On Fri, 15 Nov 2002, Larry Rosenman wrote:
Set COMPAT3X=yes in /etc/make.conf, re-cvsup, including the compat stuff,
and re-make world.
On a related note, I had problems with FrontPage extensions after the
upgrade. The following worked for me.
cd /usr/ports/misc/compat3x
make make install
earlier doesn't
: seem to exist on these machines. All of these have the problem:
:
: 4.6-STABLE #1: Fri Jul 12
: 4.6-STABLE #1: Mon Jul 15
: 4.6-STABLE #0: Mon Jul 8
:
: --
: Jim Weeks
:
:
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-stable in the body
. You will only see the errors from the console.
--
Jim Weeks
On Wed, 2 May 2001, Jano Lukac wrote:
Hi,
My freebsd 4.3-release (cvsupped to stable a few days ago) box stopped
responding to everything except ping yesterday. I was too lazy to attach a
monitor, so I simply gave it the three
Did you run mergemaster?
--
Jim Weeks
On Tue, 17 Apr 2001, Simon Edwards wrote:
Hiya,
I just installed 4.3 RC3 from cdrom (and via FTP, when the cd didn`t work) :)
and I am getting the error :
# top
top: nlist failed
I had a look at the handbook, and it says that either kernel
, mergemaster, and buildkernel
all with the same src tree, I don't know what it could be :-(
--
Jim Weeks
On Tue, 17 Apr 2001, Simon Edwards wrote:
On Tue, Apr 17, 2001 at 10:33:41AM -0400, Jim Weeks wrote:
I didn't ask, but you did reboot your new kernel?
Yeah, that was the first thing i
I believe placing the following line in your Kernel config rather than the
default (device ep) should work.
device ep0 at isa? port 0x220 irq 10
--
Jim Weeks
On Mon, 26 Mar 2001, Hellmuth Michaelis wrote:
Hi,
i have one 3Com 3C509 in a 4.x-stable machine. At boot
On Sat, 14 Oct 2000, Erik Trulsson wrote:
Unless I am badly mistaken you can use exactly the same syntax in
/boot/kernel.conf and boot -c so you can put the lines above (minus
prompts) in /boot/kernel.conf and it should work fine.
Well, I thought I had tried this when the box was running
I know for a fact this works. I have done binary upgrades straight from
2.2.6 to 4.0-STABLE snapshots.
One note, the next time you SVSUP and build you should rebuild
/usr/src/release/sysinstall since it doesnt automatically build during
makeworld.
--
Jim Weeks
On Sat, 30 Sep 2000, Crist J
On Sat, 23 Sep 2000, Brad Knowles wrote:
Note that ECC RAM usually helps in this case, but it is possible
for there to be so many errors that even ECC can't save you.
An interesting observation.
I have a couple of machines running ECC chips that produce this
error on occasion.
anyone else which files you have made changes to that
should not be changed during upgrade. Just pay attention to the file
names and the diffs on the screen before installing new files.
Good luck,
Jim Weeks
A mind is a terrible thing to lose! How I miss mine..
To Unsubscribe: send
to late in the boot sequence to fix this problem.
Jim Weeks
- A mind is a terrible thing to lose! How I miss mine...
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
Which much venom, Brennan W Stehling wrote:
I am not a moron that does not read any documentation. So let me lash
back a bit here, maybe you should read someones full email and the rest of
the thread before flaming them.
You only come off as a prick and discourage people from using
I have seen a few messages in the mail archives about putting pico.bsd on
small hardrives to implement a gateway. Also if you have another small hd
lying around maybe even a 40mb you could then use the 200 just for /usr
You don't have to worry about the bios limit as long as you keep the
root
This may be your problem. You either need to specify all, or each one
individually. I have had trouble using the all option
src-all
src-crypto
src-eBones
src-secure
You shouldn't need to use this in 3.x-stable
USA_RESIDENT= YES
It is not necessary to upgrade from 3.2 if you
it will
still dial during boot.
Good luck,
Jim Weeks
Lev Serebryakov wrote:
Whet it was 3.3-STABLE (really -- 3.3-RELEASE with stable kernel)
everything works perfectly. PPP doesn't call my ISP until I (or
somebody in local network) need connection.
But with new system (
.
Jim Weeks wrote:
I installed fresh on an old machine yesterday and when I try to make the
new kernel I get this message,
In file included from ../../msdosfs/msdosfs_denode.c:66:
../../msdosfs/denode.h:282: macro '__P' used with too many (2) args
*** Error code 1
The only thing I have added
16 matches
Mail list logo