Re: FreeBSD 11.1 ixl(4) interface does not negotiate at 100 Mbit/s

I'm guessing these are 10G copper LOMs using X722; those don't support 100Mb speeds. - Eric On Mon, Mar 19, 2018 at 8:41 AM Slawa Olhovchenkov wrote: > On Mon, Mar 19, 2018 at 03:53:03PM +0100, Patrick M. Hausen wrote: > > > Hi all, > > > > any ideas why a current RELENG_11_1

Re: intel 10gbe nic bug in 10.3 - no carrier

On Tue, Jan 10, 2017 at 2:38 AM Daniel Genis wrote: > Hello everyone, > > we're trying to tackle a rare bug that is very hard to debug. > > Our 10.3-RELEASE servers can panic boot and subsequently can come up > without network (2x - no carrier). We've seen this on

Re: buildworld build times 10-stable vs. 11-stable

On Mon, Jan 16, 2017 at 8:59 AM Jan Bramkamp wrote: > >/etc/src-env.conf`, instruct the kld rc.d script to load filemon with > `sysrc kld_list+=" filemon"` and use the rc.d script to load the kernel > module with `service kld start` (or reboot). > Why would you put that line

Re: dev.ix.0.queueX.interrupt_rate

What's strange about it? The interrupt rate only changes if traffic goes out on the queue, and so if whatever applications you use don't utilize the core the queue is bound to, then the interrupt rate won't change. Or are you confused about the units? I know ixl(4) uses usecs instead of Hz, so

Re: Xeon D-1540 Support

Yeah; you can run FreeBSD 10.1 and 11-CURRENT on an X10SDV-TLN4F. If you use stable/10 or CURRENT, you can also use the 10gig ethernet ports out of the box, too. On Wed, Jun 3, 2015 at 6:31 AM Will Green w...@sundivenetworks.com wrote: Hello, Has anyone had any success running FreeBSD 10.1 on