Dear ALL,
I would like to upgrade UHD.
is there any way to do it?
In advance many thanks
--
Regards,
Diyar Muhammed
Ministry of Higher Education and Scientific Research
Duty: Network Administration and Design
Website: www.mhe-krg.org
Cell Phone: 009647504690060
Office Phone: 00964662554683
when I
run uhd_image_loader --args="type=x300,addr=192.168.10.2,fpga=HGS", I got
from terminal uhd_image_loader: command not found.
I need advace, about this problem:
*uhd_image_loader: command not found.*
*FYI, I use Live_USB.*
--
Regards,
Diyar Muhammed
Ministry of Higher Education and Scie
alid packets and invalid packets gives you a packet error
> rate.
>
> Best regards,
> Marcus
>
>
> On 21.03.2016 11:47, Diyar Muhammed wrote:
>
> Marcus,
> I look at ofdm_loopback.grc example, I made the same scenario but I had
> problem with Error Rate block I g
nd behave a lot more like a real system would.
>
> Have a look at the ofdm_loopback.grc example; you can replace the
> (channelmodel->throttle) by a USRP sink and source. Tadah! Live demo.
>
> Best regards,
> Marcus
>
>
> On 21.03.2016 11:34, Diyar Muhammed wrote:
>
&g
ile sink (saving the samples from the USRP source to another
> file).
>
> Then use benchmark_rx with the --from-file option to read in these saved
> samples.
>
> Best regards,
> Marcus
>
>
> On 21.03.2016 11:17, Diyar Muhammed wrote:
>
> Dear Marcus,
> Thank you ve
chmark_ scripts, you **set** the rates, and you can only
> observe how many packets were successfully transmitted.
> The rest is really very basic math.
>
> Best regards,
> Marcus
>
>
> On 21.03.2016 10:50, Diyar Muhammed wrote:
>
> Dear SangHyuk,
> I would like to
analyze your requirements and challenges!
>
> Best regards
> Marcus
>
> ___
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
t is
> possible.
> For many kinds of multiplexing, there's even already blocks that do the
> core of the job.
>
> Best regards,
> Marcus
>
>
> On 14.03.2016 20:14, Diyar Muhammed wrote:
>
> Dear All,
> Is there any way to do multiplexing and demultiplexing in GN
Dear All,
Is there any way to do multiplexing and demultiplexing in GNU radio
software?
--
Regards,
Diyar Muhammed
Ministry of Higher Education and Scientific Research
Duty: Network Administration and Design
Website: www.mhe-krg.or <http://www.mhe-krg.org/>g
Cell Phone: 009647504690060
Dear All,
I have made a transceiver in gnuradio software with using usrp B210, and I
would like to measure data transmission between Tx and Rx, is there any way
to measure that?
--
Regards,
Diyar Muhammed
Ministry of Higher Education and Scientific Research
Duty: Network Administration and Design
> you took from the web.
> You must use the scripts in the version that came with your installation
> of GNU Radio!
> You should probably find those under /usr/share/gnuradio/examples/digital
> or /usr/local/share/gnuradio/examples/digital
>
> Best regards,
> Marcus
>
>
ions.modulation], options)
File "benchmark_tx.py", line 61, in __init__
self.txpath = transmit_path(modulator, options)
File "/home/mint/Downloads/transmit_path.py", line 61, in __init__
self.amp = gr.multiply_const_cc(1)
AttributeError: 'module' object has no att
Dear ALL
for example we use qpsk modulation and 1M sample rate,
what is the transmission throughput? data rate
--
Regards,
Diyar Muhammed
Ministry of Higher Education and Scientific Research
Duty: Network Administration and Design
Website: www.mhe-krg.org
Cell Phone: 009647504690060
Office
13 matches
Mail list logo