I absolutely LOVE my XG-3!!!
Ed N4XY
Sent from myMail for iOS
Tuesday, March 24, 2020, 9:29 PM -0400 from k...@montac.com :
>Wish I could afford to buy 4 more to fill out the CW generator setup I
>built 2 years ago
>Such useful tool.
>
>__
>Clay Autery, KY5G
>(318)
Wish I could afford to buy 4 more to fill out the CW generator setup I
built 2 years ago
Such useful tool.
__
Clay Autery, KY5G
(318) 518-1389
On 03/24/20 20:21, Eric Swartz wrote:
We have them new in the box at www.elecraft.com :-)
73,
Eric
elecraft.com
_..._
On
We have them new in the box at www.elecraft.com :-)
73,
Eric
elecraft.com
_..._
> On Mar 24, 2020, at 12:18 PM, Bill Smith via Elecraft
> wrote:
>
> Looking at buying the XG3 signal generator to calibrate S meters.
> Particularly thought it would be very useful to calibrate the S meter
Yes!
Have a great day!
Bill
From: elecraft-boun...@mailman.qth.net on
behalf of Clay Autery
Sent: Tuesday, March 24, 2020 7:41:02 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] XG3 Signal Generator
Best money I have spent on instrumentation I
Mine just happens to be sub-1dB accurate as tested I can't find the
datasheet from the XG3 measurement I did it several years ago.
I power mine with a Bioenno battery rather than a wall wart, too. FYI...
__
Clay Autery, KY5G
(318) 518-1389
On 03/24/20 14:41, Greg
Best money I have spent on instrumentation I have used it for tons
of stuff. And it REALLY makes calibrating the K3s easier and IMO more
accurate.
__
Clay Autery, KY5G
(318) 518-1389
On 03/24/20 14:17, Bill Smith via Elecraft wrote:
Looking at buying the XG3 signal
Greg,
The XG3 is a fine and easy to use tool. It is useful for a lot more
than just calibrating the S-meter. When used with the XG3 Utility, it
can serve as a full function signal generator with sweep capability.
Yes, the output is a square wave, but as soon as the signal is fed into
a
Bill,
I've had my XG3 for a few years now and have never regretted buying it. Before
I retired m business was in communications electronics. I worked for years with
IFR which then became Aeroflex, out of Whichita. I had a Aeroflex 3920
communications analzer (which is still a high end piece of
Bill Smith via Elecraft writes:
> Looking at buying the XG3 signal generator to calibrate S meters.
> Particularly thought it would be very useful to calibrate the S meter
> in the HDSDR SDR software I use now. I read the S meter calibration
> instructions in the manual and was happy to see
Looking at buying the XG3 signal generator to calibrate S meters. Particularly
thought it would be very useful to calibrate the S meter in the HDSDR SDR
software I use now. I read the S meter calibration instructions in the manual
and was happy to see how simple it is. If I had tried to use
10 matches
Mail list logo