On Wed, Jan 26, 2000 at 10:17:05AM +0600, Max Khon wrote:
hi, there!
can we merge this when it's ready before freeze?
Of course, if Jordan approves. This will be a pretty small
diff. Jordan?
-- Forwarded message --
Date: Tue, 25 Jan 100 22:47:26 -0500 (EST)
From: Alain
It seems Alex Zepeda wrote:
On Wed, 26 Jan 2000, Soren Schmidt wrote:
Erhm, I've forgotten the geometry of the zip, just be sure to have
the first two tracks.
[counting on fingers, then toes, then kunckles ensues]
afd0: 96MB (196608 sectors), 96 cyls, 64 heads, 32 S/T, 512 B/S
John LoVerso wrote:
Again, lemmie get on my soap box, and ask have you looked at the man page,
and compared the memory required when using -s to the memory required by
gzip?
Actually, lemmie get on my soap box and ask have you measured the time that
bunzip2 takes to run? While it does
I've had reports that a machine having USB compiled into an SMP kernel
panics. Could someone try the current version of the kernel and see what
that brings. Don't plug in any device, that will panic your system for
sure (I am working on that one).
If init of the OHCI driver fails it should now
Thus spake Rajappa Iyer ([EMAIL PROTECTED]):
That's certainly possible, although it might be a good idea to use a
variable to point to a make.conf file. This way "make release" does
not have to be too aware of what "make world" requires in
/etc/make.conf.
though a make release in any case
On 25 Jan, Alex Zepeda wrote:
I haven't been able to mount an msdos (FAT16) formattted zip disk (well
any FAT16 formatted zip disk) for quite a while. Currently I'm trying to
mount afd0s4, but no such luck (I think the latest error is something
about reading the partition table). The wd
I copied stack trace. But this is handmade copy from console, so
arguments are omitted, sorry.
-
panic()
usbd_do_request_flags()
csr_write_1()
aue_miibus_readreg()
MIIBUS_READREG()
miibus_readreg()
MIIBUS_READREG()
ukphy_service()
mii_tick()
softclock()
doreti_swi()
This morning's make world
cc -O -pipe -DLIBC_RCS -DSYSLIBC_RCS -I/usr/src/lib/libc/include
-D__DBINTERFACE_PRIVATE -DINET6 -DPOSIX_MISTAKE -I/usr/src/lib/libc/../libc/locale
-DBROKEN_DES -DYP -I/usr/obj/usr/src/i386/usr/include -c
/usr/src/lib/libc/../libc/net/nsap_addr.c -o nsap_addr.o
cc
At 22:01 01/25/2000 +0100, you wrote:
It seems Tom Embt wrote:
Don't mean to butt in here, I haven't really been following the thread -
but I may have found a workaround/clue. I have a Sony CDU-55E (ooold 2x)
on secondary master of the PIIX4 on my BP6. By going into the BIOS (the
section of
On Wed, 26 Jan 2000 07:35:32 PST, Edwin Culp wrote:
This morning's make world
What are you trying to achieve with these e-mail messages? If you're
looking for confirmation that ``make world'' is broken, then "Yes, it
is." :-)
And then when you get past _that_, you'll break in the
On Tue, 25 Jan 2000 15:27:13 +0300, Grigory Kljuchnikov wrote:
How can I update 4.0-2110 directoty tree to 4.0-2124?
And how do these updates do properly? Where can I see more about this?
The short answer is that you don't. Just wait for 4.0-RELEASE to come
out in a few weeks.
The
On Tue, 25 Jan 2000 21:19:16 EST, John Baldwin wrote:
Ok then:
'egrep -v '^(---|+++|@@|[+-]#)', geez, am I the only one who knows regex?
Are you the only person who doesn't know sed? ;-)
My untested guess (since we all seem to be mouthing off the first thing
that comes to mind) is
On Wed, 26 Jan 2000 02:02:36 +1100, Andy Farkas wrote:
So you'll notice that this file is an example and *demands* your
attention in configuring your system properly.
Change it to hosts.allow.sample then? No hosts.allow file is essentially
the same as the ALL:ALL:allow rule, no?
No.
On Wed, 26 Jan 2000, Sheldon Hearn wrote:
Change it to hosts.allow.sample then? No hosts.allow file is essentially
the same as the ALL:ALL:allow rule, no?
No. In the absence of a hosts.allow file, hosts_access(3) denies all.
Not according to what I read in 'man 5 hosts_access' -
On Thu, 27 Jan 2000 03:57:51 +1100, Andy Farkas wrote:
No. In the absence of a hosts.allow file, hosts_access(3) denies all.
Not according to what I read in 'man 5 hosts_access' - especially the
second paragraph titled "ACCESS CONTROL FILES".
Wtf?! You're right. I'm frightened now.
Here's the latest fault, from a cvsup just performed:
cc -O -pipe -DLIBC_RCS -DSYSLIBC_RCS -I/usr/src/lib/libc/include
-D__DBINTERFACE_PRIVATE -DINET6 -DPOSIX_MISTAKE -I/usr/src/lib/libc/../libc/locale
-DBROKEN_DES -DYP -I/usr/obj/usr/src/i386/usr/include -c
hello!
I have Abit motherboard with ATA-66 support.
I try to install FreeBSD-CURRENT, all good when install, but after reboot
kernel boots, but ask me a root device, when I press '?', there are no
'ad' device (this is my HDD). ;( As I understand - there are no support in
that kernel for my
What happened, it fell off the edge of the earth? Nslookup can't find it
anymore.
Chuck Robey| Interests include C Java programming, FreeBSD,
[EMAIL PROTECTED] | electronics, communications, and signal
Firs tof all, I apologize if I am reasking a question, since I haven't done
a good job of keeping up on my -current mail. Chastisment humbly accepted.
I did check the -current archive on www.freebsd.org and have not seen a mention of
this.
On my last two make worlds I have had trouble with my
On Wed, Jan 26, 2000 at 07:26:30PM +0200, Alexandr Listopad wrote:
hello!
I have Abit motherboard with ATA-66 support.
I try to install FreeBSD-CURRENT, all good when install, but after reboot
kernel boots, but ask me a root device, when I press '?', there are no
'ad' device (this is my
On Wed, Jan 26, 2000 at 01:38:44PM -0500, Chuck Robey wrote:
What happened, it fell off the edge of the earth? Nslookup can't find it
anymore.
I seem to recall an announcement from John yesterday or so, saying
that it was going to fall off the edge of the earth temporarily.
--
Matthew Hunt
On Wed, 26 Jan 2000 11:47:04 MST, Matt Miller wrote:
Chastisment humbly accepted.
*chastise* :-)
The only references to sendmail that I see in the UPDATING file is
about the move of the sendmail.cf, which doesn't seem relevant.
It's sorta relevant.
Since starting this email, I have
On Wed, 26 Jan 2000, Matthew Hunt wrote:
On Wed, Jan 26, 2000 at 01:38:44PM -0500, Chuck Robey wrote:
What happened, it fell off the edge of the earth? Nslookup can't find it
anymore.
I seem to recall an announcement from John yesterday or so, saying
that it was going to fall off the
On Wed, Jan 26, 2000 at 07:26:30PM +0200, Alexandr Listopad wrote:
hello!
I have Abit motherboard with ATA-66 support.
I try to install FreeBSD-CURRENT, all good when install, but after reboot
kernel boots, but ask me a root device, when I press '?', there are no
'ad' device (this is my
In [EMAIL PROTECTED] Alexandr Listopad
[EMAIL PROTECTED] wrote:
hello!
I have Abit motherboard with ATA-66 support.
I try to install FreeBSD-CURRENT, all good when install, but after reboot
kernel boots, but ask me a root device, when I press '?', there are no
'ad' device (this is my
Hi,
On Tue, Jan 25, 2000 at 08:51:40PM +0100, Christoph Kukulies wrote:
But as a result mgetty gets into kermit's ways such that when a
modem connection is made I suddenly get a modem prompt like
+FCON as if someone (mgetty) is either messing with my local
or the remote modem while kermit
Soren Schmidt wrote:
It seems Alex wrote:
You need to update..
OK - I've just updated. Here goes again:
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 6194MB TOSHIBA MK6409MAV [13424/15/63] at ata0-master using
UDMA33
acd0: CDROM
I'm wondering how one can do a buildworld on a machine, and then NFS
mount /usr/src and /usr/obj on a client machine and do an installworld
of the freshly built sources? I've been looking in the archives without
much success, and haven't figured it out by reading the makefiles yet.
Can anyone
On Wed, Jan 26, 2000 at 04:26:20PM -0600, [EMAIL PROTECTED] wrote:
I'm wondering how one can do a buildworld on a machine, and then NFS
mount /usr/src and /usr/obj on a client machine and do an installworld
of the freshly built sources? I've been looking in the archives without
much success,
In message [EMAIL PROTECTED], [EMAIL PROTECTED]
writes:
I'm wondering how one can do a buildworld on a machine, and then NFS
mount /usr/src and /usr/obj on a client machine and do an installworld
of the freshly built sources? I've been looking in the archives without
much success, and haven't
Sure. This can be done with no problems. It is, in fact, a good way to
put the same OS on multiple machines.
-Steve
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 26, 2000 5:26 PM
Subject: NFS /usr/src and /usr/obj?
I'm wondering how one
On Tue, Jan 25, 2000 at 09:23:23PM -0800, Kris Kennaway wrote:
On Tue, 25 Jan 2000, the Webslave wrote:
Okay, so I finally decided to take the plunge and check out ipfilter. ipf
seemed to load my ruleset with no problems, but ipfstat dies with:
ioctl(SIOCGETFS): Invalid argument
It is rumoured that Devin Butterfield had the courage to say:
I too notice these problems of mpg123 skipping during disk activity or X
graphics ops but I have always had these problems, both with -STABLE and
-CURRENT. I notice this with xmms too. So this is nothing new.
Isn't this simply a
Hi,
On Wed, 26 Jan 2000, Poul-Henning Kamp wrote:
I've done it in the past, but not recently.
Consider the alternative of mounting the destination on the compilehost
and make install DESTDIR=/mnt
Thanks to everyone for the replies. It works fine for me now. I was
automounting all of
Can I pick some FreeBSD experts brains off-list please?
anybody who can comment on the cost(s) of running large
flat directories of symlinks (eg using GNU stow for /usr/local/bin)
especially over NFS?
cheers
-George
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe
I fianlly got -current from this morning to build and install so I
started a make release this afternoon only to hit the USA_RESIDENT
block. I modified /etc/make.conf to include the appropriate line and
started again. After awhile it hit the same block:
:Can I pick some FreeBSD experts brains off-list please?
:
:anybody who can comment on the cost(s) of running large
:flat directories of symlinks (eg using GNU stow for /usr/local/bin)
:especially over NFS?
:
:cheers
: -George
There is definitely more overhead but you may not notice
On Wed, Jan 26, 2000 at 10:42:54PM -0500, jack wrote:
Today Bill Swingle wrote:
!!
You must define the value of USA_RESIDENT as 'YES' or
'NO' as appropriate, in the environment or /etc/make.conf
before building can proceed.
I was just wondering how to get rid of these errors in my startup:
Jan 26 22:12:19 culverk inetd[739]: ftp/tcp: ipsec initialization
failed; out entrust
Jan 26 22:12:19 culverk inetd[739]: telnet/tcp: ipsec initialization
failed; in entrust
Jan 26 22:12:19 culverk inetd[739]: telnet/tcp:
Peter,
I'd like to see your world log, and the output of
cd src/share/mk ; cvs diff bsd.kmod.mk. I get the following error
when I try to build world as of about 2 hours ago. I just did a cvsup
and only things in lib and ports updated.
=== sys/modules/vpo
@ -
Warner Losh writes:
: I'd like to see your world log, and the output of
: cd src/share/mk ; cvs diff bsd.kmod.mk. I get the following error
: when I try to build world as of about 2 hours ago. I just did a cvsup
: and only things in lib and ports updated.
Ummm, I think cvs did
Maybe there was a message on here that I overlooked, I'm not sure, but how
exactly do I get rid of them?
It is not harmful but I should have lower the syslog level,
sorry.
I'll soon fix it.
I just added debug flag check instead of changing syslog
level.
Could you please try the
On Wed, 26 Jan 2000, Yevmenkin, Maksim N, CSCIO wrote:
I've just found that read from /dev/bpfX never return
EAGAIN/EWOULDBLOCK.
It means that when you do a non blocking read and there is
no data you will
always get 0.
[ untested fix removed :) ]
Yes, it works. But it returns
% %It seems Russell L. Carter wrote:
% % %It seems Russell L. Carter wrote:
% % %
% % % I swapped out my motherboard and am seeing this now:
%...
%
%
% )(*$#%$# stupid magazine benchmarkers never actually test
% things like IO... gr
%
%We in the computer hardware business have a
Only recommendation I might pass on is being consistant in the use
of "USA" instead of "US". The document starts off with references
to "USA" and then changes to "US".
Following the custom used in current crypto source (i.e. "USA_RESIDENT"
in make.conf) I would suggest using "USA".
Keith
Matt Miller [EMAIL PROTECTED] writes:
It hangs on the startup of sendmail. I have replaced sendmail on my
system with Postfix. Addtionally, I have the following line in
/etc/make.conf
NO_SENDMAIL=true
That's ok : the 'make replace' of the postfix port replace
/usr/sbin/sendmail (see
cpiazz hello!
cpiazz
cpiazz I have Abit motherboard with ATA-66 support.
cpiazz I try to install FreeBSD-CURRENT, all good when install, but after reboot
cpiazz kernel boots, but ask me a root device, when I press '?', there are no
cpiazz 'ad' device (this is my HDD). ;( As I understand - there
with version 1.44 of ata-all.c i have my cdrom back. Last evening
making world succeeded
with a current system!
--
Fritz Heinrichmeyer mailto:[EMAIL PROTECTED]
FernUniversitaet Hagen, LG ES, 58084 Hagen (Germany)
tel:+49 2331/987-1166 fax:987-355 http://www-es.fernuni-hagen.de/~jfh
To
It seems Russell L. Carter wrote:
Yah... as before ok I fixed this by swapping in an ASUS K7M (forget the audio,
I can't figure that one out)
Working on it :)
For all of the bitching on Soren's ata driver, I'd like to
make this observation on a 500MHz/256MB ASUS K7 systemm, bonnie -s
It seems Alex wrote:
OK - here's the part relevant to ata:
ata-pci0: Intel PIIX4 ATA-33 controller port 0xfcf0-0xfcff at device
1.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
Bruce,
[...]
I've just found that read from /dev/bpfX never return
EAGAIN/EWOULDBLOCK.
It means that when you do a non blocking read and there is
no data you will
always get 0.
Does it suppose work this way?
I think it is a bug. Perhaps applications depend on it.
Untested
I checked the signatures on the files I downloaded from
current.freebsd.org/pub/FreeBSD/snapshots/i386/3.4-2124-STABLE/
and the following fail the MD5 check:
= from CHECKSUM.MD5 listing
= downloaded file.
68c70
MD5 (bin.cp) = c688b821316686fb8393b52ef9af1d86
---
MD5 (bin.cp) =
52 matches
Mail list logo
