That is very confusing to me now. What is this then
http://buildbot.linuxcnc.org/dists/buster/2.9-rtpreempt/binary-amd64/
On 2024/02/05 10:32, Rod Webster wrote:
You need to change your sources tohttp://buildbot2.highlab.com/ per the
instructions there
Linuxcnc never really released a version
On 2024/02/05 12:15, andy pugh wrote:
On Mon, 5 Feb 2024 at 08:20, Marius wrote:
debhttp://buildbot.linuxcnc.org buster 2.9-rtpreempt
deb-srchttp://linuxcnc.org buster 2.9-rtpreempts
They should both be builbot.linuxcnc.org, and it's "preempt" not "preempts"
Hand type typos. They are th
On Mon, 5 Feb 2024 at 08:20, Marius wrote:
> deb http://buildbot.linuxcnc.org buster 2.9-rtpreempt
> deb-src http://linuxcnc.org buster 2.9-rtpreempts
They should both be builbot.linuxcnc.org, and it's "preempt" not "preempts"
--
atp
"A motorcycle is a bicycle with a pandemonium attachment a
http://buildbot2.highlab.com/ is necessary for Bullseye and Bookworm.
Marius is talking about Buster.
The original buildbot is still building for Buster:
[image: image (1).png]
[image: image (2).png]
2.9.2:
[image: image (3).png]
Changing the Section(s) field to "master-rtpreempt" yields
That is very confusing to me now. What is this then
http://buildbot.linuxcnc.org/dists/buster/2.9-rtpreempt/binary-amd64/
The latest snapshot was on 2024-02-02
On 2024/02/05 10:32, Rod Webster wrote:
You need to change your sources to http://buildbot2.highlab.com/ per the
instructions there
L
You need to change your sources to http://buildbot2.highlab.com/ per the
instructions there
Linuxcnc never really released a version on other than Bookworm
I'm not sure if it will give you exactly what was on the Bookworm release
which was a snapshot but it will be close.
Rod Webster
*1300 896 8
Hi
I have a machine on Buster and I tried to update to the latest 2.9.2.
These are the errors.
Failed to fetch http://buildbot.linuxcnc.org/dists/buster/InRelease
Temporary failure resolving 'buildbot.linuxcnc.org'Failed to fetch
http://linuxcnc.org/dists/buster/InRelease
Temporary failure re