> > > > > > I get difference results with 5.0-rc1 but neither of the above apps
> > > > > > work either, will follow up based on the rest of the thread there.
> > > > > >
> > > > >
> > > > > My first step with Raspbian is to enable the Camera interface which
> > > > > results into an appending of
Hi Peter
On Fri, 11 Jan 2019 at 06:10, Peter Robinson wrote:
>
> Hi Stefan,
>
> > > > > I get difference results with 5.0-rc1 but neither of the above apps
> > > > > work either, will follow up based on the rest of the thread there.
> > > > >
> > > >
> > > > My first step with Raspbian is to enab
Hi Stefan,
> > > > I get difference results with 5.0-rc1 but neither of the above apps
> > > > work either, will follow up based on the rest of the thread there.
> > > >
> > >
> > > My first step with Raspbian is to enable the Camera interface which
> > > results into an appending of the followin
Hi Peter,
> Peter Robinson hat am 10. Januar 2019 um 07:34
> geschrieben:
>
>
> > > Hi Stefan,
> > >
> > ...
> > >
> > > I get difference results with 5.0-rc1 but neither of the above apps
> > > work either, will follow up based on the rest of the thread there.
> > >
> >
> > My first step with
> > I get difference results with 5.0-rc1 but neither of the above apps
> > work either, will follow up based on the rest of the thread there.
> >
>
> My first step with Raspbian is to enable the Camera interface which results
> into an appending of the following lines to config.txt:
>
> start_x=1
> > Hi Stefan,
> >
> ...
> >
> > I get difference results with 5.0-rc1 but neither of the above apps
> > work either, will follow up based on the rest of the thread there.
> >
>
> My first step with Raspbian is to enable the Camera interface which results
> into an appending of the following lines
> Peter Robinson hat am 10. Januar 2019 um 06:09
> geschrieben:
>
>
> Hi Stefan,
>
...
>
> I get difference results with 5.0-rc1 but neither of the above apps
> work either, will follow up based on the rest of the thread there.
>
My first step with Raspbian is to enable the Camera interfa
Hi Dave,
> > > This patch series improves the load/unload of bcm2835 camera and audio
> > > drivers. It has been tested with Raspberry Pi 3 B and a camera module V1.
> > >
> > > This series based on current linux-next and Phil Elwell's series
> > > ("Improve VCHIQ
> > > cache line size handling"
Hi Stefan,
> > > But why didn't you applied the series which was actually applied to
> > > mainline?
> > > Did you apply the rest of Phil's DT series as mentioned in the cover
> > > letter?
> >
> > I'm fairly certain I have Phil's "Improve VCHIQ cache line size
> > handling" patch series applied
Hi Stefan,
On Wed, 2019-01-09 at 09:33 +0100, Stefan Wahren wrote:
>
> But i noticed a regression introduced in 5.0-rc1, which might be
> related. I
> tried to run "vchiq_test -f 1" and it never completes. After
> reverting commit
> 852b2876a8a8 ("staging: vchiq: rework remove_event handling")
>
Hi,
[add Arnd]
> Dave Stevenson hat am 8. Januar 2019 um 18:10
> geschrieben:
>
>
> Hi Peter
>
> On Tue, 8 Jan 2019 at 07:21, Peter Robinson wrote:
> >
> > Hi Stefan,
> >
> > > This patch series improves the load/unload of bcm2835 camera and audio
> > > drivers. It has been tested with Raspb
Hi Peter
On Tue, 8 Jan 2019 at 07:21, Peter Robinson wrote:
>
> Hi Stefan,
>
> > This patch series improves the load/unload of bcm2835 camera and audio
> > drivers. It has been tested with Raspberry Pi 3 B and a camera module V1.
> >
> > This series based on current linux-next and Phil Elwell's s
Hi Peter,
> Peter Robinson hat am 8. Januar 2019 um 09:56
> geschrieben:
>
>
> Hi Stefan,
>
> > > > This patch series improves the load/unload of bcm2835 camera and audio
> > > > drivers. It has been tested with Raspberry Pi 3 B and a camera module
> > > > V1.
> > > >
> > > > This series bas
Hi Stefan,
> > > This patch series improves the load/unload of bcm2835 camera and audio
> > > drivers. It has been tested with Raspberry Pi 3 B and a camera module V1.
> > >
> > > This series based on current linux-next and Phil Elwell's series
> > > ("Improve VCHIQ
> > > cache line size handling
Hi Peter,
> Peter Robinson hat am 8. Januar 2019 um 08:21
> geschrieben:
>
>
> Hi Stefan,
>
> > This patch series improves the load/unload of bcm2835 camera and audio
> > drivers. It has been tested with Raspberry Pi 3 B and a camera module V1.
> >
> > This series based on current linux-next
Hi Stefan,
> This patch series improves the load/unload of bcm2835 camera and audio
> drivers. It has been tested with Raspberry Pi 3 B and a camera module V1.
>
> This series based on current linux-next and Phil Elwell's series ("Improve
> VCHIQ
> cache line size handling"). After Nicolas' serie
Hi Nicolas,
> Nicolas Saenz Julienne hat am 26. Oktober 2018 um
> 13:06 geschrieben:
>
>
> Hi Stefan,
>
> On Thu, 2018-10-25 at 17:29 +0200, Stefan Wahren wrote:
> > This patch series improves the load/unload of bcm2835 camera and
> > audio
> > drivers. It has been tested with Raspberry Pi 3
Hi Stefan,
On Thu, 2018-10-25 at 17:29 +0200, Stefan Wahren wrote:
> This patch series improves the load/unload of bcm2835 camera and
> audio
> drivers. It has been tested with Raspberry Pi 3 B and a camera module
> V1.
>
> This series based on current linux-next and Phil Elwell's series
> ("Impr
18 matches
Mail list logo