Skip,
Make certain the K3 is getting audio into the Line In jack.
Pull the speaker or Line Out cable from your soundcard and plug
headphones or amplified computer speakers into that soundcard jack.
Then do a TX from your software application. Do you hear any audio
tones? If not, check the com
Skip,
Check your soundcard cable to your Line-in jack. I had the same problem
occur several times before I discovered the problem was the cable. I
pressed on it at the line in jack while testing and the power out came
back up. Same symptoms: no output, RX signals OK, CW and SSB OK.
Replaced th
On 6/30/2019 8:43 PM, Skip Cameron wrote:
Need suggestions on diagnosis or reset process.
VOX settings? Level changes? Windoze updates screwing with sound card
settings or choices?
73, Jim K9YC
__
Elecraft mailing list
Home: htt
While using my K3 in data A mode with wsjt-x software on 6M, TX stopped,
and other data modes also have no TX output. RX remains OK, and CW and SSB
TX & RX still work OK.
Need suggestions on diagnosis or reset process. Direct replies off list
are OK. Thanks, Skip W5GAI
___
4 matches
Mail list logo