On Tue, Mar 19, 2013 at 01:56:29PM +0900, YongHyeon PYUN wrote:
> On Mon, Mar 18, 2013 at 05:19:11PM +0400, Michael BlackHeart wrote:
> > 2013/3/18 YongHyeon PYUN :
> > > On Sat, Mar 16, 2013 at 01:08:06PM +0400, Michael BlackHeart wrote:
> > >> Hello there. I've got a couple of things I don't get
On Mon, Mar 18, 2013 at 05:19:11PM +0400, Michael BlackHeart wrote:
> 2013/3/18 YongHyeon PYUN :
> > On Sat, Mar 16, 2013 at 01:08:06PM +0400, Michael BlackHeart wrote:
> >> Hello there. I've got a couple of things I don't get or can't handle.
> >>
> >
> > [...]
> >
> >> re0@pci0:4:0:0: class=0x020
2013/3/18 Chuck Swiger :
> Hi--
>
> On Mar 18, 2013, at 11:16 AM, Jeremy Chadwick wrote:
>>> You've got an Intel P45 northbridge controller which supports dual-channel
>>> mode, but that only works for DIMMs of the same size. You might be able to
>>> get 6GB if you place the DIMMs in slots 1 and
Hi--
On Mar 16, 2013, at 2:08 AM, Michael BlackHeart wrote:
> Hello there. I've got a couple of things I don't get or can't handle.
>
> I'm running:
> FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #0 r248347:
> Sat Mar 16 03:20:58 MSK 2013
> root@diablo.miekoff.local:/usr/obj/usr/src
2013/3/18 YongHyeon PYUN :
> On Sat, Mar 16, 2013 at 01:08:06PM +0400, Michael BlackHeart wrote:
>> Hello there. I've got a couple of things I don't get or can't handle.
>>
>
> [...]
>
>> re0@pci0:4:0:0: class=0x02 card=0x512c1462 chip=0x816810ec rev=0x02
>> hdr=0x00
>> vendor = 'Realt
On Sat, Mar 16, 2013 at 01:08:06PM +0400, Michael BlackHeart wrote:
> Hello there. I've got a couple of things I don't get or can't handle.
>
[...]
> re0@pci0:4:0:0: class=0x02 card=0x512c1462 chip=0x816810ec rev=0x02
> hdr=0x00
> vendor = 'Realtek Semiconductor Co., Ltd.'
> dev
Hello there. I've got a couple of things I don't get or can't handle.
I'm running:
FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #0 r248347:
Sat Mar 16 03:20:58 MSK 2013
root@diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64
1st of all, on dmesg there's something strange. It
> Not if you're using any third party modules.
> What does 'kldstat' tell you?
kernel + acpi.ko + linux.ko, as I already mentioned in another email.
Petr
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stab
On Mon, Nov 14, 2005 at 06:02:35AM +0100, Petr Holub wrote:
> > Did you remember to rebuild any modules you are using when you
> > upgraded?
>
> cd /sys/i386/conf/
> config KLOBOUCEK
> cd ../compile/KLOBOUCEK
> make cleandepend; make depend && make && make install
> as usual. I assume that's suffi
> > 2) I get rather regular freezes in X when running GL with drm acceleration;
> >I've rebuilt both xorg-server-snap and dri-devel from sources
> >but it freezes still after couple of seconds of glxgears (while
> >it worked fine on BETA4 achieving slightly above 2100 fps)
>
> Did you
> Did you remember to rebuild any modules you are using when you
> upgraded?
cd /sys/i386/conf/
config KLOBOUCEK
cd ../compile/KLOBOUCEK
make cleandepend; make depend && make && make install
as usual. I assume that's sufficient.
The only thing I'm not sure of now is the linux emulation...
Thanks
On Mon, Nov 14, 2005 at 05:39:52AM +0100, Petr Holub wrote:
> Hi,
>
> since I've upgraded from 6.0-BETA4 to 6.0-RELEASE (using binary
> upgrade on contrary to 6.0-BETA4, which was binary from BETA2, which
> was clean install ;-) ), I'm experiencing multiple problems which were
> not present on BET
Hi,
since I've upgraded from 6.0-BETA4 to 6.0-RELEASE (using binary
upgrade on contrary to 6.0-BETA4, which was binary from BETA2, which
was clean install ;-) ), I'm experiencing multiple problems which were
not present on BETA4:
1) when rebooting, the system freezes on message
Shutting down AC
13 matches
Mail list logo