leased with the results.
I was able to get bluetooth tethering to work with my Blackberry fairly
easily. I still need to confirm that WPA2 works when I get to the office on
Monday. If it does, I'm going to go through with the update.
-Bill
> Since this was just seen, and the patch below validated as working I wanted
> to send general email to capture this:
>
> The Lenovo X60 can have issues with long ping times, this is a KNOWN
> hardware problem, and Intel is working with IBM/Lenovo, a final 'fix' has
> not been decided on yet. Ne
> Hello Bill,
>
> * Bill Paul <[EMAIL PROTECTED]> wrote:
> > > - Switching from and to promiscuous mode takes 7 seconds. All packets
> > > are dropped in the mean time.
> >
> > The SIOCSIFFLAGS handler in re_ioctl() currently just takes a short
> * Bill Paul <[EMAIL PROTECTED]> wrote:
> > > It's more likely a problem with the multicast filter programming.
> > > IPv6 is all about the multicasting (neighbord discovery depends on it
> > > to work correctly). I can't explain why it's not
> > On Tue, Nov 28, 2006 at 08:46:00PM +0100, Ed Schouten wrote:
> > > Hello,
> > >
> > > I'm running FreeBSD 6.2-PRERELEASE on my new desktop. It has the
> > > following hardware:
> > >
> > > - Intel Core 2 Duo 6400
> > > - Asus P5B motherboard
> > > - On-board Realtek NIC (8168B/8111B)
> On Tue, Nov 28, 2006 at 08:46:00PM +0100, Ed Schouten wrote:
> > Hello,
> >
> > I'm running FreeBSD 6.2-PRERELEASE on my new desktop. It has the
> > following hardware:
> >
> > - Intel Core 2 Duo 6400
> > - Asus P5B motherboard
> > - On-board Realtek NIC (8168B/8111B)
> >
> > For som
be one of the issues hitting us as well.
Switching from testing the descriptor completion bits to using the
consumer indexes should be pretty straightforward. It's worth a shot
at any rate.
-Bill
--
=
-Bill P
test system up and running with your driver code,
and it doesn't take that long to run. Of course, I'm biased since I've
run the tests many times, and have easy access to the hardware and
software.
-Bill
--
==
> Bill Paul wrote:
> > [Charset ISO-8859-1 unsupported, filtering to ASCII...]
> >
> >>On 10/19/06, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> >>
> >>>On Thu, Oct 19, 2006 at 02:18:13PM -0700, Jack Vogel wrote:
> >>>
> >>>
ths and generates hundreds of
thousands of interrupts per second. You'd be amazed at the sort of
things you can discover with it. The downside of course is that a
Smartbits with gigE ports isn't cheap, but I'd be surprised if Intel
didn't have one kicking around somewhere.
-Bi
console boot blocks, but nothing else. I've found in many cases
that I need "boot0cfg -o packet " to make the first stage
bootstrap successfully load the second stage if I've done something
weird with the geometry.
-Bill
--
==
ask for this basic
information. The more I have to ask, the more annoyed I get, and the
less inclined I am to help anyone. The shit you don't think is important?
It's important. So spill it already.
-Bill
--
=
ator is known to work with this chip. But try the fix above
first.
-Bill
--
=====
-Bill Paul(510) 749-2329 | Senior Engineer, Master of Unix-Fu
[EMAIL PROTECTED] | Wind River Systems
=
uot;" up
# ifconfig ndis0 ssid "yourssid" bssid up
Don't fiddle with the channel setting. Windows drivers don't let you
set the channel unless you're in ad-hoc mode. (Some drivers erroneously
process channel selectin requests in infrastructure mode too, but
the results can be unpredictable.)
-Bill
--
==
> Additionally I can't set the mode to 11g:
You don't have to do that. It'll associate with 11g automatically.
> Is anybody else using this device with FreeBSD 6.0?
I've tested the 2200BG myself with the NDISulator 6.0 and I've been
able to get it to
I couldn't find the first e-mail in this thread, so I don't know which
laptop you have. Check to see if it's one of the ones mentioned here:
http://rfswitch.sourceforge.net/?page=laptop_matrix
If so, you may need some special software to make the switch work.
-Bill
--
=
it until after the
release is cut before I can merge it into 6.x.
Out of curiosity, what card do you have?
-Bill
--
=
-Bill Paul(510) 749-2329 | Senior Engineer, Master of Unix-Fu
[EMAIL PROTECTED] | Wind River Systems
at is says? It says "Bill Paul." It does *NOT*
say "Paul Bill," does it now. WELL DOES IT!!?!?!
No, it damn well doesn't! And yet, for some incomprehensible reason.
the majority of you nitwits seem to think it does!!
Get this through your miserable
> Is this just me,
Yes, it is just you. You probably don't have the card seated properly, or
it's posessed by Satan. (Of course it's a PNIC so that's a given.) Forgive
me if I don't get to worked up over it.
And I don't care what fxp does in the same box.
-Bill
To Unsubscribe: send mail to [E
19 matches
Mail list logo