[Flexradio] WOODBOX T-MATE for sale - NIB

Woodbox Radio T-Mate – new in original box. Was going to use it with the 1500 that is also for sale. Best offer. Thanks. Michael Goins, k5wmg Professor, Writing University of Texas at San Antonio * * ___ FlexRadio Systems Mailing List FlexRadio

[Flexradio] FLEX 1500 for sale

My 1500 is for sale - still feel the need to spin knobs. With manual, PSDR 2.0 CD. Second owner. Works FB. $500 shipped. Michael Goins, k5wmg Professor, Writing University of Texas at San Antonio ___ FlexRadio Systems Mailing List FlexRadio@flex

[Flexradio] For Sale

* New in box and unused RM HLA150V amp designed for use with the FT-817 or Icom 703. Planned to use it with the Flex 1500 here but has never left the original box. Covers 10/12/15/17/20/40/80/160. Has 6 low pass filters and will autoswitch if your rig will allow or can be manually switched. Prot

[Flexradio] looking for a 1500 mentor

If someone has a moment, I have some questions. mike, k5wmg ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/

[Flexradio] psk

Is there some sort of step-by-step for putting a Flex (specifically a 1500) on psk? Can't seem to find a lot but I'm a newbie to SDR and I'm just getting set up. Mike, k5wmg ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-rad

Re: [Flexradio] newbie question

e using a 3K filter, change it to 500 Hz and > notice the reduction in signal power (strength). > > Also other radio's S-meter is effected by the RF gain and AGC. Not so with > the FlexRadio SDRs. These factors can account for the difference. > > > > On Wed, Jun 22, 2011

[Flexradio] newbie question

Still setting up a 1500 here and the issue of the moment is noise threshold. I am in the country and the radio I removed to replace with the 1500 had a noise level of S1 or so. With the 1500, I am up around S5 as baseline noise level. Nothing else has changed. The receiver is hotter, but not trem

Re: [Flexradio] microphones

ssage- > From: flexradio-boun...@flex-radio.biz [mailto: > flexradio-boun...@flex-radio.biz] On Behalf Of Jim Jerzycke > Sent: Monday, June 13, 2011 10:20 PM > To: Michael Goins > Cc: FlexRadio List > Subject: Re: [Flexradio] microphones > > Monoprice has the XLR cables,

[Flexradio] microphones

Anyone have a good source of cables - they are pretty expensive with Heil. Female XLR to Male XLR and Female XLR to Flex connector. mike, k5wmg ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexra

Re: [Flexradio] A computer to use

Thanks to the many who emailed off list. I much appreciate it and the questions likely have just started. Do have a computer now and a 1500 on the way, so I should be up and running (I hope) in about a week. Again, much thanks to all. Good group here. Now if I could only get the hole in the rocks

[Flexradio] 1500 information

Interested in talking to anyone who is using the 1500 about the computer in use. Off list please. Thanks. mike, k5wmg ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archiv

[Flexradio] Flex 1500

I am totally new to the Flex, having seen it at one hamfest. I am not a computer guy, though I am pretty competence as a ham (built a lot of stuff, never owned a commercial antenna, etc.). I recently switched here from Windows and PCs to Mac (I'm a writer), and really would prefer a mac platform if