On Sat, Nov 24, 2018 at 9:05 PM NeilBrown wrote:
>
> On Sat, Nov 24 2018, Sergio Paracuellos wrote:
>
> > Previous cleanup series was added to the staging tree without any
> > testing. After get testing feedback some issues appear and this patch
> > series should make the driver works properly aga
On Sat, Nov 24 2018, Sergio Paracuellos wrote:
> Previous cleanup series was added to the staging tree without any
> testing. After get testing feedback some issues appear and this patch
> series should make the driver works properly again.
>
> Previous series are here:
> *
> http://driverdev.lin
The sysctl register are already claimed by palmbus, so
pci fails to claim it. The best way to access the sysc registers
is to use rt_sysc_[rwm]32().
Fixes: 89e9f6e6adfc: staging: mt7621-pci: remap and use sysctl from device tree
Reported-by: NeilBrown
Signed-off-by: Sergio Paracuellos
---
drive
There is no clock driver for ralink mips and clk_enable
are no-ops for this architecture. This has been also tested
without using clocks and seems to work so avoid to use them
in this driver.
Fixes: ad9c87e129d1: "staging: mt7621-pci: parse and init
port data from device tree"
Reported-by: NeilBro
Previous cleanup series was added to the staging tree without any
testing. After get testing feedback some issues appear and this patch
series should make the driver works properly again.
Previous series are here:
*
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2018-November/1
The sysctl register are already claimed by palmbus, so
pci fails to claim it. Device tree has been updated to not
use it at all with pcie. Update bindings documentation.
Signed-off-by: Sergio Paracuellos
---
drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt | 3 +--
1 file changed, 1 insertion(
Depending of chip revision reset lines are inverted. It is also
necessary to read PCIE_FTS_NUM register before enabling the phy.
Hence update the code to achieve this.
Fixes: 745eeeac68d7: "staging: mt7621-pci: factor out 'mt7621_pcie_enable_port'
function"
Reported-by: NeilBrown
Signed-off-by:
The sysctl register are already claimed by palmbus, so
pci fails to claim it. Remove registers accordly from DT
bindings.
Fixes: 624c5227ed0a: staging: mt7621-dts: add sysctl registers base address to
pcie
Reported-by: NeilBrown
Signed-off-by: Sergio Paracuellos
---
drivers/staging/mt7621-dts/
Clocks are not necessary for the driver to work. Remove them also for
DT binding documentation.
Signed-off-by: Sergio Paracuellos
---
drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt | 6 --
1 file changed, 6 deletions(-)
diff --git a/drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt
b/
There are no real need to use clocks for pcie ports for
this driver. There is no clock driver for ralink and driver
can work without them.
Signed-off-by: Sergio Paracuellos
---
drivers/staging/mt7621-dts/mt7621.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/staging/mt7621-dts/
There is no clock driver for ralink mips and clk_enable
are no-ops for this architecture. This has been also tested
without using clocks and seems to work so avoid to use them
in this driver.
Fixes: ad9c87e129d1: "staging: mt7621-pci: parse and init
port data from device tree"
Reported-by: NeilBro
Previous cleanup series was added to the staging tree without any
testing. After get testing feedback some issues appear and this patch
series should make the driver works properly again.
Previous series are here:
*
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2018-November/1
The sysctl register are already claimed by palmbus, so
pci fails to claim it. Remove registers accordly from DT
bindings.
Fixes: 624c5227ed0a: staging: mt7621-dts: add sysctl registers base address to
pcie
Reported-by: NeilBrown
Signed-off-by: Sergio Paracuellos
---
drivers/staging/mt7621-dts/
The sysctl register are already claimed by palmbus, so
pci fails to claim it. The best way to access the sysc registers
is to use rt_sysc_[rwm]32().
Fixes: 89e9f6e6adfc: staging: mt7621-pci: remap and use sysctl from device tree
Reported-by: NeilBrown
Signed-off-by: Sergio Paracuellos
---
drive
Depending of chip revision reset lines are inverted. It is also
necessary to read PCIE_FTS_NUM register before enabling the phy.
Hence update the code to achieve this.
Fixes: 745eeeac68d7: "staging: mt7621-pci: factor out 'mt7621_pcie_enable_port'
function"
Reported-by: NeilBrown
Signed-off-by:
There are no real need to use clocks for pcie ports for
this driver. There is no clock driver for ralink and driver
can work without them.
Signed-off-by: Sergio Paracuellos
---
drivers/staging/mt7621-dts/mt7621.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/staging/mt7621-dts/
The sysctl register are already claimed by palmbus, so
pci fails to claim it. Device tree has been updated to not
use it at all with pcie. Update bindings documentation.
Signed-off-by: Sergio Paracuellos
---
drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt | 3 +--
1 file changed, 1 insertion(
Clocks are not necessary for the driver to work. Remove them also for
DT binding documentation.
Signed-off-by: Sergio Paracuellos
---
drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt | 6 --
1 file changed, 6 deletions(-)
diff --git a/drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt
b/
Depending of chip revision reset lines are inverted. It is also
necessary to read PCIE_FTS_NUM register before enabling the phy.
Hence update the code to achieve this.
Fixes: 745eeeac68d7: "staging: mt7621-pci: factor out 'mt7621_pcie_enable_port'
function"
Reported-by: NeilBrown
Signed-off-by:
The sysctl register are already claimed by palmbus, so
pci fails to claim it. Device tree has been updated to not
use it at all with pcie. Update bindings documentation.
Signed-off-by: Sergio Paracuellos
---
drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt | 3 +--
1 file changed, 1 insertion(
There are no real need to use clocks for pcie ports for
this driver. There is no clock driver for ralink and driver
can work without them.
Signed-off-by: Sergio Paracuellos
---
drivers/staging/mt7621-dts/mt7621.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/staging/mt7621-dts/
The sysctl register are already claimed by palmbus, so
pci fails to claim it. The best way to access the sysc registers
is to use rt_sysc_[rwm]32().
Fixes: 89e9f6e6adfc: staging: mt7621-pci: remap and use sysctl from device tree
Reported-by: NeilBrown
Signed-off-by: Sergio Paracuellos
---
drive
Previous cleanup series was added to the staging tree without any
testing. After get testing feedback some issues appear and this patch
series should make the driver works properly again.
Previous series are here:
*
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2018-November/1
There is no clock driver for ralink mips and clk_enable
are no-ops for this architecture. This has been also tested
without using clocks and seems to work so avoid to use them
in this driver.
Fixes: ad9c87e129d1: "staging: mt7621-pci: parse and init
port data from device tree"
Reported-by: NeilBro
The sysctl register are already claimed by palmbus, so
pci fails to claim it. Remove registers accordly from DT
bindings.
Fixes: 624c5227ed0a: staging: mt7621-dts: add sysctl registers base address to
pcie
Reported-by: NeilBrown
Signed-off-by: Sergio Paracuellos
---
drivers/staging/mt7621-dts/
Clocks are not necessary for the driver to work. Remove them also for
DT binding documentation.
Signed-off-by: Sergio Paracuellos
---
drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt | 6 --
1 file changed, 6 deletions(-)
diff --git a/drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt
b/
From: Wen Yang
This patch fixes a possible null pointer dereference in
do_load, detected by the semantic patch
deref_null.cocci, with the following warning:
drivers/staging/media/davinci_vpfe/dm365_ipipe.c:1846:25-30: ERROR: res is
NULL but dereferenced.
The following code has potential null po
Add a of_device_id struct variable and subsequent call to
MODULE_DEVICE_TABLE macro to complete device tree support.
Signed-off-by: Marcelo Schmitt
---
drivers/staging/iio/impedance-analyzer/ad5933.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/staging/iio/impedance-analy
From: Wen Yang
The null check on &padapter->registrypriv is redundant since registrypriv
is a struct inside padapter and can never be null, so the check is always
true. we may remove it.
Signed-off-by: Wen Yang
CC: de...@driverdev.osuosl.org
CC: linux-ker...@vger.kernel.org
---
drivers/stagin
On lis 23, 2018 21:51, Marcelo Schmitt wrote:
> Added a of_device_id struct variable and subsequent call to
> MODULE_DEVICE_TABLE macro to complete device-tree support for this
> driver.
>
> Signed-off-by: Marcelo Schmitt
> ---
> drivers/staging/iio/impedance-analyzer/ad5933.c | 9 +
> 1
30 matches
Mail list logo