problem.
Obviously what I was trying to do will not work.
Thanks again.
Jim
-Original Message-
From: Vasil Velichkov
Sent: Saturday, September 30, 2023 9:26 AM
To: Elmore’s
Cc: discuss-gnuradio@gnu.org
Subject: Re: Index Error: output_index < noutputs
Hi Jim,
On 29/09/2023 17
coupling between blocks. The selector block has iindex port that you can use
>> to change the input port, see
>> https://wiki.gnuradio.org/index.php/Selector#Messages
>>
>> Regards,
>> Vasil
>>
>>> -Original Message- From: Vasil Velichkov
>>>
that you can use to change
the input port, see https://wiki.gnuradio.org/index.php/Selector#Messages
Regards,
Vasil
> -Original Message- From: Vasil Velichkov
> Sent: Thursday, September 28, 2023 5:00 AM
> To: Elmore Family
> Cc: discuss-gnuradio@gnu.org
> Subject: Re
, how do I create the
proper instance?
Jim
-Original Message-
From: Vasil Velichkov
Sent: Thursday, September 28, 2023 5:00 AM
To: Elmore Family
Cc: discuss-gnuradio@gnu.org
Subject: Re: Index Error: output_index < noutputs
Hi Elmore,
On 28/09/2023 04.58, Elmore Family wrote:
I mo
Hi Marcus,
Thanks for your kind words! Thank you and thanks to all other current and past
gnuradio maintainers and contributors for all the effort put in this great
project!
Regards,
Vasil
On 28/09/2023 14.46, Marcus Müller wrote:
> Hi Vasil,
>
> just wanted to express my appreciation for
Hi Vasil,
just wanted to express my appreciation for the detail of investigation you're doing there.
Thanks!
Marcus
On 27.09.23 19:55, Vasil Velichkov wrote:
Hi Elmore,
On 27/09/2023 03.17, Elmore Family wrote:
I am using a gnu radio flowgraph to attempt to select the appropriate Selector
Hi Elmore,
On 28/09/2023 04.58, Elmore Family wrote:
> I moved the Selector code (i.e. set_wave_select(wave_select)) into the
> portion of my code which runs after the flowgraph is running. I still get the
> same error.
Where did you moved it? Can you provide the modified source code?
Are
-gnuradio@gnu.org
Subject: Re: Index Error: output_index < noutputs
Hi Elmore,
On 27/09/2023 03.17, Elmore Family wrote:
I am using a gnu radio flowgraph to attempt to select the appropriate
Selector Block output as explained below. The following error occurs when
I run the flowgraph: Index Er
Jeff,
The freq block is an OOT module. I didn’t think they had a GRC file.
Jim
From: Jeff Long
Sent: Wednesday, September 27, 2023 4:13 PM
To: GNURadio Discussion List
Subject: Re: Index Error: output_index < noutputs
I replaced the Transmit_CESSB block with a Noise Source and Throt
nsceiver that I have had on
> the air. I am attempting to add the digital mode FT8 to it using the
> FT8_Receive block along with some additional code in the freq.py file.
>
> Jim
>
> *From:* Jeff Long
> *Sent:* Wednesday, September 27, 2023 12:18 PM
> *To:* GNURadio Discussi
: Index Error: output_index < noutputs
Sorry, it takes too much time to make guesses from fragments of a project.
Could you post a grc file that is runnable and shows the error?
On Wed, Sep 27, 2023 at 11:14 AM Elmore Family wrote:
Marcus,
I forgot to include the version: 3.9.4.0.
J
Hi Elmore,
On 27/09/2023 03.17, Elmore Family wrote:
> I am using a gnu radio flowgraph to attempt to select the appropriate
> Selector Block output as explained below. The following error occurs when I
> run the flowgraph: Index Error: output_index must be < noutputs.
> I forgot to include
To: discuss-gnuradio@gnu.org ; Elmore Family
> Subject: Re: Index Error: output_index < noutputs
>
> Hi Jim,
>
> since we've worked on Selector recently, it would **really** be important
> to
> know the
> version of GNU Radio you're dealing with!
>
> Best regar
, September 27, 2023 6:00 AM
To: discuss-gnuradio@gnu.org ; Elmore Family
Subject: Re: Index Error: output_index < noutputs
Hi Jim,
since we've worked on Selector recently, it would **really** be important to
know the
version of GNU Radio you're dealing with!
Best regards,
Marcus
--
This email
ave_select.
>
> from FT8_Receive import FT8_Receive
>
> RCV = FT8_Receive()
> wave_select = 1
> RCV.set_wave_select(wave_select)
>
>
> *From:* Paul Atreides
> *Sent:* Tuesday, September 26, 2023 6:40 PM
> *To:* Elmore's
> *Cc:* discuss-gnuradio@gnu.org
> *Sub
Hi Jim,
since we've worked on Selector recently, it would **really** be important to know the
version of GNU Radio you're dealing with!
Best regards,
Marcus
the top block of the
flowgraph. This is where I am calling set_wave_select.
from FT8_Receive import FT8_Receive
RCV = FT8_Receive()
wave_select = 1
RCV.set_wave_select(wave_select)
From: Paul Atreides
Sent: Tuesday, September 26, 2023 6:40 PM
To: Elmore's
Cc: discuss-gnuradio@gnu.org
Subject: Re
Jim, can you please re-post your flowgraph?I’ll try to take another look at it.Also, what version of GNURadio are you using?On Sep 26, 2023, at 11:48, Elmore's wrote:
I have submitted this issue previously and received a response which
resulted in my trying several things
I have submitted this issue previously and received a response which resulted
in my trying several things which didn’t work.
I then submitted the issue to Stackoverflow and received no answers.
I get this error when I try to use a Selector to select one of 2 outputs with
my selection obviously
19 matches
Mail list logo