally able to build ooo2 from sources for amd64. Try it at: > > > > deb http://mclemente.net/debian/ ./ > > > > If it doesn't work for you, I doubt I would be able

Onboard raid controllers a problem?

Is anyone out there running a AMD64 system with onboard raid controllers? Any problems? I'm looking at buying a server with a Tyan Thunder K8S Pro S2882G3NR motherboard with an onboard cotnroller but the server complany states on their website that: "Support for onboard RAID controllers has been

Re: powernowd only 2 modes?

Lennart Sorensen ha scritto: >Well as far as I know an Athlon 64 Mobile 3200 only has 800, 1200 and >2000Mhz as far as I recall. > [EMAIL PROTECTED]:~$ dmesg | grep powernow-k8 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b) powernow-k8:0 : fid 0xc (2000 MHz), vid 0

Re: Backing up a dual opteron server with an Pentium 4 server

i havent got an amd64 server however ive done this sort of thing in more stupid combinations like cross distribution (turbo linux, slackware and redhat), cross os (freebsd vs linux vs openbsd) and cross arch (powerpc vs sparc vs intel). not because of design simply because the servers where in pla

Re: Backing up a dual opteron server with an Pentium 4 server

depends on 'what' the p4 is taking over. if its just webserving or something, but application servers are more complicated for web services etc that just have config files it shouldnt be a problem Dean Steve Dondley wrote: I've got a Pentium 4 web server that I'm going to replace with a Dual O

Backing up a dual opteron server with an Pentium 4 server

I've got a Pentium 4 web server that I'm going to replace with a Dual Opteron server. I'd like the Pentium 4 server to be able to take over for the Dual Opteron temporarily in case it fails. Besides the obvious decline in performance, might there be any unforeseen complications stemming from the

Re: nvida driver is not working after reboot

El jue, 22-09-2005 a las 12:24 +0200, Alexander Fieroch escribió: > Hello, > > every time I reboot my computer (SID, kernel 2.6.13) xorg can not load > the nvidia driver build with m-a. > I have uninstalled the previously installed proprietary nvidia driver > and build the nvidia driver with m-a

Problems with Acrobat Reader 7.0 in pure64 environment

Hello everybody, I am trying to repeat what has been done, apparently with success, to have acrobat reader working in a pure64 environment following what is written in: http://lists.debian.org/debian-amd64/2005/05/msg00703.html http://lists.debian.org/debian-amd64/2005/05/msg00707.html I repeat fo

Re: Why has xlibmesa-dri grown by 73.5 MB in DSA 816-1?

On 10420 March 1977, Helge Kreutzmann wrote: > (please CC: me, thanks!) Set your M-f-t. > Any idea, what could cause the dri-package to consume an additional > 73.5 MB? Install it, run strip over the files (dpkg -c). Looks like the x build on amd64 didnt get stripped... -- bye Joerg * libpng

Re: Request to test a G77 bug on 64-bit platforms

On Thu, 2005-09-22 at 10:47 -0400, Kevin B. McCarty wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Hi folks, > > Could I request someone to test for the presence of a G77 bug on 64-bit > platforms? Please install g77 and gcc on a *Sid* machine and ensure > that gcc is a symlink to

Re: Problems with new Ati graphic drivers

Lennart Sorensen wrote: > On Thu, Sep 22, 2005 at 08:12:39PM +0200, Sylvain Archenault wrote: > >>After a kernel upgrade I can't load fglrx again, actually I can't have >>3D acceleration : >> >>[EMAIL PROTECTED]:~$ fglrxinfo >>display: :0.0 screen: 0 >>OpenGL vendor string: Mesa project: www.mesa

Re: powernowd only 2 modes?

On Thursday 22 September 2005 14:49, Jo Shields wrote: > dmesg | grep powernow-k8 anybody knows what this means ? terkuile:~$ dmesg | grep powernow-k8 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3) powernow-k8: BIOS error: maxvid exceeded with pstate 2 I can find the er

Re: amd-64 vs Pure-64

"Marc F. Clemente" <[EMAIL PROTECTED]> writes: > I was finally able to build ooo2 from sources for amd64. Try it at: > > deb http://mclemente.net/debian/ ./ > > If it doesn't work for you, I doubt I would be able to help > you. Constructive criticism is welcome. > > Marc You are aware that you a

Re: Problems with new Ati graphic drivers

On Thu, Sep 22, 2005 at 08:12:39PM +0200, Sylvain Archenault wrote: > After a kernel upgrade I can't load fglrx again, actually I can't have > 3D acceleration : > > [EMAIL PROTECTED]:~$ fglrxinfo > display: :0.0 screen: 0 > OpenGL vendor string: Mesa project: www.mesa3d.org > OpenGL renderer stri

Re: Problems with new Ati graphic drivers

Sylvain Archenault wrote: > Sylvain Sauvage wrote: > >>Samedi 27 août 2005, 09:48:24 CEST, Sylvain Archenault a écrit : >> >> >>>Sylvain Sauvage wrote: >>> >>> Fri, 26 Aug 2005 20:23:33 +0200, Sylvain Archenault a écrit : >[...] >But i can't load the module, here is the

Re: nvida driver is not working after reboot

On Thu, Sep 22, 2005 at 12:24:24PM +0200, Alexander Fieroch wrote: > every time I reboot my computer (SID, kernel 2.6.13) xorg can not load > the nvidia driver build with m-a. > I have uninstalled the previously installed proprietary nvidia driver > and build the nvidia driver with m-a. Then I've

Why has xlibmesa-dri grown by 73.5 MB in DSA 816-1?

Hello, (please CC: me, thanks!) the infamouse XFree-update wants to severly increase disk usage. I finally found the culprit: remaxp:~# env LANG=C apt-get install xlibmesa-dri Reading Package Lists... Done Building Dependency Tree... Done Suggested packages: libglide3 The following packages will

Re: nvida driver is not working after reboot

Jo Shields wrote: > 2.6.13 doesn't work with 7174. Hmmm... then I had better exit this X session immediately! ;) [EMAIL PROTECTED]:~$ grep "NVIDIA X" /var/log/Xorg.0.log (II) NVIDIA X Driver 1.0-7174 Tue Mar 22 06:47:49 PST 2005 [EMAIL PROTECTED]:~$ uname -a Linux honig 2.6.13 #3 Sun Sep 11

Re: transcode - mplex - a/v sync problem

Last I tried transcode I found it terrible for keeping in sync. It seems to rip apart the stream and loose all sync info. I had some bad mpg from a hardware encoding pvr-250 card, and transcode messed up sync religiously. Use ffmpeg or mencoder (part of mplayer). Both seem to keep stuff in s

Re: Request to test a G77 bug on 64-bit platforms

Kevin B. McCarty wrote: > Could I request someone to test for the presence of a G77 bug on 64-bit > platforms? Please install g77 and gcc on a *Sid* machine and ensure > that gcc is a symlink to gcc-4.0 and g77 is a symlink to g77-3.4. Unpack > the attached tarball and run "make" inside, then let

Re: nvida driver is not working after reboot

On Thu, Sep 22, 2005 at 04:26:27PM +0200, Sythos wrote: > For nVidia, and *ONLY* for nVidia, I prefer download&compile directly > from nvidia installer, there are too critical aspect every kernel > subversion... > > The time spent with nv-installer is about the same of "apt-get&C." Some of us pre

Re: transcode - mplex - a/v sync problem

Not sure of tcmplex does the same or not.  I never got it to compile. bbmpeg was removed from the transcode package after the 0.6.14 release, and since tcmplex depended on it, tcmplex was removed as well.  It's no longer part of the transcode (1.0.0_6) package. I tried to configure and make 0

Request to test a G77 bug on 64-bit platforms

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi folks, Could I request someone to test for the presence of a G77 bug on 64-bit platforms? Please install g77 and gcc on a *Sid* machine and ensure that gcc is a symlink to gcc-4.0 and g77 is a symlink to g77-3.4. Unpack the attached tarball and ru

Re: nvida driver is not working after reboot

Sythos wrote: On Thu, Sep 22, 2005 at 12:24:24PM +0200, Alexander Fieroch wrote: every time I reboot my computer (SID, kernel 2.6.13) xorg can not load the nvidia driver build with m-a. For nVidia, and *ONLY* for nVidia, I prefer download&compile directly from nvidia installer, there

Re: nvida driver is not working after reboot

On Thu, Sep 22, 2005 at 12:24:24PM +0200, Alexander Fieroch wrote: > every time I reboot my computer (SID, kernel 2.6.13) xorg can not load > the nvidia driver build with m-a. For nVidia, and *ONLY* for nVidia, I prefer download&compile directly from nvidia installer, there are too critical aspec

Re: nvida driver is not working after reboot

tony mancill wrote: Alexander Fieroch wrote: Hello, every time I reboot my computer (SID, kernel 2.6.13) xorg can not load the nvidia driver build with m-a. I have uninstalled the previously installed proprietary nvidia driver and build the nvidia driver with m-a. Then I've installed nvidia

Re: nvida driver is not working after reboot

Alexander Fieroch wrote: > Hello, > > every time I reboot my computer (SID, kernel 2.6.13) xorg can not load > the nvidia driver build with m-a. > I have uninstalled the previously installed proprietary nvidia driver > and build the nvidia driver with m-a. Then I've installed nvidia-glx and > rest

Re: remove unwanted modules

On Wed, Sep 21, 2005 at 09:06:44PM -0500, Marc DM wrote: > Actually, I wanted to know just for knowing purposes. > > The other reason I wanted to know is because I'm using Debian with a > single Opteron246 to create a router to handle traffic between 4 vlans > and the internet. So I wanted to ma

Re: transcode - mplex - a/v sync problem

On Wed, Sep 21, 2005 at 11:47:24PM -0600, William Brown wrote: > Having some trouble here syncing audio/video on dvd creations... > > First of all, here's a list of the tools I'm using: > AMD64 sid > jpg-6b (manual compile/install) > lame-3.96-1 (manual compile/install) > mjpegtools-1.8.0 (manual

Re: powernowd only 2 modes?

On Thu, Sep 22, 2005 at 09:00:25AM -0400, Lennart Sorensen wrote: > On Thu, Sep 22, 2005 at 02:30:39PM +0200, Bruno Ducrot wrote: > > It is also possible to modify the system clock > > (sometimes mis-called FSB on AMD64/Opteron systems), > > and therefore will have a consequence on the frequency of

Re: powernowd only 2 modes?

On Thu, Sep 22, 2005 at 02:30:39PM +0200, Bruno Ducrot wrote: > It is also possible to modify the system clock > (sometimes mis-called FSB on AMD64/Opteron systems), > and therefore will have a consequence on the frequency of the > processor. > In the latter case, linux support only one chipset at

ipw2100 (wlan-card)

Hi all ! Did anyone get ipw2100 + firmware running in 64-bit ? I only got it running in 32-bit. I think, it might be the firmware, as the comnputer hangs at startup as soon as the firmware is going to be loaded. Best regards Hans -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subjec

Re: media player

On Thu, Sep 22, 2005 at 10:50:59AM +0900, Craig Hagerman wrote: >Yeah it's fast, but it crashes regularly for me after suffering the > famed 99% CPU problem. Azureus says to upgrade to java 1.5 which > isn't available for Debian amd64 yet. (well at least not as an apt-get > upgrade from bl

Re: powernowd only 2 modes?

On Wed, Sep 21, 2005 at 07:26:18PM -0500, Mike wrote: > I have an amd64 3000. Does this only support 1Ghz or 1.8Ghz? No Steps? > If not how do you get it to use steps? > > analyzing CPU 0: > driver: powernow-k8 > CPUs which need to switch frequency at the same time: 0 > hardware limits: 10

Re: powernowd only 2 modes?

Mike wrote: [EMAIL PROTECTED]:~/old/home/mike/videos$ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 47 model name : AMD Athlon(tm) 64 Processor 3000+ stepping: 0 cpu MHz : 1005.156 cache size : 512 KB fpu

Re: nvida driver is not working after reboot

Alexander Fieroch wrote: Hello, every time I reboot my computer (SID, kernel 2.6.13) xorg can not load the nvidia driver build with m-a. I have uninstalled the previously installed proprietary nvidia driver and build the nvidia driver with m-a. Then I've installed nvidia-glx and restarted gd

Re: nvida driver is not working after reboot

On Thu, Sep 22, 2005 at 12:24:24PM +0200, Alexander Fieroch wrote: > every time I reboot my computer (SID, kernel 2.6.13) xorg can not load > the nvidia driver build with m-a. > I have uninstalled the previously installed proprietary nvidia driver > and build the nvidia driver with m-a. Then I've

Re: amd64 sources.list file

On Wed, 21 Sep 2005 21:07:04 -0700 lordSauron <[EMAIL PROTECTED]> wrote: > basically I should reinstall using an amd64 disk? Yes, and don't forget to save any data you want to keep if you're installing over your current configuration. -- Regards, Kaare - -- To UNSU

Re: powernowd only 2 modes?

On Thu, Sep 22, 2005 at 06:48:46AM -0500, Mike wrote: > [EMAIL PROTECTED]:~/old/home/mike/videos$ cat /proc/cpuinfo > processor : 0 > vendor_id : AuthenticAMD > cpu family : 15 > model : 47 > model name : AMD Athlon(tm) 64 Processor 3000+ > stepping: 0 > cpu

Re: Migrate running IA32 system to Debian AMD 64?

[EMAIL PROTECTED] wrote: Hello, I have a running critical production server, running Debian Sarge 32 Bits version. I would like to migrate to Debian-AMD64 system, how can I do it, without interrupting for more than 5 minutes my services which are running on it? I mounted the ISO debian-31r0

Re: powernowd only 2 modes?

[EMAIL PROTECTED]:~/old/home/mike/videos$ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 47 model name : AMD Athlon(tm) 64 Processor 3000+ stepping: 0 cpu MHz : 1005.156 cache size : 512 KB fpu : yes

nvida driver is not working after reboot

Hello, every time I reboot my computer (SID, kernel 2.6.13) xorg can not load the nvidia driver build with m-a. I have uninstalled the previously installed proprietary nvidia driver and build the nvidia driver with m-a. Then I've installed nvidia-glx and restarted gdm - xorg is working. After

Re: powernowd only 2 modes?

On Wed, Sep 21, 2005 at 07:26:18PM -0500, Mike wrote: > I have an amd64 3000. Does this only support 1Ghz or 1.8Ghz? No Steps? > If not how do you get it to use steps? I don't know. You should give more information, especially cat /proc/cpuinfo and compare with http://www.amd.com/us-en/Processo

Re: media player

Craig Hagerman ([EMAIL PROTECTED]) wrote: > On 9/22/05, v0n0 <[EMAIL PROTECTED]> wrote: > > Yannick - Debian/Linux ha scritto: > > > > > Hi, > > > > > > I've made the .deb for mplayer available on aMule's network (ed2k). > > > (because those .deb aren't available as debian way (using apt-get) > > >

Re: transcode - mplex - a/v sync problem

Scrive William Brown <[EMAIL PROTECTED]>: > Hi: > > Having some trouble here syncing audio/video on dvd creations... > > First of all, here's a list of the tools I'm using: > AMD64 sid > jpg-6b (manual compile/install) > lame-3.96-1 (manual compile/install) > mjpegtools-1.8.0 (manual compile/ins

Re: media player

> > As for the original questionwhen you asked about "viewing movies" > are you talking about viewing DVDs or viewing any movies (Xvid / DivX, > etc)? I use Totem to watch TV shows or other things in mpeg4/avi > format. I like Xine for watching DVDs. I like that both of them DO > have a menu