On Thu, Jun 21, 2018 at 08:41:21PM -0700, Carl Johnson wrote:
> Vincent Stemen writes:
>
> > You must load radeonkms.ko after the system is fully booted.
> >
> > # kldload radeonkms
> >
> > That automatically loads the other 3 modules and initializes the console
> > where
> > the console tex
On Sun, Jun 24, 2018 at 07:53:42PM +0200, Niclas Zeising wrote:
> On 06/23/18 00:40, Mark Saad wrote:
> > Vincent
> >I used the scfb driver in openbsd land for a work project
> >. Currently I am using 11-STABLE with the Radeon driver but at
> >one point I had a different card under 11.0
On 06/23/18 00:40, Mark Saad wrote:
Vincent
I used the scfb driver in openbsd land for a work project . Currently I am
using 11-STABLE with the Radeon driver but at one point I had a different card
under 11.0 that didn’t work unless I used the scfb driver .
Hi!
If you are using FreeBSD 11.
Vincent
I used the scfb driver in openbsd land for a work project . Currently I am
using 11-STABLE with the Radeon driver but at one point I had a different card
under 11.0 that didn’t work unless I used the scfb driver .
---
Mark Saad | nones...@longcount.org
> On Jun 21, 2018, at 11:41 PM,
Vincent Stemen writes:
> You must load radeonkms.ko after the system is fully booted.
>
> # kldload radeonkms
>
> That automatically loads the other 3 modules and initializes the console where
> the console text goes into higher resolution mode. Then X and the desktop
> environments work and
On Wed, Jun 20, 2018 at 05:13:17PM -0400, Mark Saad wrote:
> Vincent
> I am running 11.2-PRERELEASE with a Cedar PRO [Radeon HD 5450/6350]
> and I dont have any issues like that
>
> here is what I do to get it working for me; and I have used more or
> less the same setup since 10.3-RELEASE
>
> I
