Julien BLACHE a écrit :
Greg Kochanski <[EMAIL PROTECTED]> wrote:
Here is /var/log/messages.
The scanner got wedged twice, once around 00:33:50 and again
around 00:38:00. Then, it worked nicely until I turned it
off, around 01:09.
Mar 16 00:13:52 gpk -- MARK --
Mar 16 00:29:41 gpk kernel: usb 2-
Luke Q a écrit :
Package: libusb-0.1-4
Version: 2:0.1.10a-6
Severity: important
After upgrading to the most recent version of libusb, gphoto2 fails
(usually in the middle of downloading the third photo or so) with the
following errors:
gp_port_read: Resource temporarily unavailable
*** Error ***
PT
tag 302304 + unreproducible
thanks
Andreas Schmidt a écrit :
Package: hddtemp
Version: 0.3-beta13-3
Severity: normal
After update, the demon should be restarted.
Currenly hddtemp is stopped before the upgrade and restarted just after.
Wasn't it the case for you? Have you seen any error?
A copy and
Scott M. Likens wrote:
Hope that helps.
[code]
html xsane-negative.jpg
sane-problems-doc.html xsane-new.jpg
sane-scantips-doc.html xsane-ocr.jpg
sane-xsane-advanced-doc.html xsane-open.jpg
sane-xsane-batch-scan-doc.html
severity 293082 wishlist
tag 293082 + pending
thanks
Hi!
Nathan R. Valentine wrote:
Package: libsane
Version: 1.0.15-6
Please include the following hotplug device string for the Epson
CX6600.
#EPSON Corp.|Stylus CX6600
libusbscanner 0x0003 0x04b8 0x08130x
0x
On Mon, Jan 31, 2005 at 04:14:18PM -0800, Scott M. Likens wrote:
> Nay, only installed from deb's.
Ok, coud you please run
dpkg -S /usr/share/doc/xsane/html/sane-problems-doc.html
and send me the result? I would like to know if the files in
/usr/share/doc/xsane/html/ are owned by a package or n
Shaul Karl wrote:
Package: lm-sensors
Version: 1:2.9.0-13
Severity: minor
When upgrading TO 2.9.0-12, dpkg announces that /etc/blacklist.d is
not removed because it is populated with lm-sensors. Doesn't lm-sensors
assumes responsibility for /etc/blacklist.d/lm-sensors?
Yes, that's true. However,
giuseppe bonacci wrote:
Package: lm-sensors
Version: 1:2.9.0-12
Severity: wishlist
the buggy BIOS of my motherboard sets the cpu fan to full speed on
power-on, but leaves it alone on reboot.
I must use fancontrol to avoid getting mad for the noise. but when I
reboot (e.g. to boot windows) fancontr
[EMAIL PROTECTED] wrote:
I'd better say "(e.g. to go to single user mode, boot solaris/x86,
boot freebsd...)"
that is: I need to control my fan speed, fullstop.
fancontrol do that job, when it is running. It don't has to do its job
when it is not running!
the only ways I found are:
1. send fancon
[EMAIL PROTECTED] a écrit :
Package: hddtemp
Version: 0.3-beta12-12
Followup-For: Bug #235422
ahrairah:/home/admin/hddtemp-0.3-beta12/src# gdb hddtemp
GNU gdb 6.3-debian
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you
are
welcom
Frederic Peters a écrit :
Hi Aurelien
Hi!
Did the new libusb break ABI ? I can rebuild libgphoto2 against the
new version but this won't fix other packages using libusb.
No, the ABI is still the same. What has changed is the way to
communicate with the kernel, the newer version allow bigger packe
Svante Signell wrote:
diversion of /lib/modules/2.4.27-1-686/kernel/drivers/i2c/i2c-algo-bit.o
to /lib/modules/2.4.27-1-686/old-i2c/i2c-algo-bit.o by i2c-2.4.27-1-686
Everything seems to be normal, so I don't know what happens exactly. I
tried a lot of installation and upgrade sequences (even 2.7.
Hi,
Sorry, I forgot about the second part of your bug report, ie, the
machine B. I split the bug report in two, so we can speak of each
machine in a different thread.
Concerning the machine B, ie the machine, with the via686a, could you
please tell me the kernel you are using (2.4 or 2.6). It h
On Mon, Jan 10, 2005 at 08:08:27PM +0100, Svante Signell wrote:
> On Mon, 2005-01-10 at 15:55 +0100, Aurélien Jarno wrote:
> > Svante Signell wrote:
> > > diversion of /lib/modules/2.4.27-1-686/kernel/drivers/i2c/i2c-algo-bit.o
> > > to /lib/modules/2.4.27-1-686/ol
Bernhard R. Link wrote:
Package: pdftk
Version: 1.12-1
Severity: wishlist
The attached patch adds a new generate_fdf action to generate a FDF
out of a PDF file. (As the format is to ugly to write it directly
by hand). As I'm neighter fluently in java nor in C++, I guess it
could use some review.
T
forwarded 289846 [EMAIL PROTECTED]
thanks
On Tue, Jan 11, 2005 at 05:49:48PM +0100, Bernhard R. Link wrote:
> On Tue, Jan 11, 2005 at 12:15:15PM +0100, Aurélien Jarno wrote:
> > >The attached patch adds a new generate_fdf action to generate a FDF
> > >out of a PDF file. (As
On Tue, Jan 11, 2005 at 08:23:23PM +0100, Aurélien Jarno wrote:
> forwarded 289846 [EMAIL PROTECTED]
> thanks
>
> On Tue, Jan 11, 2005 at 05:49:48PM +0100, Bernhard R. Link wrote:
> > On Tue, Jan 11, 2005 at 12:15:15PM +0100, Aurélien Jarno wrote:
> > > >The attached
Hi,
What is the current state of the packages? If you don't have any news
from your sponsor, I think it's time to bypass it.
I can sponsor you if you want, unless Jochen, one of the upstream,
wanted to do so.
I use python-matplotlib at work, and I really want to see it in Debian,
in order to no
Romain Riviere wrote:
Sure. Btw, the chip module itself is called via686a, no such thing as
i2c-via686 ;)
Yes, sorry I meant via686a, only bus drivers has i2c- as prefix.
marla:/home/smokey# lsmod | grep i2c
i2c_isa 1856 0
i2c_sensor 3456 1 via686a
i2c_dev
Romain Riviere wrote:
Well I tried both : my old sensors.conf for the same machine, and the
latest Debian version. With the Debian file I get such nonsensical max
settings as :
P/S Fan: 2220 RPM (min = 56250 RPM, div = 8) ALARM
>
Yep, that's fifty-six thousand RPM, no wonder the ALARM go
tag 290477 + sid
severity 29047 grave
thanks
Loïc Minier wrote:
Package: mozilla-locale-fr
Severity: normal
Hi,
Sorry for the obvious report, but mozilla-locale-fr is uninstallable in
sid, and soon to be uninstallable in sarge (hence I'm not tagging sid).
I am tagging the package sid, as
Aurélien Jarno wrote:
I am tagging the package sid, as mozilla-locale-fr is still installable
in sid and will still be installable in sarge (mozilla won't migrate to
sarge if some packages become uninstallable in sarge).
Oops, I meant ...mozilla-locale-fr is uninstallable in sid but is and
zze-Beta Testeur LABROSSE A ext RD-CSRD-GRE wrote:
Hi list,
Hi Aurélien,
I try to reproduce the bug with:
kernel-source-2.4.24 2.4.24-3
kernel-patch-2.4-lowlatency 20040516
and a Cisco wifi PC-Card.
Thanks for this test, however, it seems that the problem was caused byt
the kerne
zze-Beta Testeur LABROSSE A ext RD-CSRD-GRE wrote:
Hi,
A little mistake in a copy paste.
You may read :
kernel-patch-2.4-preempt 20040321-2
In place of
kernel-patch-2.4-lowlatency 20040516
Ok, so it's seems to corresponds to what google says, ie there is no
problem with the kernel-patch-2.4-
Scott M. Likens wrote:
desolation:/var/log/cups# dpkg -S /usr/share/doc/xsane/html/sane-problems-doc.html
dpkg: /usr/share/doc/xsane/html/sane-problems-doc.html not found.
desolation:/var/log/cups# ls /usr/share/doc/xsane
changelog.Debian.gz xsane.ACCELKEYS xsane.BUGS xsane.TODO
chan
Daniel J. Priem wrote:
Package: hddtemp
Version: 0.3-beta12-9
Severity: normal
>
If i run
/etc/init.d/hddtemp restart
Stopping disk temperature monitoring daemon: done.
Starting disk temperature monitoring daemon: /dev/hda /dev/hde /dev/hdg.
telnet localhost 7634
2.
ok. edited /etc/default/hddtem
Brian Ristuccia wrote:
On Tue, Feb 08, 2005 at 10:13:51AM +0100, Aurelien Jarno wrote:
Do you get also the problem with 'lsusb -v' (for the usbutils packages).
As it cycle through all possible values of the libusb structures, it
think it is a good test.
lsusb -v seems to work OK. But it's not link
retitle 294285 mozilla-thunderbird: wrapping doesn't work as expected
reassign 294285 mozilla-thunderbird
thanks
Arno wrote:
Hello,
You reported the problem on the French translation. Is it specific to
it?
I was asking the question to myself.
I'm using the french version of thunderbird. I don't k
Joshua Dunamis wrote:
Excuse for my english, I'm italian. I noticed the same thing. After I
click on Prewies the Xsane locks up. But I tried with kooka and it' the
same thing. So I thing is sane and not xsane affected by this bug. I use
an USB scanner HP 3400C. Before I upgraded to the last version
tag 294139 + sarge
tag 294139 + sid
thanks
Brian Ristuccia wrote:
On Tue, Feb 08, 2005 at 08:38:22PM -0500, Brian Ristuccia wrote:
After some testing, I determined that the combination of usbutils (0.70-1)
and libusb-0.1-4 (0.1.9-1) on arm results in bogus zero values for
bNumInterfaces and the ass
reopen 294139
tags 294139 - sid
thanks
Brian Ristuccia wrote:
At any rate, your experimental code seems to allow interoperability with
kernels that don't pass back all of the descriptor info. The lsusb -v output
is now plausible and rudimentary testing with various userspace programs
requiring libu
Milan Zamazal a écrit :
AJ> Milan, could you please run USBDEBUG=255 gphoto2
AJ> put_your_args_here, and send me the result?
This doesn't output anything.
Ok, I need to understand why.
AJ> Also, doing an strace (just run strace gphoto2
AJ> put_your_args_here,) would be useful.
I'll
On Fri, Feb 25, 2005 at 06:22:11PM +0100, Aurélien Jarno wrote:
> Milan Zamazal a écrit :
> >AJ> Milan, could you please run USBDEBUG=255 gphoto2
> >AJ> put_your_args_here, and send me the result?
> >
> >This doesn't output anything.
> Ok, I n
On Fri, Feb 25, 2005 at 07:34:49PM +0100, Milan Zamazal wrote:
> >>>>> "AJ" == Aurélien Jarno <[EMAIL PROTECTED]> writes:
>
> AJ> Next step, could you please run gphoto2 in debugging mode to see
> AJ> if there is something interesting in
Hi!
After looking at the logs you send me and at the code, I may have found
a problem. It seems to be possible that the kernel returns less data
than expected, but returns some data. This is currently not handle in
libusb.
Could you please test this version with USB_DEBUG=255 ?
http://temp.aurel3
On Sat, Feb 26, 2005 at 02:13:42PM +0100, Milan Zamazal wrote:
> Unfortunately it still segfaults. Here is the log:
That's strange, that doesn't seems to correspond to what gphoto2 says.
Could you please send me the log of both libusb (the test version)
and gphoto2 in debug mode?
BTW, the origi
On Sat, Feb 26, 2005 at 02:52:26PM +0100, Milan Zamazal wrote:
> AJ> BTW, the original bug report mentions you are using a kernel
> AJ> 2.6.9. Are you still using the same kernel?
>
> Yes. (And don't forget libusb-0.1-4 1:0.1.8-17 still works perfectly.)
The way libusb communicate with t
On Sat, Feb 26, 2005 at 03:54:02PM +0100, Milan Zamazal wrote:
> test3 (please note this one doesn't segfault and produces expected
> output):
Nice !
The only difference between test2 and test3 version is the size of
blocks that are requested to the device. 16kB in test2 and 4kB in test3.
It seems
reassign 298041 i2c
retitle 298041 i2c: use a different ABI than the kernel one
severity 298041 grave
tag 298041 + sarge
tag 298041 + sid
thanks
Benoit Hamet a écrit :
Hope that you get it :]
I think that perhaps if struct semaphore is the same size of int
client_count, then perhaps the size are th
39 matches
Mail list logo
