On Thu, 8 Jul 1999, Dale Scheetz wrote:
> I just got the new laptop, and have been quite satisfied with it, except
> when it comes to X...
>
> The primary problem is that I must configure X for a serial mouse, because
> I don't know what device and port to pick for the touchpad. Am I out of
> lu
greetings,
i beg to differ on debian's support of the mca bus
i have an ibm ps/2 70 and installed debian 2.1 on it w/no problem
the only thing was applying a patch to support the network card...but
other than that there was absolutely no problems.
jd?
i have recently obtained a ps/2 - 70 with an mca smc-tcp mc nic and
initially could not get the kernel to properly recognize the nic but that
was because i needed to apply a patch to one of the standard nic
drivers...i just found the patch yesterday but have not tried to apply it
but along the way
for the neomagic cards on compaq presarios(i have the 1680) you can
now use the svga serverget it from the unstable tree or get it from
xfree86.org..there will be no new neomagic-xserver i think because the
hardware specs were released to the xfree86 people so they incorporated it
int
Greetings all,
i'll try to keep this as short was possible
i need someone to point me somewhere where i can find info on
networking.such as setup and protocols, hardware etc...
its for a home network..and i think its a great way to introduce 4
kids to linux (before they're completely
Greetings all
ok i have started x on a compaq presario laptop 1680
pentium 200
32 mb sdram
neo geo 128 vid card w/4 mb
and synaptics ps/2 touchpad..
i have started x although it is at a VERY low resolution at 8bpp
i was using the svga serverand the mouse does not work.
i was
Greetings all,
I'm trying to install debian and X(if possible) on a compaq 1680 presario
laptopi downloaded the newest hamm disksand because of the way all
of the software came on one "quik-restore " cd...i had to use fips to
create a partition for debian. I left the partition unforma
Greetings all,
just a quick question..does hamm have built-in support to read FAT-32
Partitions
Regards,
jd?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Greetings everyone,
i'm having trouble mounting a fat 32 partition, mounting my zip drive
(Also FAT 32) and would like some advice on reading some Mac Formatted
disks(floppy & Zip). Any advise is greatly appreciated.
Regards,
jd?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject o
Greetings all,
Currently i'm building a machine and am down to the last piece of
hardware, the video card. i was wondering if anyone could shed some light
on the pro's/con's of the following cards:
ATI all-in-wonder
Diamond Viper
Matrox Millenium II
just a few words about any problems experien
Greetings all,
i remember seeing a few posts regarding the ATI All-in-Wonder Video card
some time backi was wondering if there was an x-server for it??? Were
there any problems with using the card in X
TIA,
jd?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscr
Greetings,
This card is not currently supported by debian, to my knowledge.
Partially, i would assume because it is so nes and Rendition, which makes
the controller, just recently released the white-papers to the xfree86
project so that they may start development on the x-server for it. So...
i
Greetings,
i have recently purchased a Diamond Stealth II S220. i was wondering what
x-server to use. I've tried a few from the debian site but to no avail.
If it is elsewhere, i would appreciate the site's address. It has 4MB
SGRAM and RAMDAC of 170MHz and a Rendition Verite V2100 controller
Greetings all,
i need help in the key sequence used for stopping xdm from starting up at
boot up.
TIA,
jd?
--
E-mail the word "unsubscribe" to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST. Trouble? E-mail to [EMAIL PROTECTED] .
Greetings all,
OK, the ongoing saga of my ppp dialup continues. pon now attempts the
connection(my modem is now recognized!). It dials and then thats it. We
use Kerberos Authen so i do not know if this is causing the
problem. The logs show that after the handshake the host(my school) asks
Does anyone know if there exists a debian package that simulates any type
of MC68K assembler?? Specifically the TUTOR software. Any help is
greatly appreciated.
Regards,
jd
PS. On the MC68K, TUTOR is a 16kb resident package, that allows various
assembler type commands to be issued to the proc
Greeting all.
First off this list has been hella helpful in getting my debian box up and
running. Gimp is wonderful. Ok now on to my last "Real" project. I need
to get a ppp dialup connection up and running. I was trying to start off
with using my modem to connect, at least a dummy conne
Greetings all,
i was looking for Kermit, remember that old thing? I did not find it the
Debian Packages site. I did down load it from www.columbia.edu/kermit/ in
a tar'ed-gz'ed file but had problems when i tried to tar -x it?!?!?
Any idea where i can find it in a regular .deb file Any
hel
18 matches
Mail list logo
