[slim] Re: SB2 Wireless stops working

2007-01-15 Thread ceejay
Don't know, sounds like a question you should ask support... -- ceejay ceejay's Profile: http://forums.slimdevices.com/member.php?userid=148 View this thread: http://forums.slimdevices.com/showthread.php?t=31610 _

[slim] Re: SB2 Wireless stops working

2007-01-15 Thread RL boy
ceejay;170474 Wrote: > Have you looked inside at the wireless module (IIRC its a distinct board > that is plugged in - you could even swap it with your "good" unit to see > if the fault follows the board. > > One fall back, instead of buying a new unit, might be to get a cheap > Wireless repeate

[slim] Re: SB2 Wireless stops working

2007-01-15 Thread ceejay
Have you looked inside at the wireless module (IIRC its a distinct board that is plugged in - you could even swap it with your "good" unit to see if the fault follows the board. One fall back, instead of buying a new unit, might be to get a cheap Wireless repeater if you can find one... Ceejay

[slim] Re: SB2 Wireless stops working

2007-01-15 Thread RL boy
ceejay;170396 Wrote: > Not sounding too good then. Have you tried a hard reset of the box? > > Press and hold 1 while cycling power will reprogam the xilinx in the > box. Less drastic than... > > Press and hold add while cycling power will do a factory reset of the > box. (this will erase al

[slim] Re: SB2 Wireless stops working

2007-01-15 Thread ceejay
Not sounding too good then. Have you tried a hard reset of the box? Press and hold 1 while cycling power will reprogam the xilinx in the box. Less drastic than... Press and hold add while cycling power will do a factory reset of the box. (this will erase all current settings) If these don't

[slim] Re: SB2 Wireless stops working

2007-01-15 Thread RL boy
Kyle;170347 Wrote: > My SB3's mac address got changed for some unknown reason (power surge, > probably), and I spent much of a day trying to figure out why it would > not connect to the network. I finally discovered the mac address did > not match the address on the bottom of the machine. A qui

[slim] Re: SB2 Wireless stops working

2007-01-14 Thread Kyle
My SB3's mac address got changed for some unknown reason (power surge, probably), and I spent much of a day trying to figure out why it would not connect to the network. I finally discovered the mac address did not match the address on the bottom of the machine. A quick change of mac address and

[slim] Re: SB2 Wireless stops working

2007-01-14 Thread SteveEast
RL boy;170314 Wrote: > I dont't have MAC filtering enabled. Check that the MAC address is correct anyway. Steve. -- SteveEast SteveEast's Profile: http://forums.slimdevices.com/member.php?userid=4193 View this thread: h

[slim] Re: SB2 Wireless stops working

2007-01-14 Thread RL boy
Amauta;169949 Wrote: > Some times the MAC address can change. If you use MAC filtering on your > wireless network you better check this first. > > hold the left button for a while - go to current settings - MAC > address. Check if it's the same as writen on the bottom of your > squeezebox. > >

[slim] Re: SB2 Wireless stops working

2007-01-14 Thread RL boy
sposthuma;170276 Wrote: > I had a similar issue, perfectly working 2 box wireless setup suddenly > started having networking issues. Turned out to be network > interference, perhaps my neighbour got a wireless router or a new phone > in the same spectrum. Anyway, I changed the channel of the rout

[slim] Re: SB2 Wireless stops working

2007-01-14 Thread sposthuma
I had a similar issue, perfectly working 2 box wireless setup suddenly started having networking issues. Turned out to be network interference, perhaps my neighbour got a wireless router or a new phone in the same spectrum. Anyway, I changed the channel of the router and things went back to normal

[slim] Re: SB2 Wireless stops working

2007-01-13 Thread Amauta
Some times the MAC address can change. If you use MAC filtering on your wireless network you better check this first. hold the left button for a while - go to current settings - MAC address. Check if it's the same as writen on the bottom of your squeezebox. I hope this helps... -- Amauta