3, Ray, K9DUR
>> http://k9dur.info
>>
>> -Original Message-
>> From: flexradio-boun...@flex-radio.biz
>> [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Richard Lawn
>> Sent: Saturday, December 18, 2010 1:47 PM
>> To: flexradio@flex-rad
e!
>
> 73, Ray, K9DUR
> http://k9dur.info
>
> -Original Message-
> From: flexradio-boun...@flex-radio.biz
> [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Richard Lawn
> Sent: Saturday, December 18, 2010 1:47 PM
> To: flexradio@flex-radio.biz
> Subject:
: [Flexradio] External Amp w/5000A
I have a AL811H amplifier and AmpKeyer interface that I've used with my
FT-847. I'd like to try it with my 5000A. Is there anything in particular I
should watch out for or do I just lash the Flex to the AmpKeyer using the
appropriate RCA jacks? Any advic
On Sat, Dec 18, 2010 at 12:00 PM, Michael Walker wrote:
> Gents
>
> Just to be sure, use an ohm meter to check the open circuit voltage on the
> amp keying line. It is likely 12vdc.
>
> Then, use your multimeter to see how much current the keying circuit draws.
> You do this by putting your met
Gents
Just to be sure, use an ohm meter to check the open circuit voltage on the
amp keying line. It is likely 12vdc.
Then, use your multimeter to see how much current the keying circuit draws.
You do this by putting your meter into current mode, and then shorting out
the same ptt line throug
On Sat, Dec 18, 2010 at 10:46 AM, Richard Lawn wrote:
> I have a AL811H amplifier and AmpKeyer interface that I've used with my
> FT-847. I'd like to try it with my 5000A. Is there anything in particular I
> should watch out for or do I just lash the Flex to the AmpKeyer using the
> appropriate R
I have a AL811H amplifier and AmpKeyer interface that I've used with my
FT-847. I'd like to try it with my 5000A. Is there anything in particular I
should watch out for or do I just lash the Flex to the AmpKeyer using the
appropriate RCA jacks? Any advice would be appreciated.
Rick
W2JAZ
_
7 matches
Mail list logo