Re: Odd IDE / vinum problem on new 4.9-RC3 system

2003-10-20 Thread Rob Lahaye
Serious Signal wrote: Well colleagues, but both of you failed to specify your onboard IDE controlled dmesg lines! ;-) *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- [EMAIL PROTECTED] *** Dmitry, Good catch! atapci0: VIA 82C686 ATA100 controller port 0xe000-0xe00f at device 7.1

Re: 4.9-PRE - if_xe.ko failed to register

2003-10-20 Thread Kevin Oberman
Date: Wed, 01 Oct 2003 09:25:09 -0400 From: Zeno Sirbu [EMAIL PROTECTED] Sender: [EMAIL PROTECTED] Hi, Maybe this message should go to mobile. Machine: IBM ThinkPad 600 (Model 2645-85U) PII-300, 64 RAM, 4GB HDD Network card: Xircom CE3B-100BTX (pcmcia) I've SUP yesterday (Sept 30)

Expert input required: P4 odd signals, no apparent memory fault, DISABLE_PSE?

2003-10-20 Thread Jan Grant
I'm tracking -STABLE on a 1.8GHz P4 with 512MB of memory. Roughly since the PAE changes were MFCed, I've been seeing memory-corruption-related errors under specific circumstances: for example, a run of portsdb -fUu can be guaranteed to generate SIGBUS, SIGILL and SIGSEGVs in a handful of

Re: Expert input required: P4 odd signals, no apparent memory fault, DISABLE_PSE?

2003-10-20 Thread Mike Tancsa
How recent is your copy of RELENG_4 ? The PSE disable code was committed to the tree already as well as a fix so it would work with APM on the 17th. By default it is disabled. If you look at your dmesg.boot you should see Warning: Pentium 4 CPU: PSE disabled ---Mike At 11:38 AM

Re: Expert input required: P4 odd signals, no apparent memoryfault, DISABLE_PSE?

2003-10-20 Thread Jan Grant
On Mon, 20 Oct 2003, Mike Tancsa wrote: How recent is your copy of RELENG_4 ? The PSE disable code was committed to the tree already as well as a fix so it would work with APM on the 17th. By default it is disabled. If you look at your dmesg.boot you should see Warning: Pentium 4 CPU: PSE

SIS 651 chip set, ata problem

2003-10-20 Thread Peter Spekreijse
Hi! We're trying to install FreeBSD 4.9/RC on a system with a Asus P4S533-MX board (SIS 651 chipset). This does not work with UDMA enabled. Is this problem known? Is there a work-around? Greetings, Peter. ___ [EMAIL PROTECTED] mailing list

Solved. Re: Expert input required: P4 odd signals, no apparent memoryfault, DISABLE_PSE?

2003-10-20 Thread Jan Grant
On Mon, 20 Oct 2003, Jan Grant wrote: On Mon, 20 Oct 2003, Mike Tancsa wrote: How recent is your copy of RELENG_4 ? The PSE disable code was committed to the tree already as well as a fix so it would work with APM on the 17th. By default it is disabled. If you look at your dmesg.boot

Re: SIS 651 chip set, ata problem

2003-10-20 Thread Torfinn Ingolfsen
On Mon, 20 Oct 2003 20:29:50 +0200 (CEST) Peter Spekreijse [EMAIL PROTECTED] wrote: Hi! We're trying to install FreeBSD 4.9/RC on a system with a Asus P4S533-MX board (SIS 651 chipset). This does not work with UDMA enabled. Is this problem known? Is there a work-around? Yes, this problem

hpt374 + freebsd 4.8 (epox mainboard)

2003-10-20 Thread Lukasz Kowalczyk
i have that on boot: ata0: reseting device ...done acd0: MODE_SENSE_BIG command timeout - reseting and next time , next time , and next time .. : hardware/software configuration: freebsd 4.8 epox mainboard 4pca3+ (intel 875p) hpt374 two maxtor hard disks (raid 1) when i turn off

kern/53717: 4.8-RELEASE kernel panic (page fault)

2003-10-20 Thread Keith Lee
Anyone knows howt to solve this prob? Keith. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]