Thank you.
Gigaparts is local to me and I see they have the Bioennos in stock!!
Chris
> On Jun 24, 2019, at 4:35 PM, Jim Brown wrote:
>
>> On 6/24/2019 12:59 PM, Mark Goldberg wrote:
>> Go with LiFePO4 cells
>
> Yes. This ham-friendly company sells a wide range of LiFePO4 batteries.
> Charg
On 6/24/2019 12:59 PM, Mark Goldberg wrote:
Go with LiFePO4 cells
Yes. This ham-friendly company sells a wide range of LiFePO4 batteries.
Charge before you leave home (all Li batteries require a charger
designed for their specific chemistry, voltage, and capacity), connect
to your KX2/3 exte
Go with LiFePO4 cells. Four cells will keep the voltage between 12 and 14.4
V from 10% to 100% state of charge and most of the time the voltage is
between 13 and 13.5 V. I use small ones (3 AH )for backpack portable
operation, 20 AH for fixed portable and my RV has 400 Ah to run the rig
forever! Th
I have looked at the power issue (even though I'm not yet a KX3 owner) and with
NiMH cells at 1.2 V, the 8 cell internal battery holder would only be 9.6 V.
I'm considering an external battery pack with (2) 6 cell holders for 12 cells
total. That would be 14.4 V total. A single series diode woul
KX3 requires at least 13.8 Volts to TX 12-15 Watts.
Sent from my iPhone
...nr4c. bill
> On Jun 22, 2019, at 1:43 PM, Chris Waldrup wrote:
>
> Yes sir using 7AH gel cell.
> Just found out the issue as it works to 15W on a bench supply so the issue
> was pointed out to me by a kind list membe
Hi Chris
I use LiFePo4 batteries
The voltage is higher and I can transmit higher power for example 15 watts.
Bioenopower makes some nice ones.
Good luck Richard
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
Yes sir using 7AH gel cell.
Just found out the issue as it works to 15W on a bench supply so the issue was
pointed out to me by a kind list member that this is intentional limiting while
on lower capacity batteries.
Chris
> On Jun 22, 2019, at 1:16 PM, Scott Manthe wrote:
>
> Are you using
Are you using batteries?
73,
Scott N9AA
On 6/22/19 12:57 PM, Chris Waldrup wrote:
Hi,
I have a brand new KX3 we are using here at the Knightlites FD event in Raleigh.
In pre operations events some of the guys are helping me set up (we are using
5W for the event) but in the future I would lik
>
> Hi,
>
> I have a brand new KX3 we are using here at the Knightlites FD event in
> Raleigh.
> In pre operations events some of the guys are helping me set up (we are using
> 5W for the event) but in the future I would like full 15W capability.
> We can't get it to go above 10W using the
9 matches
Mail list logo