's all buttoned up now.
Thanks a lot for the help, hopefully it will work properly when assembled with
the rest of the front.
Now to stuff the RF board a bit and do some basic functionality tests !!
Thanks all, cheers and 73dave / VE7SGI.
- Original Message -
From: "
No worries, thanks a lot Dale.
I've put down the soldering iron and solder wick and will wait a while.
Cheers and 73dave / VE7SGI.
- Original Message -
From: "Dale Putnam"
To: "David Fee"
Sent: Saturday, 27 April, 2013 22:01:32
Subject: Re: [
..dave / VE7SGI
- Original Message -
From: "Dale Putnam"
To: "David Fee"
Sent: Saturday, 27 April, 2013 21:37:17
Subject: Re: [Elecraft] Noob build question
Hi Dave, did the switches on the left side get spaced off the board using the
spacer in the Instructio
Hi all.
I finally broke down after a few years of K2 envy and ordered a K2/10 with SSB,
NB and 160M.
I'm part way through building SN 7438 and have run into a problem.
I'm trying to fit the front panel board to the front plate and am having a fit
problem.
There are 3 short round spacers t
4 matches
Mail list logo