Hi,
Don't try to transmit through any of those, even QRP! They are for receive
only such as FM and TV. I also doubt that most of them are effective below
50MHz.
AB2TC - Knut
David Christ wrote
> It says balun connector. Does that mean it is like the old F to twin lead
> connectors that had a b
It says balun connector. Does that mean it is like the old F to twin lead
connectors that had a balun internally. If so I don’t think it would do what
you want it to.
David K0LUM
> On Jul 11, 2016, at 3:08 AM, Szabó István wrote:
>
> Could these BNC adapters be used for it? No additional we
Those are for TV, so they are probably 75 Ohm. Those can be used with 50 Ohm
connectors if both are made to the BNC spec. With each one costing under a
dollar, I’m not sure about the quality.
wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)
> On Jul 11, 2016, at 4:
Could these BNC adapters be used for it? No additional weight, no more
space required.
http://www.ebay.com/itm/381429029110
73, István, HA4ZD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: htt
I vaguely someone suggesting connecting a power
pole to a single mini banana plug via a short
lead. Then different counterpoise lengths can be
connected via the power pole, and will still pull
out from the banana socket if stepped on.
Seems like a good plan, and there would be other
ways to
Bob,
If I understand your question corretly ---
But why? If you are using the BNC to binding post adapter, the ground
connection is to the same board PC ground plane as the ground connection
of the BNC to binding post adapter.
The use of the mini-banana plug is a convenience for those opera
I found these...
On Friday, July 8, 2016 11:04 AM, Robert Losee [via Elecraft]
wrote:
It would be nice if Elecraft offered a mini-banana plug for use with the
KX2 that would have a binding post or other device that would allow the
counterpoise to be attached without soldering the wire
Not exactly what you're asking for, but for stackable, non-solder mini
banana plugs, try Pomona #2945s; you can get them from Mouser and other
places online. I use the Pomona #3296 mini binding post adapter for my wire
antennas, so mini-banana is my common connector. Biggest downside is that
the Po
It would be nice if Elecraft offered a mini-banana plug for use with the
KX2 that would have a binding post or other device that would allow the
counterpoise to be attached without soldering the wire -- the binding post
to bnc connector is nice and the same binding post would be useful with the
min
9 matches
Mail list logo