RW wrote:
On Sun, 7 Jun 2009 21:11:58 -0400 (EDT)
Chuck Bacon c...@cape.com wrote:
Is there a better tool than burncd?
I've used burncd for CD's, but for DVDs I follow the handbook, and have
never had any problems:
I'm using an Intel DG33BU board with a SATA HD and SATA optical drives.
Using FreeBSD 7.1 AMD64 I get a kernel panic and subsequent file system
corruption when attempting to burn a cd using the burncd utility. I can
avoid this easily enough by using cdrecord and growisofs which work as
they
I'm using an Intel DG33BU board with a SATA HD and SATA optical drives.
Using FreeBSD 7.1 AMD64 I get a kernel panic and subsequent file system
corruption when attempting to burn a cd using the burncd utility. I can
avoid this easily enough by using cdrecord and growisofs which work as
they
*I thought it might be of interest that a recent change to the Makefile
for this port caused a build to halt with error code -1, gcc43
failure. I'm using 7.1 AMD64. When I replaced the Makefile with the
previous version (1.54) everything went smoothly.
I think this might be the line that
Desmond Chapman wrote:
I'm still stuck on the command line for this one. How do I give the user
permissions and allow an application such as k3b to access the device? Any and
all links to howtos or your own method is welcome.
Thank you in advance.
Steve Bertrand wrote:
Hi everyone,
To get right to the chase, FBSD 7.0, I plug in an external USB CD-ROM
device with a CD (of FreeBSD 7.0) and I want to mount it manually into
the filesystem.
The device shows up with a label, and appears as /dev/cd0 (in dmesg).
# mount /dev/cd0 /cdrom
Pollywog wrote:
On Monday 05 May 2008 03:11:52 Al Plant wrote:
Aloha list,
I am getting the same error on FreeBSD 7 RELEASE and 8. Current as David
is. CD's work fine.
Anybody know what this is?
I have been getting the errors too, whenever I reboot the machine, I find them
in the
When I burn a data cd using the burncd utility, I get this error at the
end of the session:
acd0: FAILURE-READ_BIG HARDWARE ERROR asc=0x3e ascq=0x2
When I burn a second disc, there is no error message, and I've yet to
have a bad burn. In fact I'm getting quality superior to that I was able
Yipee, I'm rich!
Unfortunately we'll have to split it with everyone on the list : (
I plan to buy a local lottery ticket with my winnings.
Sending From a 700Mhz PIII
David
___
freebsd-questions@freebsd.org mailing list
I have 6.2 installed on an ancient AT machine. I'd like to have the OS
shut off the hard drive when I halt the system from the KDE interface.
What do I edit, and what code do I use to achieve this?
Machine specs, if relevant:
GA-586TX2 (Gigabyte) Motherboard
AMD K-6/2 350Mhz CPU (running at
I have 6.2 installed on an ancient AT machine. I'd like to have the OS
shut off the hard drive when I halt the system from the KDE interface.
What do I edit, and what code do I use to achieve this?
David
___
freebsd-questions@freebsd.org mailing list
Not in this case. As I mentioned in a prior post, I tried booting
with the 7.0-BETA4 ISO and got the exact same results.
Response:
Yes, sorry about that; was in too much of a hurry and missed the later
posts.
David
___
Tim Daneliuk wrote:
[EMAIL PROTECTED] wrote:
On 25/12/2007, Tim Daneliuk [EMAIL PROTECTED] wrote:
I am building a new server out of both older and brand new
components. It is based on a Pentium D 925 and ABIT LG-95Z
mobo. The DVD-RW is a Lite-On about a year old with very
low hours on it.
scurvy wrote:
Hello!
I want to use freeBSD vary much, but I have a problem with instalation (freeBSD
6.2-RELEASE). It goes very slow (30% after 2 hours). Moreover I don't know
exactly which version (platform) I should use. For now I have used i386, but I
have the Intel E6600 (64bit) processor
Hi!
I am new with FreeBSD. I installed one day ago 7.0 beta3 and I try to
learn
and setup the system.
When I start K3b (KDE) I got a message:
No CD/DVD writer found.
K3b did not find an optical writing device in your system. Thus, you
will not
be able to burn CDs or DVDs. However, you can
15 matches
Mail list logo
