On Tue, Mar 13, 2012 at 11:00 AM, Dick Dievendorff wrote:
> Can you add a semicolon between HELLO and >? ...
Got it! Thanks a lot, Dick. That works, and in fact the MixW parser
works too, so I can put variable names in the macro and have them
evaluated at runtime. This is terrific.
7
It looks like there's a good opportunity here for a KX3 accessory that
Elecraft or some third party could make: a custom serial cable that plugs
into a serial port at the PC and terminates in plugs for PTT and key at the
KX3. The required circuitry could be built into the connector shell. You
shoul
Estep
Sent: Tuesday, March 13, 2012 8:36 AM
To: Elecraft
Subject: Re: [Elecraft] Subject: KX3 CW from computer
I'm trying a different approach to a workaround for this, and now I have a
macro programming question:
I can send keystrokes to the K3 via a macro like KY: HELLO. But there's a
c
I'm trying a different approach to a workaround for this, and now I
have a macro programming question:
I can send keystrokes to the K3 via a macro like KY: HELLO. But
there's a catch. MixW formats its macros like this:
This sends the HELLO, but unfortunately the terminating '>' is also
sent as '
little differently so a solution that fits all may not exist.
73, Ed - KL7UW
--
Date: Mon, 12 Mar 2012 10:08:06 -0700
From: David Gilbert
Subject: Re: [Elecraft] Subject: KX3 CW from computer
To: elecraft@mailman.qth.net
Message-ID: <4f5e2d76@cis-broadband.
On Mon, Mar 12, 2012 at 11:10 AM, Edward R. Cole wrote:
>... It will take a break-out of either
> RTS or DTR interfaced by a NPN transistor and one resistor connected
> to the KEY Jack. I can see innovated folks making the circuit inside
> the jack with sm transistor and resistor and adding wye j
"Instant change over to the paddle then the keyboard is not possible, but why
would one do that?"
The need to quickly jump in with the paddle happens often enough in
contesting to make that a pretty important capability. Most contest
loggers have a limited number of CW macros available and
The KX3 has two independent keying inputs. I like connecting the
external (computer generated) key line to the left side panel KEY-IN
jack for the automatically generated stuff and use the front-side keyer
paddle for manual sending.
The KX3 menu allows setting either or both inputs to either pa
Tony,
Essentially you have it right. It will take a break-out of either
RTS or DTR interfaced by a NPN transistor and one resistor connected
to the KEY Jack. I can see innovated folks making the circuit inside
the jack with sm transistor and resistor and adding wye jack for
connecting the pa
9 matches
Mail list logo