Hello All, red this article it might be helpful:
http://ronymattar.com/blog/?p=10 http://ronymattar.com/blog/?p=10
Manuel Pégourié-Gonnard-2 wrote:
>
> Hi all,
>
> My new laptop (asus F80L-4P007C) comes with an Atheros AR5418 wifi
> chipset,
> which apparently doesn't work well with madwifi f
Am 2008-09-08 09:33:46, schrieb Kevin Mitchell:
> The ath9k in 2.6.27-rc5 is working famously for me on my Thinkpad T60
> AR5418. I'm even creeping past 11g speeds (25MB/s on a good day). Here
25 MByte or 25 MBit?
If you mean the first one, you are a liar...
If you mean the second one, you have a
Oh, you're right, I guess I didn't notice that before. In any case, it
doesn't appear to cause any problems for me either. It's just an
annoying error message.
Kevin
On Thu, Sep 18, 2008 at 12:42 PM, Celejar <[EMAIL PROTECTED]> wrote:
> On Thu, 18 Sep 2008 12:06:10 -0700
> "Kevin Mitchell" <[EMAIL
On Thu, 18 Sep 2008 12:06:10 -0700
"Kevin Mitchell" <[EMAIL PROTECTED]> wrote:
> When you run dhclient without arguments, it tries to get an ip address
> on any of the interfaces listed with /sbin/ifconfig minus the lo
> interface. If you take a look at that output with the ath9k module
> loaded,
When you run dhclient without arguments, it tries to get an ip address
on any of the interfaces listed with /sbin/ifconfig minus the lo
interface. If you take a look at that output with the ath9k module
loaded, you'll see a "wmaster0" interface. My understanding is that
this is a kind of abstractio
I would suggest reporting this to the ath9k-devel list:
https://lists.ath9k.org/mailman/listinfo/ath9k-devel especially if it
is reproducible.
Kevin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Kevin Mitchell a écrit :
> Sorry if I used the wrong notation, that was 25 Mbits/s ~ 3.2 Mbytes/s
> which is only slightly faster that 11g so it's not that "wow", but an
> improvement nonetheless.
>
Well, even if the improvement is not great, it's an improvement. So it's
cool given that my basic p
Sorry if I used the wrong notation, that was 25 Mbits/s ~ 3.2 Mbytes/s
which is only slightly faster that 11g so it's not that "wow", but an
improvement nonetheless.
What modules is module assistant trying to build? The headers
shouldn't be a problem. If you've compiled your own kernel, just make
Kevin Mitchell a écrit :
> The ath9k in 2.6.27-rc5 is working famously for me on my Thinkpad T60
> AR5418. I'm even creeping past 11g speeds (25MB/s on a good day).
Wow. Here I can't do tests since my only other local machine has slow
wifi, but yes, ath9k form 2.6.27-rc5 works fine too (except tha
The ath9k in 2.6.27-rc5 is working famously for me on my Thinkpad T60
AR5418. I'm even creeping past 11g speeds (25MB/s on a good day). Here
are instructions for compiling the kernel in Debian:
http://www.thinkwiki.org/wiki/How_to_install_the_development_version_of_atk9k.
There is also someone on U
Le (on) Thursday 04 September 2008 02:40, Celejar a écrit (wrote) :
>> ADDRCONF(NETDEV_UP): wlan0: link is not ready
>
> This line generally appears when the card comes on-line; if all goes well,
> it should soon be followed by something like 'ADDRCONF(NETDEV_CHANGE):
> eth0: link becomes ready'
On Wed, 03 Sep 2008 23:14:46 +0200
mpg <[EMAIL PROTECTED]> wrote:
> Le (on) mercredi 03 septembre 2008 22:20, mpg a écrit (wrote) :
>
> > which means my AP when down and my laptop on battery (don't know which one
> > is responsible).
> >
> Well, I did the test. When the AP gets down, I can see
>
On Wed, 03 Sep 2008 21:58:54 +0200
mpg <[EMAIL PROTECTED]> wrote:
...
> By the way, I was perhaps a bit to fast saying that "it wotks". Actually it
> worked for the whole day, then there was a general electrical failure,
> which means my AP when down and my laptop on battery (don't know which one
Le (on) mercredi 03 septembre 2008 22:20, mpg a écrit (wrote) :
> which means my AP when down and my laptop on battery (don't know which one
> is responsible).
>
Well, I did the test. When the AP gets down, I can see
wlan0: No ProbeResp from current AP - assume out of range
which looks perfect
Le (on) mercredi 03 septembre 2008 02:30, Celejar a écrit (wrote) :
>> wmaster: unknown hardware address type 801
>>
> I think this message is normal; I get it too with both my Atheros and
> Broadcom cards.
>
Ok, thanks for the info.
By the way, I was perhaps a bit to fast saying that "it wotks
On Wed, 03 Sep 2008 00:12:08 +0200
mpg <[EMAIL PROTECTED]> wrote:
...
> Rebooted on the new kernel. Wireless networking looks working now. I still
> have a warning/error
>
> wmaster: unknown hardware address type 801
>
> when running dhclient, but now 'Rx invalid nwid' stays at 0 in th output o
Le (on) mardi 02 septembre 2008 23:30, mpg a écrit (wrote) :
>> Maybe with a newer kernel that includes the ath9k driver, it 'might'
>> work.
>>
> 2.6.27-rc5 is building right now. I'll see.
>
Rebooted on the new kernel. Wireless networking looks working now. I still
have a warning/error
wmaste
Le (on) mardi 02 septembre 2008 22:40, Wayne Topa a écrit (wrote) :
>> http://madwifi.org/wiki/Compatibility/Atheros#AtherosAR5418
>
> It's reported there to be working on an Apple Macbook. Is that what an
> asus F80L-4P007C is?
>
Not exactly. But I naively thought that the driver was f
mpg wrote:
Hi all,
My new laptop (asus F80L-4P007C) comes with an Atheros AR5418 wifi chipset,
which apparently doesn't work well with madwifi from current Lenny. This
chipset is reported to work with madwifi at:
http://madwifi.org/wiki/Compatibility/Atheros#AtherosAR5418
It's reporte
Le (on) mardi 02 septembre 2008 21:50, mpg a écrit (wrote) :
> 1. Use a more recent madwifi snapshot.
Ok, I just tried this one. Apparently it doesn't help.
> 2. Try a 2.6.27 kernel with the new ath9k driver which is supposed to
> handle my chipset.
Looks like it's time for me to compile my fir
20 matches
Mail list logo
