On Fri October 13 2006 05:50, [EMAIL PROTECTED] wrote:
To clarify X hasn't worked since the move from 6.9 but it does run. I get
an impressionist image and moveable square which represents the mouse, as I
can move it about. My suspicion is some change to the PCI code/memory map
as I imagine
Strange. I have UP1100 motherboard with ATI Technologies Inc RV280
[Radeon 9200 PRO] controller and total lock up still after unstable was
going for Xorg instead of XFree86. Kernel is self compiled 2.16.18 for
nautilus. The hardware setup is almost the same and you have no
problems.. ?
Anyway
[EMAIL PROTECTED] wrote:
Strange. I have UP1100 motherboard with ATI Technologies Inc RV280
[Radeon 9200 PRO] controller and total lock up still after unstable was
going for Xorg instead of XFree86. Kernel is self compiled 2.16.18 for
nautilus. The hardware setup is almost the same and you
On Wed, 2006-10-04 at 01:36 -0400, Ivan Jager wrote:
Heh, I was somehow expecting it to drop me back into a firmware prompt.
After a reboot the bits seemed to still be around, so I attached the
output of ser pim. This was with the G200, xorg 7.1.0-1, on the c3700.
Nothing from Xorg.0.log
On Tue, 3 Oct 2006, Ivan Jager wrote:
On Mon, 2 Oct 2006, Grant Grundler wrote:
On Sun, Oct 01, 2006 at 02:15:42AM -0400, Ivan Jager wrote:
...
Then it will start cycling between:
FLT 500B SYS BD bus timeout
FLT CB74 SYS BD bad os HPMC cksm
FLT CBFC SYS BD OS HPMC br err
FLT CBF0 SYS BD HPMC
On Mon, 2 Oct 2006, Grant Grundler wrote:
On Sun, Oct 01, 2006 at 02:15:42AM -0400, Ivan Jager wrote:
...
Then it will start cycling between:
FLT 500B SYS BD bus timeout
FLT CB74 SYS BD bad os HPMC cksm
FLT CBFC SYS BD OS HPMC br err
FLT CBF0 SYS BD HPMC initiated
To paraphrase, the chassis
Ivan Jager wrote:
Yes. Um, for people on debian-alpha: I guess I should have explicitly said
I was crossposting to avoid confusion. The fbdev driver with G200 is
working on hppa now. (I only tried fbdev with the radeon on alpha, and
that didn't work.)
For the one or two of us reading this
On Sun, Oct 01, 2006 at 02:15:42AM -0400, Ivan Jager wrote:
...
Then it will start cycling between:
FLT 500B SYS BD bus timeout
FLT CB74 SYS BD bad os HPMC cksm
FLT CBFC SYS BD OS HPMC br err
FLT CBF0 SYS BD HPMC initiated
To paraphrase, the chassis codes mean:
o Someone accessed an address
On Mon, 25 Sep 2006, Bob Tracy wrote:
Bob Tracy wrote:
Tomorrow I'll try yanking the ATI card and putting the old TGA2 back in,
just to see if Xorg 7.1 will work with the hardware that worked back in
the 6.8 days.
The good (I think) news is that the TGA2 works fine with the latest
Xorg 7.1
http://www.parisc-linux.org/faq/graphics-howto.html
Look for Which non-HP PCI graphics cards work with PA-RISC Linux?
On 10/1/06, Ivan Jager [EMAIL PROTECTED] wrote:
On Mon, 25 Sep 2006, Bob Tracy wrote:
Bob Tracy wrote:
Tomorrow I'll try yanking the ATI card and putting the old TGA2 back
Ivan Jager wrote:
Can anyone else with an mga or radeon check whether it is in fact broken
on hppa?
I'm currently using the fbdev driver with the G200. I can't vouch for
it's stability, but it seems to be working.
This is encouraging.
Haven't tried fbdev on Alpha with 7.1, but it was
11 matches
Mail list logo