Listing this for a local ham W6KLE who is not on this list. Contact info
is below:
--
Selling my elecraft K2 100 watts with KAT 100
10/80 meters built in DSP all filters real time clock and more
All manuals
Works great built
"W3DVX Rescues Legacy Elecrafts"
Hello,
Does your K1 or K2 need repair? Tuneup?
Want to sell, but it needs some attention before offering it for sale?
In addition to tuning your rig, I can also rescue a building project you
might have started some time ago.
See what my clien
I saw a noticeable uptick on 15 meters, having made a total of 74 contacts
on 10/18 and 10/20 using FT8.
73
Lyn, W0LEN
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick
Sent: Wednesday, October 21, 2020 1:22 PM
Many more EU station on 15 m today than I have seen for a while. 17 m gave me
a QSO with OD5KU for an ATNO earlier in the day. Even earlier than that I
worked JA on 160 m for the first time despite my hopelessly inadequate 5 ft agl
antenna.
I thought my luck must have changed but I suppose su
On 10/21/2020 10:56 AM, Rick NK7I wrote:
Also the response of the sound card has some variation at different
pitches (it's not a totally flat response), so try different tones.
If it does, it's broke, or a piece of crap.
73, Jim K9YC
Bonnie, KQ6XA, posted an encouraging update on sunspots to the HF Pack list.
I can't attach an image to this, but you can click on the provided URL which
shows activity for yesterday.
73,
Wayne
N6KR
> [hfpack] Sunspots sunspots sunspots
>
> For those who haven't been tuning in to HF for a wh
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Fake It keeps the tones between 1500-2000 Hz. (not 1000) so that the
harmonic energy is out of the passband.
Also the response of the sound card has some variation at different
pitches (it's not a totally flat response), so try different tones.
73,
Rick NK7I
On 10/21/2020 6:19 AM, Dave wrot
On 10/21/2020 4:49 AM, Conrad PA5Y wrote:
So given all that I am beginning to wonder if the problem is due to filter
ripple in the standard K3S 2.7kHz filter?
Many years ago, when I replaced stock 2.7kHz filters with 2.8 kHz
filters in both my rigs, it significantly reduced the incidental AM
My K3 doing the same variation. Now I am running my K3, at 70% bellow
100 watts so it will not push above the limit like I did with my KPA500.
My KPA500 is back at the Elecraft hospital.
KE1F
On 10/21/2020 10:48 AM, Dr. William J. Schmidt wrote:
I have a K3 and a K3S at my Caribbean station..
I have a K3 and a K3S at my Caribbean station... I see the same behavior on
my K3S but not on the K3. I've calibrated it several times but have not
diagnosed it past that. I've seen the power vary by as much as 50% at
times.
Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/
Conrad,
My friend just had the issue you described with a different brand radio. He was
transmitting near the high end of the TX filter and on higher tones of the FT8
the power would drop causing the TX power to waiver.
The fix for him was to enable Fake It in the WSJT-X radio settings tab. T
Hello while I wait for feedback from the (no doubt overwhelmed) Elecraft
support I thought that I would ask the group about a problem that I have with
my K3S.
When I run JT65B and even to a lesser extent FT8 I see unacceptable amplitude
variation on both the 6m output and the transverter output
I have just got a secondhand K2 # 5835 and find that the RF Gain pot needs
replacing. The component is available from Elecraft but the shipping cost to
the UK and the likely long delay means that I would prefer to source this here
or in Europe from Mouser UK or similar supplier if possible.
I kn
14 matches
Mail list logo