My answer is to use the Radio Shack Optimus SA-155 Integrated Stereo
Amplifier. It was also produced as the RCA SA-155. Specs are 1.8W per
channel, 25-25,000 Hz. Has tone and balance controls, an 1/8" stereo
phone jack and a tuner, CD/tape and phono switch. Works fine with phone
or the beef
Thank you
From: Walter Underwood
To: Elecraft Reflector
Sent: Sunday, January 1, 2017 12:21 PM
Subject: Re: [Elecraft] I need More RX Volume on my K3, has anyone run an
external audio amp?
I use this amp with my KX3. It runs off 12V and it is 15W per channel. $8.50
from Amazon
enthal
> To: Harry Yingst ; Elecraft Reflector
>
> Sent: Sunday, January 1, 2017 1:10 AM
> Subject: Re: [Elecraft] I need More RX Volume on my K3, has anyone run an
> external audio amp?
>
> There's an AUD GAIN parameter in the CONFIG menu. If it is not already set
that has taken some abuse (Military, industry etc) I
just need a little more volume.
From: Vic Rosenthal
To: Harry Yingst ; Elecraft Reflector
Sent: Sunday, January 1, 2017 1:10 AM
Subject: Re: [Elecraft] I need More RX Volume on my K3, has anyone run an
external audio amp?
T
There's an AUD GAIN parameter in the CONFIG menu. If it is not already set to
HI then try that first.
Vic 4X6GP
> On 1 Jan 2017, at 00:46, Harry Yingst via Elecraft
> wrote:
>
>
> I have the K3 and a pair of SP3 speakers
>
> When I turn down the RF gain and turn on the NR (to clean up the b
bject: [Elecraft] I need More RX Volume on my K3, has anyone run an external
audio amp?
I have the K3 and a pair of SP3 speakers
When I turn down the RF gain and turn on the NR (to clean up the band noise) I
run out of Audio (too quiet) to hear the weaker signals.
I was curious if anyo
More RX Volume on my K3, has anyone run an external
audio amp?
I have the K3 and a pair of SP3 speakers
When I turn down the RF gain and turn on the NR (to clean up the band noise) I
run out of Audio (too quiet) to hear the weaker signals.
I was curious if anyone is running a small external
I use an amplified pair of computer speakers.
73, Roger
On 12/31/2016 5:46 PM, Harry Yingst via Elecraft wrote:
I have the K3 and a pair of SP3 speakers
When I turn down the RF gain and turn on the NR (to clean up the band noise) I
run out of Audio (too quiet) to hear the weaker signals.
I
I have the K3 and a pair of SP3 speakers
When I turn down the RF gain and turn on the NR (to clean up the band noise) I
run out of Audio (too quiet) to hear the weaker signals.
I was curious if anyone is running a small external amp between the K3 and the
speakers to help bring up the volume?
9 matches
Mail list logo
