Hello Group,
Both the K3 and XV144 manuals do not give the details to build an interface
cable between K3 (with KXV3) and XV144.
Can anybody help and show me where to get the information?
TNX & 73
Johnny Siu VR2xmc
___
YM - 離線訊息
就算你沒有上網，你的朋友仍可以留下訊息給你，當你上
Hello Johnny:
You should have received the "Elecraft Transverter Models XV50, XV144,
XV222, XV432 Owner's Manual" with your transverter kit. It's separate from
the assembly manual. See page 9 of that manual for the details.
If you don't have it, it's available for download here:
http://www.ele
re <[EMAIL PROTECTED]>
> 主題: RE: [Elecraft] how to build interface cable between K3 and XV144
> 收件人: [EMAIL PROTECTED], "'Elecraft'"
> 日期: 2008 6 27 星期五 下午 11:03
> Hello Johnny:
>
> You should have received the "Elecraft Transverter
> Models XV5
Johnny
Check the reflector archives for the past 3 days. The cable wiring
required was discussed then in several posts.
73,
Don W3FPR
Johnny Siu wrote:
> Hello Ron,
>
> Thanks for your reply.
>
> Yes, I did read p.9 of the XV144 operation manual. However, it only shows
> the interface cable
e, some of
the other connections are not the same as used in normal RS232 busses.
Ron
-Original Message-
From: Johnny Siu [mailto:[EMAIL PROTECTED]
Sent: Friday, June 27, 2008 4:04 PM
To: 'Elecraft'; Ron D'Eau Claire
Subject: RE: [Elecraft] how to build interface cabl
x27;; Ron D'Eau Claire
Subject: RE: [Elecraft] how to build interface cable between K3 and XV144
Hello Ron,
Thanks for your reply.
Yes, I did read p.9 of the XV144 operation manual. However, it only shows
the interface cable from XV144 to KI02 of K2 and NOT K3.
>From reading of
6 matches
Mail list logo
